Search Results for cooling-rate curve

Fig. 4 Cooling curve and cooling-rate curve of 5 mm (0.2 in.) steel wire during patenting in (a) 0.10% carboxymethyl cellulose (CMC) and (b) 0.25% CMC. Note the different time scales, because cooling was substantially slower in the higher-concentration CMC solution shown in Fig. 4(b) . More

Fig. 7 Typical cooling curve and cooling-rate curve measured by a 5 mm (0.2 in.) steel wire probe in fog cooling More

Fig. 3 Cooling curve and cooling rate curve at the center of a 25 mm (1.0 in.) diam probe quenched with 95 °C (200 °F) water flowing at 15 m/min (50 ft/min) More

Fig. 3 Cooling curve and cooling-rate curve of 5.0 mm (0.2 in.) steel wire during patenting into a molten lead bath at 505 °C (940 °F) More

Fig. 83 Cooling curve and cooling-rate curve of 5 mm (0.2 in.) diameter steel wire during patenting into a molten lead bath at 505 °C (940 °F). Source: Ref 234 More

Fig. 58 Cooling curve and cooling-rate curve of 5.0 mm (0.2 in.) steel wire during patenting into a molten lead bath at 505 °C (940 °F) More

Fig. 135 Effect of agitation on the cooling time-temperature curve and cooling-rate curve performance for a polymer quenchant More

Fig. 100 Complete cooling curves and cooling-rate curves for fog cooling with 1: tap water; 2: 0.05% polyvinyl alcohol; 3: 0.05% carboxymethylcellulose More

Fig. 3 Resultant cooling curves and cooling rate curves of a medium-viscous mineral oil for the temperatures 50, 75, and 100 °C (120, 170, and 210 °F), without agitation. Courtesy of the Quenching Research Center, Faculty of Mechanical Engineering and Naval Architecture, Zagreb More

Fig. 9 Complete cooling curves (left) and cooling-rate curves (right) of fog cooling with different polymers. 1 = tap water; 2 = 0.05% polyvinyl alcohol; 3 = 0.05% carboxymethyl cellulose More

Fig. 9 Cooling curves and cooling rate curves for a 25 mm (1 in.) diameter stainless steel probe quenched in 55°C (130 °F) water that is flowing at selected velocities from 0 to 0.75 m/s (0 to 150 ft/m in) More

Fig. 16 Cooling curves and cooling rate curves for a 25 mm (1 in.) diameter stainless steel probe quenched in 55 °C (130 °F) water that is flowing at selected velocities from 0 to 0.75 m/s (0 to 150 ft/min) More

Fig. 4 Cooling curves and cooling rate curves for a 25 mm (1 in.) diameter stainless steel probe quenched in 55 °C (130 °F) water that is flowing at selected velocities from 0 to 0.75 m/s (0 to 150 ft/min). Source: Ref 4 More

Fig. 93 Cooling curves and cooling-rate curves of ~5 mm (0.2 in.) steel wire during patenting in (a) 0.10% and (b) 0.25% carboxymethylcellulose (CMC). Note the different time scales, because cooling was substantially slower in the higher-concentration CMC solution shown in (b). More

Fig. 97 Typical cooling curves and cooling-rate curves measured by a 5 mm (0.2 in.) steel wire probe during fog cooling More

Fig. 5 Cooling curves and cooling rate curves of copper nanofluid and deionized water. Source: Ref 34 More

Fig. 7 Cooling curves and cooling rate curves obtained at the geometric center of an Inconel 600 probe for CuO nanofluids of varying concentration. Source: Ref 22 More

Fig. 13 Cooling curves and cooling rate curves for (a) AlN nanofluids and (b) TiO 2 nanofluids. Source: Ref 39 More

Fig. 16 Cooling curves and cooling rate curves of ferrofluids at a bath temperature of 40 °C (105 °F). (a) Without magnetic field; (b) with 500G magnetic field. Source: Ref 42 More

Fig. 20 Cooling curves and cooling rate curves for (a) graphene and (b) MWCNT nanofluids. Source: Ref 30 , Ref 45 More