Thermal spray coatings are often modified or treated by a variety of post-coating operations to transform the as-coated material into a final product based on coating composition and application. This article provides a detailed description of the post-coating operations that fall under two basic categories: surface treatments, such as dimensional, non-dimensional, and geometric finishing; and internal treatments, such as sealing, heat treating, and peening. It also describes various inspection and testing methods, including destructive and non-destructive inspections, often employed after post-coating operations.

This article outlines the requirements and methods associated with the inspection of brazements. It emphasizes the incorporation of these requirements into the overall quality system. The article reviews the acceptance limits, design limitations, and nondestructive and destructive inspection techniques involved in the brazement inspection. Selected case studies are also provided for further reference.

Before the quality of a soldered joint can be evaluated, the components that are required for the formation of a good soldered joint should be reviewed. These components are solder, applied heat, and solderable surface. This article discusses each of these as well as the end-use requirements and joint configurations required for the formation of a good soldered joint. It focuses on the visual, automatic, and destructive inspection techniques for determining overall joint quality.

Inspection involves two types of testing, namely, destructive and non-destructive. This article provides an overview of the various inspection plans, such as first-article inspection and periodic tests done by destructive metallurgical testing and the final inspection done by the application of non-destructive technology. It describes the processes involved in destructive methods, such as surface hardness measurement, induction hardening pattern and heat-affected zone inspection, and the examination of microstructure before and after induction hardening. It also discusses non-destructive evaluation techniques for defect detection and microstructure characterization as well as non-destructive evaluation for real-time monitoring of induction process.

Fracture control is a systematic process to prevent fracture during operation that depends on the criticality of the component, the economic consequences of the structures being out of service, and the damage that would be caused by a fracture failure. This article describes the key principles of fracture control and reviews the concepts of damage tolerance analysis. It further presents practical guidelines to obtain useful and reasonable answers from damage tolerance analysis. The article concludes with information on fracture mechanics and fatigue design.

The success of a reliable non-destructive evaluation (NDE) application depends greatly on the expertise and thoroughness of the NDE engineering that is performed. This article discusses the general considerations of NDE in terms of NDE response and NDE system management and schedule. It describes the NDE engineering and NDE process control, along with some case studies related to the applications of NDE. The article reviews various models for predicting NDE reliability, such as ultrasonic inspection model, eddy current inspection model, and radiographic inspection model. It concludes with an example that illustrates the integration of an ultrasonic reliability model with a CAD system.

Probability of detection (POD) assesses the performance of a non-destructive evaluation (NDE)-based inspection, which is a method used to determine the capability of an inspection as a function of defect type and defect size. This article provides an overview of the concept of POD, why it is needed, the history behind the development of POD, how POD assessments are performed, and how modeling and simulation can be integrated into the execution of a POD assessment. It describes the methods by which POD is determined. This includes detail on the experimental process to acquire the needed data, the mathematical methods to obtain a POD curve, and techniques to assess uncertainty in the POD curve as it is obtained from a limited data set. The concept of model-assisted POD (MAPOD) is introduced, with additional details and representative examples of MAPOD.

This article presents the structural attributes and internal characteristics of spot welds as well as the commonly inspected imperfections in resistance welds. It describes the industrial requirements for weld quality. Commonly performed destructive evaluations, namely, manual testing, quasi-static mechanical tests, dynamic mechanical tests, and metallographic examination, are reviewed. The article reviews weld-quality monitoring using various process signals and provides a discussion on the on-line and off-line nondestructive evaluation methods of spot weld quality.

Failure analysis is generally defined as the investigation and analysis of parts or structures that have failed or appeared to have failed to perform their intended duty. Methods of field inspection and initial examination are also critical factors for both reconstruction analysts and materials failure analysts. This article focuses on the general methods and approaches from the perspective of a reconstruction analyst. It describes the elements of accident reconstruction, which have conceptual similarity with the principles for failure analysis of material incidents that are less complex than a large-scale accident. The approach presented is that the analysis and reconstruction is based on the physical evidence. The article provides a brief review of some general concepts on the use and limitations of advanced data acquisition tools and computer modeling. Legal implications of destructive testing are discussed in detail.

The goal of using nondestructive evaluation (NDE) in conjunction with failure analysis is to obtain the most comprehensive set of data in order to characterize the details of the damage and determine the factors that allowed the damage to occur. The NDE results can be used to determine optimal areas upon which to focus for sectioning and metallography in order to further investigate the condition of the component. This article provides information on the inspection method available for failure analysis, including standard methods such as visual testing, penetrant testing, and magnetic particle testing. It covers the effects of various factors on the properties of the part that may impact failure analysis, describes the characterization of damage modes and crack sizes, and finally discusses the processes involved in application of NDE results to failure analysis.

This article is a brief guide to information sources on nondestructive testing (NDT). It provides examples of some of the standards bodies commonly used by NDT personnel. These include the American Society for Testing and Materials (ASTM) International, European Committee for Standardization (CEN), American Society of Mechanical Engineers (ASME), International Organization for Standardization (ISO), Aerospace Industries Association (AIA), American Welding Society (AWS), American Petroleum Institute (API), and American Society for Nondestructive Testing (ASNT). All of these organizations used industry subject-matter experts and a consensus process in the development of their codes and standards.

Acoustic emission is the generation of stress waves by sudden movement in stressed materials. This article begins with a comparison of acoustic emission from most other nondestructive testing (NDT) methods, and discusses the range of applicability of acoustic emission. It describes the instrumentation principles of acoustic emission and reviews the role of acoustic emission in materials studies. The article illustrates the testing of metal-matrix composites (MMCs) using acoustic emission and the use of acoustic emission inspection in production quality control. It concludes with information on the structural test applications of acoustic emission inspection to find defects and to assess or ensure structural integrity.

This article focuses on the general methods and approaches from the perspective of a reconstruction analyst and includes discussions relevant to materials failure analysts at the incident scene. The elements of accident reconstruction are described. These have conceptual similarity with the principles for failure analysis of material incidents that are less complex than a large-scale accident. The article provides a brief review of some general concepts on the use of modeling which can be a very powerful tool for information pertaining to the reconstruction of an accident where the model can be a physical, mathematical, or logical representation of a physical system or process.

Adhesive-bonded joints are extensively used in aircraft components and assemblies where structural integrity is critical. This article addresses the problem of how to inspect bonded assemblies so that all discrepancies are identified. It describes several inspection techniques and presents drawbacks and limitations of these techniques. Generic flaw types and flaw-producing mechanisms are listed in a table. The article discusses metal-to-metal defects, adherend defects, honeycomb sandwich defects, repair defects, and in-service defects. It reviews the methods applicable to the inspection of bonded structures, including visual inspection, ultrasonic inspection, X-ray radiography, and neutron radiography. The evaluation and correlation of inspection results are also discussed. The article concludes with information on the effects of ultrasonic wave interference in the ultrasonic inspection of adhesive-bonded joints.

This article covers defect formation and classification, followed by a brief description of the most common nondestructive testing (NDT) methods used for postbuild inspection. Descriptions of the established and emerging NDT techniques for in-process monitoring (IPM) and in-process inspection (IPI) in additive manufacturing (AM) also are provided, highlighting the advantages and limitations. The article concludes with a list of the main NDT methods and techniques used. As qualification and certification of AM parts is an urgent matter for the AM industry, a description of the current work carried out for developing standards is also included.

This article focuses on ultrasonic testing (UT) applied to metallic additive manufacturing (AM) parts, presenting the basic principles of UT. It provides a detailed discussion on postprocess UT inspection of powder-bed-fusion-manufactured samples and directed-energy-deposition-manufactured samples.