Search Results for composite off-axis properties

Fiber-matrix adhesion is a variable to be optimized in order to get the best properties and performance in composite materials. This article schematically illustrates fiber matrix interphase for composite materials. It discusses thermodynamics of interphase in terms of surface energy, contact angle, work of adhesion, solid surface energy, and wetting and wicking. The article describes the change in interphase depending on the reinforcing fiber such as glass fiber, polymeric fiber, and carbon fiber. It emphasizes fiber-matrix adhesion measurements by direct methods, indirect methods, and composite laminate tests. The effects of interphase and fiber-matrix adhesion on composite mechanical properties, such as composite on-axis properties, composite off-axis properties, and composite fracture properties, are also discussed.

This article begins with a discussion on fiber-reinforced composite materials and describes the generic behavior and structure/property relationships of composites. The article summarizes lamina properties and presents equations that help in the calculation of lamina properties. Composite laminates are constructed from lamina with uniaxial fiber orientation and frequently from textile fabrics as well. The article explains the characteristics of symmetric in-plane and through-thickness laminates; asymmetric in-plane and symmetric through-thickness laminates; asymmetric laminates; and curved laminates. It provides information on controlled thermal expansion composites, metal-matrix composites, and ceramic-matrix composites. The article illustrates the types of bonded joints and concludes with a discussion on design for manufacturing.

Testing of fiber-reinforced composite materials is performed to determine uniaxial tensile strength, Young's modulus, and Poisson's ratio relative to principal material directions, that helps in the prediction of the properties of laminates. Beginning with an overview of the fundamentals of tensile testing of fiber-reinforced composites, this article describes environmental exposures that often occur during specimen preparation and testing. These include exposures during specimen preparation, and planned exposure such as moisture, damage (impact), and thermal cycling techniques. The article also discusses the test procedures, recommended configurations, test specimen considerations, and safety requirements considered in the four major types of mechanical testing of polymer-matrix composites: tensile test, compression test, flexural test, and shear test.

This article provides an overview of the finite-element-based analyses (FEA) of advanced composite structures and highlights key aspects such as the homogenization of materials properties and post-processing of numerical results. It discusses the analysis of composite structures based on micromechanics and macromechanics. The article describes the FEA of 3-D solid elements, 2-D cylindrical shell elements, and 1-D beam elements. It contains a table that lists the commercially available finite element codes related to the analysis of fibrous composite materials. The article presents classical examples of the mechanics of composite materials to illustrate the aspects of multilayered composite structures.

For the reinforcement of metal-matrix composites, four general classes of materials are commercially available: oxide fibers based primarily on alumina and alumina silica systems, nonoxide systems based on silicon carbide, boron fibers, and carbon fibers. This article discusses the key aspects of aluminum oxide fibers, silicon carbide fibers, boron fibers, and carbon fibers. The commercial fibers for reinforcement of metal-matrix composites are presented in a table. A tabulation of the coating schemes for silicon carbide monofilament fibers is also provided.

Damping is the energy dissipation properties of a material or system under cyclic stress. The vibrational and damping characteristics of composites are important in many applications, including ground-based and airborne vehicles, space structures, and sporting goods. This article describes the damping characteristics of unidirectional composites, when they are subjected to longitudinal shear, longitudinal tension/compression, and transverse tension/compression. It presents equations that govern the overall damping capacity of beams that are cut from laminated plates. The article discusses the effect of temperature on damping and provides information on the relationship between damping and strength.

This article begins with a review of the purposes of mechanical characterization tests and the general considerations related to the mechanical properties of anisotropic systems, specimen fabrication, equipment and fixturing, environmental conditioning, and analysis of test results. It provides information on the specimen preparation, instrumentation, and procedures for various mechanical test methods of fiber-reinforced composites. These include the compression test, flexure test, shear test, open hole tension test, and compression after impact test. The article describes three distinct fracture modes, namely, crack opening mode, shearing mode, and tearing mode. It presents an overview of fatigue testing and fatigue damage mechanisms of composite materials and reviews the types of mechanical measurements that can be made during the course of testing to assess fatigue damage. The article concludes with a discussion on the split-Hopkinson pressure bar test.

This article describes the microcrack analysis of composite materials using bright-field illumination, polarized light, dyes, dark-field illumination, and epi-fluorescence.

The term isomorphous refers to metals that are completely miscible in each other in both the liquid and solid states. This article discusses the construction of simple phase diagrams by using the appropriate points obtained from time-temperature cooling curves. It describes the two methods to determine a phase diagram with equilibrated alloys: the static method and the dynamic method. The article illustrates the construction of phase boundaries according to the Gibbs' phase rule and describes the calculation methods that allow the prediction of the phases present, the chemical compositions of the phases present, and the amounts of phases present. Phase diagrams provide useful information for understanding alloy solidification. The article provides two simple models that can describe the limiting cases of solidification behavior.

This article begins with a discussion on the criteria for evaluating computer programs for composites structural analysis, including database capabilities, types of engineering calculations supported, interface and operating systems, and technical support. It describes the capabilities of programs, such as CompositePro, ESAComp, and V-Lab that provide a graphical interface, built-in databases, and integrated modules for the different types of analyses. The article reviews the modules of other programs used for composite analysis. The programs include ASCA, CADEC, CoDA, COMPASS, ESDU, LAP, PROMAL, and SACL. The article concludes with information on on-line programs and recourses.

Filament winding is a process for fabricating a composite structure in which continuous reinforcements, either previously impregnated with a matrix material or impregnated during winding, is placed over a rotating form or mandrel in a prescribed way to meet certain stress conditions. This article describes the advancements in filament winding and lists the advantages and disadvantages of filament winding. It discusses the effects of fiber tension in filament winding and the selection of fibers, resins, and materials for filament winding. The article emphasizes the three basic filament-winding patterns, such as helical, polar, and hoop. It presents information on the applications of filament winding, including rocket motors, natural gas vehicle (NGV) tanks, and sporting goods. The article presents recommendations for the basic design guidelines for filament-winding design/manufacturing process and concludes with a discussion on fabrication recommendations.

Pultrusion is an automated process for manufacturing composite materials into continuous, constant cross-sectional profiles. The article provides an overview of the pultrusion process and the wide range of materials that can be used to provide a broad spectrum of composite properties. It discusses the mechanical, physical and material properties of pultruded products, and the orientation options available to utilize the properties advantageously. The article also provides guidelines for designing pultruded products.

Pultrusion is a cost-effective automated process for manufacturing continuous, constant cross-section composite profiles. This article describes the process characteristics and advantages of pultrusion. It provides information on the applications of pultrusion and discusses the processing equipment and tooling, the material composition, and the process control essential for a basic understanding of the pultrusion process.

This article presents a comprehensive collection of the definition of terms related to metallurgy.

This article describes the applications, advantages, and disadvantages of three centrifugal casting processes as well as the equipment used. These processes are true centrifugal casting, semicentrifugal casting, and centrifuge mold casting. The article discusses the cooling, inoculation, fluxing, and extraction of castings. It reviews mold heating and coating techniques as well as the various molds used. The three most common defects observed in centrifugal castings are also discussed. The article concludes with information on the applications of centrifugal casting in investment casting and combustion synthesis as well as spin casting.

Filament winding is a process that allows the precise lay-down of continuous reinforcement in predescribed patterns at a high rate of speed. This article discusses the filament winding process and includes a comparison to other compacting and curing processes. The article describes design factors, and techniques to produce aerodynamic surfaces, improve surface smoothness, and avoid slipping and bridging of filament. The article discusses tooling and the equipment used in the filament winding process, namely, mandrel design, winding machines, tensioners, and ovens.

Composites are complex engineered materials that often behave differently than common isotropic materials. Before testing a composite material, or before ordering or supervising such testing, the responsible party should review certain considerations. This article provides an overview of such considerations, namely, the differences between the testing of composites and testing of isotropic materials, role of certification agencies and importance of their involvement, building-block approach to composites testing, determining the purpose of testing, normalizing results, and statistical data reduction.

Carbon-carbon composites (CCCs) are introduced in fields that require their high specific strength and stiffness, in combination with their thermoshock resistance, chemical resistance, and fracture toughness, especially at high temperatures. The use of CCCs has expanded as the price of carbon fibers has dropped and their mechanical properties have increased. This article begins with an overview of the carbon conversion processes, fiber properties and microstructures, and interfacial bonding and environmental interaction of carbon fibers, followed by a detailed discussion on the various techniques available for processing CCCs for specific applications, including preform fabrication (fiber weaving), densification, application of protective coatings, and joining. The article closes with a description of the mechanical and physical properties and applications of CCCs. The main applications of CCCs, in terms of money and mass, are in the military, space, and aircraft industries.

This article describes the types of fabrics and preforms used in the manufacture of advanced composites and related selection, design, manufacturing, and performance considerations. The types of fabrics and preforms include unidirectional and two-directional fabrics; multidirectionally reinforced fabrics; hybrid fabrics; woven fabric prepregs; unidirectional and multidirectional tape prepregs; and the prepreg tow. The article discusses three major categories of tape manufacturing processes, namely, the hand lay-up, machine-cut patterns that are laid up by hand, and the automatic machine lay-up. It provides a description of the two classes of prepregs. These include those that are suitable for high-performance applications and suitable for lower-performance molding compounds.

This article describes the manufacture, post-processing, fabrication, and properties of carbon-carbon composites (CCCs). Manufacturing techniques with respect to the processibility of different geometries of two-directional and multiaxial carbon fibers are listed in a table. The article discusses matrix precursor impregnants, liquid impregnation, and chemical vapor infiltration (CVI) for densification of CCCs. It presents various coating approaches for protecting CCCs, including pack cementation, chemical vapor deposition, and slurry coating. Practical limitations of coatings are also discussed. The article concludes with information on the mechanical properties of CCCs.