Search Results for cutting equipment

Thermal spray coatings, along with certain proprietary sealants, are widely used in the paper manufacturing industry for corrosion and wear resistance and to impart special surface characteristics. This article discusses the steps involved in the paper manufacturing process. Most modern papermaking machines are based on variations of the Fourdrinier machine. The article describes four operational sections of the machine: forming, press, drying, and calendar. It provides an overview of the machine components where thermal spray coatings are used, namely, digesters, blow tanks, suction roll, center press rolls, yankee dryer rolls, calendar rolls, doctor/scalping blades, and cutting equipment.

This article discusses the operating principles, types, and applications of shearing and slitting of different forms of steel, including plates, flat sheets, bars, coiled sheet and strips. In addition, it provides a detailed account of the cutting methods such as oxyfuel gas cutting, plasma arc cutting, oxygen arc cutting, laser beam cutting, and air carbon arc cutting and gouging, describing their process capabilities, equipment used, operating principles and parameters, and factors affecting their efficiency.

Oxyfuel gas cutting (OFC) includes a group of cutting processes that use controlled chemical reactions to remove preheated metal by rapid oxidation in a stream of pure oxygen. This article provides a detailed discussion on the principles of operation and the process capabilities of OFC. In addition to providing information on the equipment used, the article describes the properties of fuel gases (acetylene, natural gas). It also presents an overview of the effect of OFC on base metal and explains the application of OFC in cutting thin, medium, and thick sections, bars, and structural and close-tolerance shapes.

Electric arc cutting is used on ferrous and nonferrous metals for rough severing, such as removing risers or scrap cutting, as well as for more closely controlled operations. This article describes the operating principles, equipment selection, process variables, and safety measures recommended for plasma arc cutting and air carbon arc cutting. Special applications of electric arc cutting, including shape cutting, gouging, and underwater cutting, are also discussed. The article provides information on other electric arc cutting methods, namely, the exo-process and oxygen arc cutting. It concludes with information on the seldom-used electric arc cutting methods, such as shielded metal arc cutting, gas metal arc cutting, and gas tungsten arc cutting.

Plasma arc cutting (PAC) is an erosion process that utilizes a constricted arc in the form of a high-velocity jet of ionized gas to melt and sever metal in a narrow, localized area. This article discusses the process description, equipment, gases, operating sequence, process considerations, and applications of PAC. It concludes with a discussion on the safety measures associated with the PAC process.

This article describes the principles of operation, operating techniques, equipment selection, and important process variables of air-carbon arc cutting. It also provides information on the safety practices to be followed during the air-carbon arc cutting process.

Turning is a machining process for generating external surfaces of revolution by the action of a cutting tool on a rotating workpiece, usually in a lathe. This article discusses the process capabilities of turning over other machining operations and describes the classification, controlling methods, attachments, and accessories of a lathe machine. It reviews the design and various operations of single-point cutting tools in turning. In addition, the article discusses the influence of various factors on selection of equipment and machining procedure for a specific part. These include the size and configuration of the workpiece, equipment capacity, production quantity, dimensional accuracy, number of operations, and the surface finish. It presents examples that describe or compare equipment and techniques for production applications. Finally, the article provides a discussion on the classification and compatibility of cutting fluids.

This article focuses on the mechanical and nonmechanical cutting methods used in metal fabrication industries. The most prevalent equipment used for mechanical cutting includes shears, iron workers, nibblers, and band saws. Nonmechanical methods of cutting include gas cutting, electric arc cutting, and laser cutting. The article concludes with information on the advantages of abrasive waterjet cutting, which is an alternative to laser cutting, gas cutting, and plasma cutting.

Mechanical cutting methods are widely used by the metal fabrication industry. This article introduces the welding fabricator to some of the mechanical equipment used to shape or prepare metals for welding. The most prevalent equipment used for mechanical cutting includes shears, iron workers, nibblers, and band saws. The article provides details on each of these.

Boring is a machining process in which internal diameters are generated in true relation to the centerline of the spindle by means of single-point cutting tools. This article provides a discussion on boring machines and boring tools and presents a comprehensive discussion on the various elements of boring. The elements are composition and hardness of workpiece metal, cutting fluid, speeds and feeds, and methods for piloting and supporting tools in boring applications. The article explains the role of workpiece size in selecting the equipment and processing procedure and the use of techniques to overcome difficulties presented by workpiece configuration. It describes the factors related to accuracy of boring and factors affecting them. The article also presents a discussion on close-tolerance boring and methods of controlling vibration and chatter. It concludes with a section presenting information on the use of boring equipment for machining operations other than boring.

Cutting with lasers is accomplished with carbon dioxide (CO 2 ) and neodymium: yttrium-aluminum-garnet (Nd:YAG) lasers. This article provides a description of the process variables and principles of laser cutting. It discusses the three basic types of CO 2 gas lasers, namely, slow axial flow, transverse flow, and fast axial flow and reviews the applications of Nd:YAG laser. The article describes the basic parameters in the laser-cutting process: beam quality, power, travel speed, nozzles design, and focal-point position. Several material conditions that affect the quality of the laser cut are also discussed. The article provides information on the basic laser-cutting system and its optional equipment. A general description of how well each metal group can be cut is also provided.

This article presents an overview of the rules, regulations, and techniques implemented to minimize the safety hazards associated with welding, cutting, and allied processes. Safety management, protection of the work area, process-specific safety considerations, and robotic and electrical safety are discussed. The article explains the use of personal protective equipment and provides information on protection against fumes, gases, and electromagnetic radiation. It concludes with a discussion on safe handling of compressed gases as well as the prevention and protection of fire and explosion.

Good hole-drilling processes are key to joining composite parts with other composite parts or with metal parts. This article discusses the considerations for drilling polymer-matrix composites. It describes the use of power-feed drill motors and automated drilling/fastener installation equipment. The article provides a discussion on reaming, countersinking, and three recommended choices of cutting tools for producing a countersink in carbon/epoxy structure. The cutting tools include: standard carbide insert cutters, solid carbide cutters, or polycrystalline diamond (PCD) insert cutters. The article concludes with a discussion on inspection of hole quality.

Shearing is a method for cutting a material piece into smaller pieces using a shear knife to force the material past an opposition shear knife in a progression form. This article describes the principles, attributes, and defects of straight-knife shearing. The equipment, materials used, and the operating parameters are discussed. The article provides information on the applications of rotary shearing. It concludes with a discussion on devices equipped with shearing machines for protecting personnel from the hazards of shear knives, flywheels, gears, and other moving parts.

Contour roll forming is a continuous process for forming metal from sheet, strip, or coiled stock into desired shapes of uniform cross section by feeding the stock through a series of roll stations equipped with contoured rolls. This article discusses the materials, roll-forming machines, tooling, and auxiliary equipment used in contour roll forming and its process variables. Tooling used in roll forming includes forming rolls and dies for punching and cutting off the material. The article discusses the additional tooling required in tube mills to weld, size, and straighten the tubes as they are produced on the machine. It describes the roll design for tube rolling and reviews the seam welding operations of pipe and tubing. The article discusses cross-sectional tolerances, the reshaping of round tubing, and factors that affect the quality, accuracy, and surface finish.

This article describes processes and equipment that are used to produce composite tubular parts. The processes include sheeting, pattern cutting, tube rolling, shrink tape debulking, and finishing. The article provides a discussion on materials that are most suitable for tube rolling: preimpregnated materials and unidirectional tapes. The article also discusses wrapping techniques of cylindrical and tapered tubes, such as convolute and spiral wrapping.

This article provides information on the operating principle, tool material and design changes, and safety and protection of various multifunction machines as well as the cutting fluids used. These include single-spindle automatic lathes, manual turret lathes, single-spindle automatic bar and chucking machines, Swiss-type automatic bar machines, multiple-spindle automatic bar and chucking machines, and multiple-spindle vertical chucking machines. The article provides examples that illustrate typical variations in dimensions obtained with a multiple-spindle machine. It also describes the machinability and provides information on the physical condition of the work metal. The article discusses the various factors to be considered in the selection of an appropriate machine. It presents examples that describe the techniques and equipment selected for specific production applications. In addition, the article discusses the types, applications, advantages, and disadvantages of machining centers and transfer machines. Finally, it provides the goals, objectives, and production techniques of flexible manufacturing systems.

Structural applications for advanced ceramics include mineral processing equipment, machine tools, wear components, heat exchangers, automotive products, aerospace components, and medical products. This article begins with an overview of the wear-resistant applications and the parameters affecting wear of ceramics, namely, hardness, thermal conductivity, fracture toughness, and corrosion resistance. The next part of the article addresses temperature-resistant applications of advanced ceramics. Specific applications of ceramic materials addressed include cutting tools, pump and valve components, rolling elements and bearings, paper and wire manufacturing, biomedical implants, heat exchangers, adiabatic diesel engines, advanced gas turbines, and aerospace applications.

Oxyfuel gas cutting (OFC) includes a group of cutting processes that use controlled chemical reactions to remove preheated metal by rapid oxidation in a stream of pure oxygen. This article discusses the operation principles and process capabilities of the OFC. It reviews the properties and compositions of fuel types such as acetylene, natural gas, propane, propylene, and methyl-acetylene-propadiene-stabilized gas. The article describes the effects of OFC on base metal, including carbon and low-alloy steels, cast irons, and stainless steels. It provides information on light cutting, medium cutting, heavy cutting, and stack cutting. The article informs that the basic oxyfuel method can be modified to allow gas cutting of metals, such as stainless steel and most nonferrous alloys, that resist continuous oxidation.