Search Results for corrosion-resistant casting alloys

This article discusses two categories of stainless steel casting alloys and their nomenclature. It provides information on two situations in which welding of stainless steel castings is required. These situations are based on casting defects and selection of welding processes. The article presents compositions and typical microstructures of corrosion-resistant stainless steel casting alloys in tabular form. It presents special considerations for the welding of martensitic stainless steel castings. The article reviews the two most serious problems encountered in the welding of stainless steel castings, namely, solidification hot cracking and heat-affected zone hot cracking. It concludes with a discussion on the some useful considerations for welding corrosion-resistant alloys to avoid defects.

Cast stainless steels are usually specified on the basis of composition by using the alloy designation system established by the Alloy Casting Institute. This article discusses the corrosion behavior of heat-resistant alloys due to oxidation, sulfidation, and carburization. It describes the influence of the metallurgy of corrosion-resistant stainless steels on general corrosion, intergranular corrosion, localized corrosion, corrosion fatigue, and stress corrosion.

Cast irons provide excellent resistance to a wide range of corrosion environments when properly matched with that service environment. This article presents basic parameters to be considered before selecting cast irons for corrosion services. Alloying elements can play a dominant role in the susceptibility of cast irons to corrosion attack. The article discusses the various alloying elements, such as silicon, nickel, chromium, copper, and molybdenum, that enhance the corrosion resistance of cast irons. Cast irons exhibit the same general forms of corrosion as other metals and alloys. The article reviews the various forms of corrosions, such as graphitic corrosion, fretting corrosion, pitting and crevice corrosion, intergranular attack, erosion-corrosion, microbiologically induced corrosion, and stress-corrosion cracking. It discusses the four general categories of coatings used on cast irons to enhance corrosion resistance: metallic, organic, conversion, and enamel coatings.

This article discusses the five basic matrix structures in cast irons: ferrite, pearlite, bainite, martensite, and austenite. The alloying elements, used to enhance the corrosion resistance of cast irons, including silicon, nickel, chromium, copper, molybdenum, vanadium, and titanium, are reviewed. The article provides information on classes of the cast irons based on corrosion resistance. It describes the various forms of corrosion in cast irons, including graphitic corrosion, fretting corrosion, pitting and crevice corrosion, intergranular attack, erosion-corrosion, microbiologically induced corrosion, and stress-corrosion cracking. The cast irons suitable for the common corrosive environments are also discussed. The article reviews the coatings used on cast irons to enhance corrosion resistance, such as metallic, organic, conversion, and enamel coatings. It explains the basic parameters to be considered before selecting the cast irons for corrosion services.

This article, primarily focusing on atmospheric corrosion of carbon and low-alloy steels, describes the factors that must be considered by alloy casting users in material selection. It presents compositions of cast steels tested in atmospheric corrosion in a tabular form. The article graphically presents the results of a research program that compared the corrosion resistance of nine cast steels in marine and industrial atmospheres. It provides a comparison of corrosion rates of cast steels, malleable cast iron, and wrought steel after three years of exposure in two atmospheres. Conclusions drawn from these tests are also presented.

This article reviews the properties of cast steels that are specified for liquid corrosion service at temperatures above and below 650 deg C. Stainless steel castings are usually classified based on their resistance to corrosion and heat and generally fall into one category or the other. The article describes alternate methods for classifying cast stainless steels, one is based on grade designations, the other on microstructural analysis. It also addresses heat treatment, pointing out its similarities with the thermal processing of wrought materials, and establishes the importance of mechanical properties in material selection. The article presents information on the selection process and provides a detailed list of heat-resistant cast steels and alloys. It also includes key manufacturing characteristics to aid in foundry and welding-related decisions.

Cast stainless steels are widely used for their corrosion resistance in aqueous media at or near room temperature and for service in hot gases and liquids at elevated temperatures. This article provides a comparison between cast and wrought stainless steels in terms of composition, microstructure and properties. It discusses the grade designations and compositions of cast stainless steels. The article describes the mechanical properties, applications, and corrosion characteristics of corrosion-resistant steel castings and heat-resistant steel castings.

High-alloy graphitic cast irons are used primarily in applications requiring corrosion resistance or strength and oxidation resistance in high-temperature service. This article describes the properties, applications and heat treatment processes of high-alloy graphitic cast irons, including austenitic gray irons and austenitic ductile irons. It also provides a discussion on the heat treatment of high-silicon irons for heat resisting and corrosion resisting applications.

This article describes the selection of materials for the production and handling equipment of concentrated sulfuric acid, depending on factors such as the allowable corrosion rate, desired mechanical and physical properties, fabrication requirements, availability, and cost. Materials such as carbon steel, cast irons, austenitic stainless steels, higher austenitic stainless steels, higher chromium Fe-Ni-Mo alloys, nickel-base alloys, non-metals, and specific other metals and alloys are also discussed.

The 443 series of aluminum casting alloys have nominal silicon content of 5 wt% with various limits on iron, copper, manganese and magnesium. They are hypoeutectic AI-Si binary alloys with high ductility, very good corrosion resistance, good machinability, but only fair castability, and low strength. The alloys are used in castings where above average ductility coupled with excellent corrosion resistance is needed. This datasheet provides information on key alloy metallurgy, fabrication characteristics, processing effects on physical and mechanical properties, and application characteristics of these alloys.

Alloy cast irons are casting alloys based on the Fe-C-Si system that contain one or more alloying elements added to enhance one or more useful properties. This article discusses the composition of different types of alloy cast iron, including white cast irons, corrosion-resistant cast irons, heat-resistant cast irons, and abrasion-resistant cast irons. It provides information on the effect of the alloying element on their high-temperature properties. The article also discusses the microstructure and mechanical properties of alloy cast irons.

Nickel-base alloy castings are widely used in corrosive-media and high-temperature applications. This article begins with a discussion on the compositions of corrosion-resistant nickel-base casting alloys and heat-resistant nickel-base casting alloys. It describes the effects of aluminum and titanium on the structure and properties of nickel-base alloys. The article provides information on the melting, foundry, and pouring practices for nickel-base alloys. It explains the welding and heat treatment of the nickel-base casting alloys. The article concludes with an overview of the numerous applications of cast heat-resistant nickel-base alloys.

This article discusses the physical metallurgy of cast cobalt alloys with an emphasis on the crystallography, compositions, phases and microstructure, and properties. Cobalt alloys are cast by several different foundry methods. The article describes the argon-oxygen decarburization and continuous casting process. It provides information on castability and quality of the casted alloys. The article details the postcasting treatment, including heat treatment, hot isostatic pressing, and coatings. It summarizes the applications of cast cobalt alloys.

This datasheet provides information on key alloy metallurgy, foundry characteristics, processing effects on physical and mechanical properties, and applications of moderate-strength corrosion-resistant alloys 514.0 and 515.0.

This article discusses factors that influence the effect of alloying, metallurgical treatments, and mechanical treatments on the corrosion resistance of metallic materials, with schematic illustrations.

This article discusses the mechanical properties of carbon steels, low-alloy steels, wear-resistant steels, corrosion-resistant steels, heat-resistant steels, and common alloys at both room and elevated temperature. It also provides information on the corrosion-resistant and heat-resistant applications of the common alloys.

This datasheet provides information on key alloy metallurgy, fabrication characteristics, processing effects on physical and mechanical properties, and applications of Al-Mg high-strength casting alloy 535.0.

The high-alloy irons can be categorized into two main groups: the high-alloy graphitic irons (covering both gray and ductile grades) and the high-alloy white irons. High-alloy irons are used in applications with demanding requirements, such as high resistance to wear, heat, and corrosion, or for combined properties. This article discusses the specification and selection of high-alloy irons. The common alloying elements and their effect on the stable and metastable eutectic temperatures are listed in a table. The article provides information on the compositions, properties and applications of high-alloy graphitic irons and high-alloy white irons.

The article provides an introduction on the importance of alloying elements on corrosion behavior of nickel alloys and describes the applications of heat-resistant alloys to resist corrosion. It focuses on the metallurgical effects, mainly the effect of internal factors, including chemical composition and microstructure of the alloy, and the external factors, including electrolyte composition, temperature, and electrode potential, on the corrosion behavior of corrosion-resistant alloys. The article also discusses the implication of changing the alloy microstructure by second-phase precipitation, cold working, and cast and wrought forms on the corrosion behavior of high-nickel alloys.