This article describes the mechanisms of differential corrosion cells corrosion, microbiologically influenced corrosion, and stray direct current corrosion. It discusses the most common causes and contributing factors for corrosion and stress-corrosion cracking, as well as prevention, mitigation, detection, and repair processes.

Principles of metallic corrosion play a fundamental role in developing industrial processes that employ corrosion for constructive purposes. This article examines the changes in kinetics that occur with differentially small potential changes around the equilibrium electrode potentials of two reversible electrodes, such as copper and silver electrodes, in an electrochemical system. It provides a schematic illustration of a reversible cell with copper and silver electrodes to determine a reversible cell potential between the electrodes. An electrode becomes irreversible when the electrode reactions are displaced from equilibrium and the electrode potential is no longer at the equilibrium potential. The article describes irreversible cell potential by using galvanic cells, electrolytic cells, and corrosion cells.

This article provides a discussion on the operation of various methods and sensors that have been used or have the potential to be used for on-line, real-time monitoring of localized corrosion. These include the electrochemical noise (ECN) method, nonelectrochemical methods, the galvanically coupled differential flow cell, galvanically coupled crevice cell, coupled multielectrode sensor, and electrochemical biofilm activity sensor.

This article describes the corrosion mechanisms, challenges, and control methods in service water distribution systems. It provides a discussion on typical designs and water qualities for distribution systems used in fossil-fueled and nuclear power plants. The article also explains the techniques for controlling corrosion in service water systems.

Filiform corrosion has been observed to occur under a wide range of organic coatings and proceeds with the same general characteristics on steel, aluminum, and magnesium. This article describes the standard tests for filiform corrosion, characteristics and mechanisms of filiform corrosion in steels, as well as coated aluminum and magnesium. It concludes with information on the prevention and mitigation of filiform corrosion accomplished through the adjustment of the environment and changes in the substrate and coating systems.

This article describes the methods of wear measurements and a model of corrosive wear in mill atmospheres. It explains the polarization curves of pyrrhotite and high-carbon low-alloy steel in a quartzite slurry with examples. The surfaces of pyrrhotite in contact with mild steel or stainless steel affected by galvanic interaction are discussed. The article contains a table that lists the results of laboratory marked ball wear tests for three types of steel balls in wet grinding of magnetic taconite. It also provides information on the mechanism of electrochemical interaction and relative significance of corrosion and abrasion in wear. Galvanic interactions in multielectrode systems are reviewed. The article presents a case history on the material selection for grinding balls to minimize corrosion loss and the adverse effect on flotation.

This article describes the ideal performance of various low-temperature and high-temperature fuel cells that depends on the electrochemical reactions that occur between different fuels and oxygen. Low-temperature fuel cells, such as polymer electrolyte, alkaline, and phosphoric acid, and high-temperature fuel cells, such as molten carbonate and solid oxide, are discussed. The article contains tables that provide information on the evolution of cell-component technology for these fuel cells. It concludes with information on the advantages and limitations of the fuel cells.

This article provides an overview of common analytical tools used as part of the process of providing practical information regarding the causes of a coating problem or failure. The common analytical tools include Fourier transform infrared spectroscopy, differential scanning calorimetry, scanning electron microscopy-energy dispersive X-ray spectroscopy, chromatography, and electrochemical impedance spectroscopy. Test cabinets and standard test environments for laboratory analysis are reviewed. The article describes non-standard simulation testing and case studies of simulated environments for coating failure analysis.

Corrosion resulting from the presence and activities of microbes on metals and metal alloys is generally referred to as microbiologically influenced corrosion (MIC). This article describes the biofilm formation and structure and microbial processes influencing corrosion. It also discusses the electrochemical techniques used to study and monitor MIC and presents examples of their applications to MIC.

Implant debris is known to cause local inflammation, local osteolysis, and, in some cases, local and systemic hypersensitivity. The debris can be stainless steel, cobalt alloy, and titanium alloy, and soluble debris obtained due to wear from all orthopedic implants. This article addresses the biologic aspects of implant debris, both locally and systemically. It describes debris-induced local effects, particle-induced proinflammatory responses, and debris-induced systemic effects. The article concludes with a discussion on the four systemic effects of implant debris, namely, neuropathic effects, hypersensitivity effects, carcinogenicity, and general toxicity.

This article explains the applications of continuous electroplated steel. For each category of application, the type of coating needed and the key attributes of the coating are discussed. The bulk of the article describes electrodeposition technology, including plating line components and process classification.

This article focuses on the effects of microscopic organisms and the by-products they produce on the electrochemical corrosion of metals. The general characteristics of the microorganisms that facilitate their influence on the electrochemistry of corrosion are discussed. The industries most often reported as being affected by microbiological corrosion are listed, along with the organisms usually implicated in the attack. The article explains that the influence of organisms can be addressed successfully for a corrosion control program by using four types of evidence: metallurgical, microbiological, chemical, and electrochemical. It provides information on the microbiologically influenced corrosion (MIC) of irons and steels, passive alloys (austenitic stainless steels), aluminum alloys, copper alloys, and composites. The article reviews the formation of microbial biofilms and macrofouling films. It also describes the general approaches taken to prevent MIC.

A close-interval survey (CIS) is a series of structure-to-electrolyte direct current potential measurements performed at regular intervals for assessing the level of cathodic protection (CP) on pipelines and other buried or submerged metallic structures. This article describes the equipment required to perform the CIS. It provides a discussion on the activities that should be performed during the preparation and execution of the CIS. The dynamic stray current identification and compensation by CIS is discussed briefly. The article also explains various factors involved in the validation of CIS data. It concludes with information on CIS data interpretation.

This article explains how an engineer might go about assessing the risk of microbiologically influenced corrosion (MIC) in an industrial situation. It describes the systems that are susceptible to the effects of MIC by sulfate-reducing bacteria (SRB). The article discusses the effects of microorganisms other than SRB on metals. SRB-related problems, which are the most common MIC issue, are also explored. The article describes the test procedures used to enumerate microbiological populations. It concludes with a discussion on risk assessment based on operating conditions.

This article focuses on microbiologically influenced corrosion (MIC) of military assets. It discusses the mechanisms of MIC in hydrocarbon fuels and atmospheric, immersion, and buried environments with specific examples. The article describes the behavior of metals and alloys, namely, copper alloy, nickel alloy, titanium and titanium alloys, aluminum alloys, stainless steels, and carbon steel in immersion environments.

This article is a comprehensive collection of terms related to corrosion fundamentals, testing, and protection.