Search Results for cleaning process selection

This article describes the basic attributes of the most widely used metal surface cleaning processes to remove pigmented drawing compounds, unpigmented oil and grease, chips, cutting fluids, polishing and buffing compounds, rust and scale from steel parts, and residues and lapping compounds from magnetic particle and fluorescent penetrant inspection. The cleaning processes include emulsion cleaning, electrolytic alkaline cleaning, acid cleaning, solvent cleaning, vapor degreasing, alkaline cleaning, ultrasonic cleaning, and glass bead cleaning. The article provides guidelines for choosing an appropriate process for particular applications and discusses eight well-known methods for determining the degree of cleanliness of the work surface.

This article focuses on the mineral and organic acid cleaning of iron and steel. It begins with a discussion on the application methods, process selection criteria, solution composition, equipment used, and control of process variables in mineral acid cleaning. The article then describes the advantages and disadvantages of organic acid cleaning. Applications, including boiler cleaning, stainless steel cleaning, and removal of iron- and copper-bearing deposits, are discussed. The article concludes with an overview of acid cleaning of nonferrous alloys.

Emulsion cleaning is an industrial cleaning process that uses an organic solvent as the main active agent. This article provides information on the applications, concerns and limitations, and process parameters of emulsion cleaning. It describes the processing variables and equipment for three main stages of emulsion cleaning: immersion cleaning, secondary cleaning, and spray cleaning. In addition, the classifications, composition, and selection criteria are also discussed.

Metal surfaces must often be cleaned before subsequent operations to remove unwanted substances such as pigmented drawing compounds, unpigmented oil and grease, chips and cutting fluids, polishing and buffing compounds, rust and scale, and miscellaneous contaminants. The article describes common cleaning processes, including alkaline, electrolytic, solvent, emulsion, molten salt bath, ultrasonic and acid cleaning as well as pickling and abrasive blasting. It also explains how to select the appropriate process for a given soil type and surface composition.

The various methods of furnace, torch, induction, resistance, dip, and laser brazing are used to produce a wide range of highly reliable brazed assemblies. However, imperfections that can lead to braze failure may result if proper attention is not paid to the physical properties of the material, joint design, prebraze cleaning, brazing procedures, postbraze cleaning, and quality control. Factors that must be considered include brazeability of the base metals; joint design and fit-up; filler-metal selection; prebraze cleaning; brazing temperature, time, atmosphere, or flux; conditions of the faying surfaces; postbraze cleaning; and service conditions. This article focuses on the advantages, limitations, sources of failure, and anomalies resulting from the brazing process. It discusses the processes involved in the testing and inspection required of the braze joint or assembly.

The selection of surface treatments for copper and copper alloys is generally based on application requirements for appearance and corrosion resistance. This article describes cleaning, finishing, and coating processes for copper and copper alloys. These processes include pickling and bright dipping, abrasive blast cleaning, chemical and electrochemical cleaning, mass finishing, polishing and buffing, electroless plating, immersion plating, electroplating, passivation, coloring, and organic coatings.

This article provides information on the factors influencing the selection of the proper corrosion-resistant coating system. It focuses on the proper execution of surface preparation and the available surface preparation methods. The preparation process includes the removal of visible contaminants, removal of invisible contaminants, and roughening of the surface. Solvent or chemical washing, steam cleaning, hand tool cleaning, power tool cleaning, water blasting, and abrasive blast cleaning, are some preparation methods discussed. The article describes the most common application techniques of coating as well as the equipment used. An overview of some of the most common coating inspection points and inspection equipment is also provided.

This article presents general design principles for different types of surface-finishing processes, such as cleaning, organic coatings, and inorganic coatings applied by a variety of techniques. It discusses the factors that influence the selection of surface-finishing processes. These include fabrication processes, size, weight, functional requirements, and design features. The article discusses the design as an integral part of manufacturing. It contains tables that summarize the design limitations for selected surface-preparation, organic finishing, and inorganic finishing processes.

This article discusses several aspects of biocompatibility of polymers, including the selection of a suitable polymer, specific use of a material, contact of polymer on body site, and duration of the contact. It describes the factors influencing the biological response of the polymer from a biocompatibility perspective. These include raw materials, the manufacturing process, cleaning and sterilization processes, and biodegradation and biostability. The article reviews the general testing methods of polymers, such as chemical, mechanical and thermal. It concludes with a section on the guidance, provided by the regulatory authorities, on the biocompatibility testing of polymers and polymer-containing devices that can aid in selecting the right analysis.

A wide variety of stop-off technologies for heat treatment are used to selectively prevent the diffusion of carbon and/or nitrogen during atmosphere carburizing, carbonitriding, vacuum carburizing, and various forms of nitriding. In addition to selective stop-off, technologies are also available for scale prevention in open-fired furnaces. This article describes two stop-off technologies, mechanical masking and copper plating, along with stop-off paints/compounds. Prior to the application of stop-off paints, the part surface of the furnaces should be properly cleaned and dried. The article also describes the usage of stop-off paints in different heat treating processes, namely, carburizing and carbonitriding, deep carburizing, vacuum carburizing, nitriding and nitrocarburizing, and plasma nitriding. The article concludes by reviewing the application methods of stop-off paints: brushing, dipping, dispensing, spraying and stamping.

Adhesive bonding is used to assemble composite components into larger structures. Finished components that are damaged during assembly or service are often repaired with adhesive-bonding techniques. This article summarizes criteria for adhesive selection and illustrates typical secondary adhesively bonded joint configurations. It discusses the highly loaded joint considerations of adhesives. The article describes the epoxy adhesives commonly used for the bonding or repair of composite structures. It discusses the surface preparation of composites and metals, and honeycomb processing, including perimeter trimming, mechanical forming, heat forming, core splicing, contouring, and cleaning. The article presents basic steps involved in the adhesive-bonding process and concludes with a discussion on adhesive applications and tooling.

Martensitic stainless steels are the least corrosion-resistant of all stainless alloys. The traditional martensitic stainless steels are iron/chromium/carbon alloys, sometimes with a small amount of nickel and/or molybdenum. This article provides an overview on the influences of the various possible alloying elements on the key properties of martensitic stainless steels. It describes the various preparation processes, namely, atmosphere selection, cleaning, and preheating, prior to heat treatment for these steels. Common heat treatment methods include annealing, hardening, tempering, and stress relieving. The article lists the compositions of casting alloys and also describes the effect of tempering temperature on the hardness, strength, ductility, and toughness properties of the alloys.

This article focuses primarily on the various steps involved in the brazing of heat-resistant alloys (nickel- and cobalt-base alloys). The major steps include the selection of brazing filler metals, surface cleaning and preparation, brazing processes and their corresponding atmospheres, and fixturing. The article also provides an overview of the brazing of blow-alloy steels and tool steels and oxide dispersion-strengthened alloys.

Uniform corrosion refers to the attack on an exposed metal surface that results in homogeneous thickness loss that is evaluated by mass loss or measurement of thickness change. This article focuses on the various processes involved in mass loss tests, namely, selection and preparation of suitable test specimens, planning of the experimental technique, posttest sample cleaning, data acquisition, and reporting. It further discusses the test variables addressed during the experimental planning and provides an overview of the other test and evaluation methods of evaluating uniform corrosion.

Cast irons and carbon steels are brazeable materials, although the brazeability of cast iron is lower than that of carbon steel. The article provides a detailed discussion on the brazeability of different types of cast iron (malleable iron, ductile iron, and gray iron), carbon steels, and dissimilar metals. It describes the factors considered in the selection of filler-metal for cast iron and carbon steel brazing, such as temperature and environment, brazed joint design, heat source, and heat-treatment requirements. The article also discusses the basic considerations in cleaning and fixturing procedures, filler metal and flux/atmosphere feeding procedures, and the heating methods of cast iron and carbon steel brazing.

Zirconium and its alloys are available in two general categories: commercial grade and reactor grade. This article discusses the welding processes that can be used for welding any of the zirconium alloys. These include gas-tungsten arc welding (GTAW), gas-metal arc welding (GMAW), plasma arc welding (PAW), electron-beam welding (EBW), laser-beam welding (LBW), friction welding (FRW), resistance welding (RW), resistance spot welding (RSW), and resistance seam welding (RSEW). The article reviews the selection of shielding gases and filler metals for welding zirconium alloys. It concludes with a discussion on process procedures for welding zirconium alloys.

Liquid-penetrant inspection is a nondestructive method used to find discontinuities that are open to the surface of solid, essentially nonporous materials. This article describes the physical principles and the process of liquid-penetrant inspection. It also describes the basic penetrant systems, such as the water-washable system, the post-emulsifiable system, and the solvent-removable system. The article provides information on the liquid-penetrant materials, emulsifiers, solvent cleaners, and developers. It details the equipment requirements, selection of penetrant system, and specifications and standards for the liquid-penetrant inspection.

This article provides an overview of surface contaminants that may affect the heat treatment processes and end-product quality. It presents information on the chemicals used to clean different surface contaminants of steels. The article discusses three types of cleaning methods, namely, mechanical, chemical, and electrochemical and their effectiveness and applicability. The mechanical cleaning methods include grinding, brushing, steam or flame jet cleaning, abrasive blasting, and tumbling. Solvent cleaning, emulsion cleaning, alkaline cleaning, acid cleaning, pickling, and descaling are chemical cleaning methods. The electrochemical cleaning methods include electropolishing, electrolytic alkaline cleaning, and electrolytic pickling. The article provides information on cleanliness measurement methods such as qualitative tests and quantitative tests to ensure product quality. Health hazards that may be associated with each cleaning method and the general control measures to be used for each hazard are tabulated.

This article addresses several distinct aspects of corrosion that should be taken into account when solving the corrosion problems in the food and beverage industries. It summarizes the role of international standards in developing food and beverage industries: the American Society of Mechanical Engineers (ASME), American Welding Society (AWS), and Food and Drug Administration (FDA). The article tabulates the approximate pH values of various foods. It describes the contamination of food products by corrosion. A discussion on specific stainless steels, their corrosion resistance, fabrication, and applications is presented and compared to other potential materials of construction. The article also presents case studies of stainless steel corrosion and concludes with a discussion on corrosion in cleaning and sanitizing processes.

Thermal spray coating involves certain precoating operations, such as cleaning, surface preparation, and masking, that are critical to the overall quality of the coating system. In addition to these, certain other elements are considered prior to the coating, namely, customer requirements, coating function, part geometry, substrate metallurgy, structure, and thermal history. This article provides a detailed account of the various processes of surface preparation, namely, cleaning, roughening, dry abrasive grit blasting, and machining and macro roughening processes. It outlines the masking and fixturing techniques and stripping of coatings.