Search Results for committee

This article discusses the properties of threaded fasteners made from carbon and low-alloy steels containing a maximum of 0.55% carbon. It provides guidelines for the selection of steels for bolts, studs, and nuts intended for use at temperatures between -50 and 370 deg C. The article also discusses steels rated for service above 370 deg C and describes internationally recognized grade designations. The specifications provided can be used to outline fastener requirements, control manufacturing processes, and establish functional or performance standards. The most commonly used protective metal coatings for ferrous metal fasteners; zinc, cadmium, and aluminum; are described as well.

Cold-finished steel bars are carbon and alloy steel bar products (round, square, hexagonal, flat, or special shapes) that are produced by cold finishing previous hot-wrought bars. by means of cold drawing, cold forming, turning, grinding, or polishing (singly or in combination) to yield straight lengths or coils that are uniform throughout their length. Cold-finished bars fall into five classifications: cold-drawn bars; turned and polished bars; cold-drawn, ground, and polished bars; turned, ground, and polished bars; cold-drawn, turned, ground, and polished bars. Different size tolerances are applicable to cold-finished products, depending on shape, carbon content, and heat treatment. When used to identify cold-finished steel bars, the various quality descriptors are indicative of many characteristics, such as degree of internal soundness, relative uniformity of chemical composition, and relative freedom from detrimental surface imperfections. Cold drawing significantly increases machinability, tensile and yield strengths of steel bars. Two special die-drawing processes have been developed to give improved properties over those offered by standard drawing practices. These processes are cold drawing using heavier-than-normal drafts, followed by stress relieving; and drawing at elevated temperatures.

This article addresses classifications and designations for carbon and low-alloy steel sheet and strip product forms based on composition, quality descriptors, mechanical properties, and other factors. Carbon steel sheet and strip are available as hot-rolled and as cold-rolled products. Low-alloy steel sheet and strip are used primarily for applications that require the mechanical properties normally obtained by heat treatment. The descriptors of quality used for hot-rolled plain carbon steel sheet and strip and cold-rolled plain carbon steel sheet include structural quality, commercial quality, drawing quality, and drawing quality, special killed. The surface texture of low-carbon cold-rolled steel sheet and strip can be varied between rather wide limits. The modified low-carbon steel grades discussed in the article are designed to provide sheet and strip products having increased strength, formability, and/or corrosion resistance. The article also summarizes the key operations involved in the three alternative direct casting processes: thin slab, thin strip, and spray casting.

Porcelain enamels are glass coatings applied primarily to products or parts made of sheet steel, cast iron, and aluminum to improve appearance and to protect the metal surface. This article describes the types of porcelain enamels, and details enamel frits for these materials. It provides a list of steels suitable for porcelain enameling and discusses the most important factors considered in the selection of steel for porcelain enameling. The article briefly presents the preparation methods of these materials for porcelain enameling and covers the methods, and furnaces of porcelain enameling. It examines the role of coating thickness, firing time and temperature, metal substrate, and color on the performance of enameled surfaces. The article concludes with a discussion on the properties of enameled surfaces, factors considered in process control, and test procedures for evaluating the quality of enameled surfaces.

Mechanical cutting methods are widely used by the metal fabrication industry. This article introduces the welding fabricator to some of the mechanical equipment used to shape or prepare metals for welding. The most prevalent equipment used for mechanical cutting includes shears, iron workers, nibblers, and band saws. The article provides details on each of these.

This article presents a glossary of terms related to welding. The terms are arranged in the conventional dictionary letter-by-letter alphabetical sequence.

The selection of materials for welded construction applications involves a number of considerations, including design codes and specifications. Mobile structures have quite different materials requirements for weight, durability, and safety than stationary structures, which are built to last for many years. This article provides an overview of the service conditions. It offers guidance for material selection applications, including bridges and buildings, pressure vessels and piping, shipbuilding and offshore structures, aerospace systems, machinery and equipment, automobiles, railroad systems, and sheet metal. Material properties and welding processes that may be significant in meeting design goals are also described.

This article introduces the principal methodologies and some technologies that are being applied for nondestructive evaluation of composite materials. These include ultrasonic testing (UT), air-coupled UT, laser UT, ultrasonic spectroscopy, leaky lamb wave method, acousto-ultrasonics, radiography, X-ray computed tomography, thermography, low-frequency vibration methods, acoustic emission, eddy current testing, optical holography, and shearography. The article presents some examples are for fiber-reinforced polymer-matrix composites. Many of the techniques have general applicability to other types of composites such as metal-matrix composites and ceramic-matrix composites.

Life-cycle engineering is a part-, system-, or process-related tool for the investigation of environmental parameters based on technical and economic measures. This article focuses on life-cycle engineering as a method for evaluating impacts. It describes the four steps of life-cycle analysis, namely, goal definition and scoping, inventory analysis, impact assessment and interpretation, and improvement analysis. The article discusses the applications of life-cycle analysis results and presents a case history of life-cycle analysis of an automobile fender.

The organizations that are most active in the development of standards for powder metallurgy (PM) are the American Society for Testing and Materials (ASTM), Metal Powder Industries Federation (MPIF), and International Standards Organization (ISO). This article presents the test method standards, materials standards, and material designation codes for PM materials. It provides information on the codes for structural parts, PM soft magnetic materials, PM self-lubricating bearings, metal injection molded materials, and powder forged materials.

The International Committee of Foundry Technical Associations has identified seven basic categories of casting defects: metallic projections, cavities, discontinuities, defective surfaces, incomplete casting, incorrect dimension, and inclusions or structural anomalies. This article presents some of the common defects in each of the seven categories. It also discusses select case studies relevant to inclusions, cavities (gas porosity, shrinkage), and discontinuities (hot tearing, cold shut).

The International Committee of Foundry Technical Associations has identified seven basic categories of casting defects: metallic projections, cavities, discontinuities, defective surfaces, incomplete casting, incorrect dimension, and inclusions or structural anomalies. This article presents some of the common defects in each of the seven categories in a table. It discusses common defects determined during the examination of samples of ductile cast iron in Elkem's research facility in Norway. The article reviews common defects, such as shrinkage cavities, blowholes, hydrogen pinholes, nitrogen defects, and abnormal graphite morphology, found in gray iron. It concludes with a discussion on surface defects in compacted graphite iron.

Time-of-flight diffraction (TOFD) is an ultrasonic technique used to detect diffracted waves from crack tips and to size the cracks from the arrival times of those waves. This article discusses the basic considerations and provides information on probe selection, gain setting, and instrumentation of TOFD. It describes the numerous effects that result from modifying the probe characteristics. The article provides the American Society of Mechanical Engineers (ASME), the European Committee for Standardization (CEN), and the International Standardization Organization (ISO) recommendations for the reference blocks according to applicable codes and standards. It also provides the ASME, CEN, and ISO recommendations for examination of welds. The article concludes with information on the interpretation and analysis of TOFD images with an aid of sizing algorithms.

This article is a brief guide to information sources on nondestructive testing (NDT). It provides examples of some of the standards bodies commonly used by NDT personnel. These include the American Society for Testing and Materials (ASTM) International, European Committee for Standardization (CEN), American Society of Mechanical Engineers (ASME), International Organization for Standardization (ISO), Aerospace Industries Association (AIA), American Welding Society (AWS), American Petroleum Institute (API), and American Society for Nondestructive Testing (ASNT). All of these organizations used industry subject-matter experts and a consensus process in the development of their codes and standards.