This article describes the Schottky defect and the Frenkel defect in oxides. It provides information on the p-type metal-deficit oxides and n-type semiconductor oxides. The article discusses diffusion mechanisms and laws of diffusion proposed by Fick. It explains the oxide texture of amorphous and epitaxy oxide layers and presents equations for various oxidation reaction rates. The article reviews different theories to describe the oxidation mechanism. These include the Cabrera-Mott, Hauffe-IIschner, Grimley-Trapnell, Uhlig, and Wagner theories.

This article provides a general introduction to the kinetics of aqueous corrosion with an emphasis on electrochemical principles. It describes the thermodynamic basis for corrosion by determining the equilibrium potentials of electrochemical reactions from the Nernst equation. A corrosion process can be controlled by the electronic conductivity of passive films when the cathodic reaction occurs on the surface of the film and by activation control of corrosion. Passivation becomes thermodynamically possible when the corrosion potential exceeds the potential corresponding to the equilibrium between a metal and one of its oxides/hydroxides. The article schematically illustrates a current-potential or polarization curve for an anodic process.

This article provides a summary of the concepts discussed in the articles under the Section “Fundamentals of Corrosion” in ASM Handbook, Volume 13A: Corrosion: Fundamentals, Testing, and Protection. In this section, the thermodynamic aspects of corrosion are descried first followed by a group of articles discussing the fundamentals of aqueous corrosion kinetics. The fundamentals of gaseous corrosion are addressed next. The fundamental electrochemical reactions of corrosion and their uses are finally described.

This article provides an introduction on the metal side of the corrosion reaction and describes a wide range of metallurgical factors that influence corrosion.

Simulated service testing is the most reliable predictor of corrosion behavior that is important for specific objectives. These include materials selection, predicting the probable service life of a product or structure, evaluating new commercial alloys and processes, and calibrating laboratory corrosion tests in short of in-plant tests and actual service experience. This article provides a detailed discussion on the types of atmospheres used in simulated service testing. It describes the specifics of atmospheric-corrosion test that include equipment, test arrangement, and test specimen; factors affecting atmospheric corrosion; and evaluation of exposed atmospheric-corrosion panels. The article concludes with a discussion on the empirical model used for analyzing the atmospheric-corrosion measurements for estimating the service life of the part being evaluated.

Principles of metallic corrosion play a fundamental role in developing industrial processes that employ corrosion for constructive purposes. This article examines the changes in kinetics that occur with differentially small potential changes around the equilibrium electrode potentials of two reversible electrodes, such as copper and silver electrodes, in an electrochemical system. It provides a schematic illustration of a reversible cell with copper and silver electrodes to determine a reversible cell potential between the electrodes. An electrode becomes irreversible when the electrode reactions are displaced from equilibrium and the electrode potential is no longer at the equilibrium potential. The article describes irreversible cell potential by using galvanic cells, electrolytic cells, and corrosion cells.

The components used in light water reactors (LWR) often remain in contact with the primary coolant, whose typical temperatures and pressures are highly aggressive, therefore, initiating corrosion in most of the alloys. This article describes the corrosion behavior of zirconium alloys in water and heat flow conditions that causes irradiation on the zirconium alloy assemblies. It discusses the effect of irradiation on the microstructure and morphology of cladded linings. The article describes the impact of metallurgical parameters on the oxidation resistance of zirconium alloys. It concludes with a discussion on LWR coolant chemistry and corrosion of fuel rods in reactors.

This article provides a discussion on the fundamentals of corrosion thermodynamics. The discussion focuses on electrochemical reactions, molten salt corrosion thermodynamics, and geochemical modeling.

This article presents common conventions and definitions in corrosion, electrochemical cells, cathodic protection (CP), electricity, and oxidation. Evans diagrams for impressed current CP in neutral or basic environment and galvanic or sacrificial CP, in both neutral or basic environment and acidic environment, are illustrated.