Fig. 6 Comparison of volume shrinkage and dimensional change for flake graphite (FG), compacted graphite (CG), and spheroidal graphite (SG) poured into green sand molds. A 76.4 mm (3 in.) diameter mold was used. Source: Ref 3 More

Fig. 34 (a) Numerical results regarding the dimensional change of the top and bottom face of cylindrical specimens after induction surface hardening. (b) Schematic sketch of the dimensional change. Source: Ref 75 More

Fig. 17 Distribution of dimensional change as a result of flame hardening. (a) Change in pitch diameter of converter gear hubs made of 1052 steel. Gear teeth on inside diameter were heated for a total of 9.5 s, before being quenched in oil to provide a depth of hardness of 0.9 mm (0.035 More

Fig. 2 Effect of amount of graphite added on the dimensional change of copper infiltrated and uninfiltrated sintered steel More

Fig. 8 Dimensional change of F-0008 atomized plus free-machining agents More

Fig. 11 Dimensional change of F-0008 sponge plus free-machining agents More

Fig. 13 Dimensional change of FC-0208 atomized plus free-machining agents More

Fig. 7 Effect of the percentage of −325 mesh fraction on the dimensional change of 410L powder for sintering in hydrogen sintering, at various temperatures and for two sintering times (30 and 60 minutes). Source: Ref 5 More

Fig. 9 Dimensional change data for a number of PM stainless steels as functions of sintering temperature, green density, and sintering atmosphere. Sintering time, 45 min. Lubricant, 1.0% Acrawax C. (a) 303L dissociated ammonia sinter. (b) 303L H 2 sinter. (c) 304L dissociated ammonia sinter More

Fig. 3(a) Mechanical properties and dimensional change of dissociated ammonia sintered 303L as functions of sintering temperature and sintered density (duration 45 min.) More

Fig. 3(b) Mechanical properties and dimensional change of hydrogen sintered 303L as functions of sintering temperature and sintered density (duration 45 min.) More

Fig. 3(c) Mechanical properties an dimensional change of dissociated ammonia sintered 304L as functions of sintering temperature and sintered density (duration 45 min.) More

Fig. 3(d) Mechanical properties and dimensional change of hydrogen sintered 304L as functions of sintering temperature and sintered density (duration 45 min.) More

Fig. 3(e) Mechanical properties and dimensional change of dissociated ammonia sintered 316L as functions of sintering temperature and sintered density (duration 45 min.) More

Fig. 3(f) Mechanical properties and dimensional change of hydrogen sintered 316L as functions of sintering temperature and sintered density (duration 45 min.) More

Fig. 3(g) Mechanical properties and dimensional change of hydrogen sintered 409L as functions of sintering temperature and sintered density (duration 45 min.) More

Fig. 3(h) Mechanical properties and dimensional change of hydrogen sintered 410L as functions of sintering temperature and sintered density (duration 45 min.) More

Fig. 3(i) Mechanical properties and dimensional change of dissociated ammonia sintered 430L as functions of sintering temperature and sintered density (duration 45 min.) More

Fig. 3(j) Mechanical properties and dimensional change of hydrogen sintered 430L as functions of sintering temperature and sintered density (duration 45 min.) More

Fig. 3(k) Mechanical properties and dimensional change of dissociated ammonia sintered 434L as functions of sintering temperature and sintered density (duration 45 min.) More