Nondestructive inspection (NDI) methods for cast iron are used to ensure that the parts supplied perform as required by the purchaser. This article focuses on the principal nondestructive methods used to inspect for anomalies in cast irons and to determine if the volume, shape, size, or number of these anomalies exceeds the maximum allowed by the purchaser. The nondestructive methods include visual inspection, dimensional inspection, liquid penetrant inspection, magnetic-particle inspection, eddy-current inspection, radiographic inspection, ultrasonic inspection, resonant testing, and leak testing. The technique, strengths, and weaknesses of each of the nondestructive methods are also discussed.

Thermal spray coatings are often modified or treated by a variety of post-coating operations to transform the as-coated material into a final product based on coating composition and application. This article provides a detailed description of the post-coating operations that fall under two basic categories: surface treatments, such as dimensional, non-dimensional, and geometric finishing; and internal treatments, such as sealing, heat treating, and peening. It also describes various inspection and testing methods, including destructive and non-destructive inspections, often employed after post-coating operations.

Nondestructive testing (NDT), also known as nondestructive evaluation (NDE), includes various techniques to characterize materials without damage. This article focuses on the typical NDE techniques that may be considered when conducting a failure investigation. The article begins with discussion about the concept of the probability of detection (POD), on which the statistical reliability of crack detection is based. The coverage includes the various methods of surface inspection, including visual-examination tools, scanning technology in dimensional metrology, and the common methods of detecting surface discontinuities by magnetic-particle inspection, liquid penetrant inspection, and eddy-current testing. The major NDE methods for internal (volumetric) inspection in failure analysis also are described.

As additive manufacturing (AM) gains maturity as a manufacturing technique for production in many industrial sectors, inspection as a tool for quality control gains importance. This article is focused on the field of dimensional metrology, which is typically concerned with the verification of size, location, form, and surface topography of geometric features. This is split into two categories: geometric (size, location, form) and surface measurement (topography). The article also focuses on applicable inspection technologies, and it discusses the context within digital thread manufacturing. A case study on the Digital Inspection Requirements Enhancing Coverage and Traceability (DIRECT) is also presented.

Additive manufacturing (AM) is the process of joining materials to make parts from three-dimensional (3D) model data, usually layer upon layer, as opposed to subtractive manufacturing and formative manufacturing methodologies. This article discusses various defects in AM components, such as porosity, inclusions, cracking, and residual stress, that can be avoided by using vendor recommended process parameters and approved materials. It describes the development of process-structure-property-performance modeling. The article explains the practical considerations in nondestructive evaluation for additively manufactured metallic parts. It also examines nondestructive testing (NDT) inspection and characterization methods for each of the manufacturing stages in their natural order. The article provides information on various inspection techniques for completed AM manufactured parts. The various electromagnetic and eddy current techniques that can be used to detect changes to nearsurface geometric anomalies or other defects are also discussed. These include ultrasonic techniques, radiographic techniques, and neutron imaging.

This article describes the capabilities, limitations, advantages, and disadvantages of the powder metallurgy (PM) gear manufacturing process. It discusses the types of gears that can be produced by PM and presents the design guidelines for PM gears. The article provides information on gear tolerances and performance of PM gears. It also explains various procedures to inspect and test the mechanical properties, dimensional specifications, and surface durability (hardness).

The design of forging operations; consisting of dies, fixturing, and parts; requires a consistent and unambiguous method for representing critical dimensions and tolerances. This article presents a dimensioning process, based on tooling points and datum planes, with the potential to simplify geometries while minimizing tolerance stack-ups. The method also facilitates inspection liaison between vendors and users because fixturing is easy to duplicate and tooling points are consistent from forging to finish-machined part. The article focuses on the most common dimensional tolerances for closed-die forgings, including finish allowances for machining, length and width tolerances, die-wear tolerance, match tolerances, die-closure or thickness tolerances, straightness and flatness tolerances, radii tolerances, flash-extension tolerances, and surface tolerances. It also contains a convenient summary in the form of a checklist.

Photochemical machining (PCM), also known as chemical blanking, is a metal-etching process that uses a photoresist to define the locations where the metal will be etched. This article describes the major steps used in the PCM process, namely, the preparation of the phototool, selection of the metal, preparation of the workpiece, masking with photoresists, etching, and stripping and inspection. The article reviews various design considerations for the PCM process. These include dimensional limitations, tolerances, and edge quality. The article also discusses the advantages, disadvantages, and applications of the PCM process.

In-process inspection during composite material lay-up is essential if the structural, dimensional, and environmental performance designed into a part is to be consistently achieved. This article discusses the requirements to be met by the facilities and equipment to produce high-quality composites. It reviews the procedures that are allowed and prohibited in controlled-contamination areas of lay-up. The article emphasizes significant areas, such as material control and lay-up process, in which quality-control personnel can be effective in preventing production problems. It concludes with a discussion on automated tape laying and fiber placement, as well as the numerically aided lay-up process.

Additive manufacturing, as the first fully digital manufacturing process, is critically dependent on data, including the input materials, the process parameters guiding the three-dimensional printing process execution, any postprocessing steps, and any inspections performed on the printed coupons and/or parts, to name just a few examples. This article presents the standards to enable findable, accessible, interoperable, and reusable (FAIR) data. It then discusses three main types of data models that are used to capture different levels of detail and granularity of data: conceptual, logical, and physical. Different approaches and techniques with their own strengths and weaknesses are developed to model data. Four of the major types of data models include hierarchical, relational, object-oriented, and network/graph-based. The article also presents the evolution of data management approaches. It then describes the characteristics of effective logical data models.

Holography is basically a two-step process for creating a whole three dimensional image of a diffusely reflecting object having some arbitrary shape. This article discusses the advantages, disadvantages and applications of using the optical holography method in nondestructive evaluation. It also discusses the types of acoustical holography, including liquid-surface acoustical holography and scanning acoustical holography. The article concludes by comparing liquid-surface and scanning systems.