This article provides a detailed discussion on the types of furnace atmospheres required for heat treating. These include generated exothermic-based atmospheres, generated endothermic-based atmospheres, generated exothermic-endothermic-based atmospheres, generated dissociated-ammonia-based atmospheres, industrial gas nitrogen-base atmospheres, argon atmospheres, and hydrogen atmospheres. Atmospheres for backfilling, partial pressure operation, and quenching in vacuum are also discussed. Furnace atmospheres constitute four major groups of safety hazards in heat treating: fire, explosion, toxicity, and asphyxiation. The article reviews the fundamentals of principal gases and vapors. It describes how the evaluation of the atmospheric requirements of heat treating furnaces is influenced by factors such as cost of operation and capital investment.

Health and safety are critically important issues, and there are numerous aspects of the production and use of metal powders that may entail exposure to hazardous conditions. This article provides a discussion on the issues associated with the safe production and handling of metal powders and the safe operation of continuous mesh belt sintering furnaces with combustible atmospheres. It also provides a comprehensive high-level overview of the safety-related issues and concerns related to the use of compacting presses in the manufacturing sector.

Heat treating involves the use of fuel gases for heating and gases in the furnace atmosphere. This article describes the hazards associated with furnace atmospheres and the related safety considerations. It discusses the effect of fuel on combustion efficiency. The article also contains tables that provide information on the physical, thermal and combustion properties of common gases and liquids, and the heat content of various gases.

This article discusses the requirements for safe design, installation, operation, inspection, testing, and maintenance of sintering atmosphere generators and atmosphere supply systems for both personal and environment safety. The four intrinsic dangers associated with producing and using common sintering atmosphere gases are explosion, fire, toxicity, and asphyxiation.

Controlled atmosphere chambers are used to control the surface chemistry of the metals that are being processed. This article focuses on the various types of controlled atmospheres used in induction heat treating and brazing, namely, inert gas atmospheres based on argon and helium; prepared and commercial nitrogen-base atmospheres; and brazing atmospheres. It provides detailed information on two types of controlled atmosphere chambers: atmosphere and vacuum. The article also describes the selection factors, advantages, and disadvantages of these chambers.

This article presents an overview of the rules, regulations, and techniques implemented to minimize the safety hazards associated with welding, cutting, and allied processes. Safety management, protection of the work area, process-specific safety considerations, and robotic and electrical safety are discussed. The article explains the use of personal protective equipment and provides information on protection against fumes, gases, and electromagnetic radiation. It concludes with a discussion on safe handling of compressed gases as well as the prevention and protection of fire and explosion.

Risk assessments (RAs) must be customized to the specific workplaces and to the actual work being performed. It is performed to make the workers and their management aware of the hazards in the work environment, identify each risk in a methodical manner, and put in place a plan to mitigate the hazards. Information on risk assessment presented in this article provides a logical approach that can be taken to minimize risk and maximize thermal spray practitioners' safety. There are basically four steps to improving operational safety by using RAs: identifying the risks for each activity, rating the risk, putting in place the actions required to minimize risk, and reviewing and updating the RAs on a regular basis. The article presents two case studies to illustrate the concepts involved in RAs.

During metal powder production, powder and/or dust handling, compaction, and part finishing operations, many safety and environmental risks exist. This article is a detailed account of the types of safety hazards that can exist and the issues that occur during metal powder handling, as well as recommendations and strategies that can be employed to both prevent and protect against damaging effects from powder exposure, fire and/or explosions, or environmental impact events.

The hazards associated with thermal spray deposition processes include ultraviolet and infrared radiation; acoustical noise; and by-product production in the forms of nitrous oxides, ozone, fumes, and dust. The most important consideration in health and safety is to use the engineered controls of hazards. This article provides a brief description of the spray booth, the most commonly used engineering tool to separate the operator from the thermal spray process and confine the associated hazards. It also presents guidelines on the proper and safe handling of industrial gases and ventilation and heat exhaust. The article provides information on the personal protective equipment for eyes and skin from radiation, and ears from noise. It also discusses other potential safety hazards associated with thermal spraying, namely, magnetic fields and infrasound.

Safety is an important consideration in all welding, cutting, and related work. This article discusses the basic elements of safety general to all welding, cutting, and related processes. It includes safety procedures common to a variety of applications. The most important component of an effective safety and health program is management support and direction. The article reviews the role of management, training, housekeeping, and public demonstrations in welding safety to minimize personal injury and property damage. It provides information on the safety measures for eye and face protection in various welding and cutting operations. Injuries and fatalities from electric shock in welding and cutting operations can occur if proper precautionary measures are not followed. The article discusses the electrical safety aspects to be considered for various welding and cutting operations.

This article provides members of the thermal spray community with practical recommendations for the safe installation, operation, and maintenance of gas equipment used in the thermal spray process. It focuses on safety issues concerning gas equipment used in conjunction with thermal spray equipment at consumer sites. The article covers the gas sources (bulk or gaseous), the piping (hard and soft) leading to the gas console or the torch, and the specific safety devices used to help ensure safe operation. It discusses the characteristics and safety hazards of gases such as oxygen, compressed air, nitrogen, helium, argon, carbon dioxide, hydrogen, acetylene, kerosene, propylene, propane, and natural gas. The article also provides information on the maintenance and safety practices involved in the plumbing configurations of cylinder gas supply units and bulk gas supply units.

This article discusses the safety issues associated with the design and operation of thermal spray booths and spray box structures and the equipment or systems required for operating thermal spray processes. It describes the design elements necessary to mitigate sound, dust and fume, ultraviolet light, and mechanical hazards. The means selected for safeguarding personnel must be based on a formal risk assessment that meets ANSI/RIA standards. The safeguards include sensing devices, barriers, awareness signals, procedures, and training. It also provides guidelines that are intended to increase the safety awareness and the use of safety practices for gas and liquid piping and electrical equipment within thermal spray installations.

Environmental and worker health regulations have increased the costs associated with cadmium coating application and cadmium-beating waste disposal, thus creating economic incentives for industrial users to seek cadmium plating replacements. This article presents a cadmium replacement identification matrix that includes information on the specifications, corrosion control performance, environment-assisted cracking, coating lubricity, environmental and worker health regulations, and cost and performance factors for various replacement processes.

Furnace brazing is a mass production process for joining the components of small assemblies with a metallurgical bond, using a nonferrous filler metal as the bonding material and a furnace as the heat source. This article presents the advantages and limitations of the furnace brazing and reviews three types of furnaces: continuous, semi-continuous, and batch. It presents three examples of the industrial applications of the furnace brazing: vacuum devices, jet engines, and automotive industries. The health and safety guidelines to be followed during the furnace brazing are also discussed.

This article provides information on personal protective equipment (PPE), consistent with the Occupational Safety and Health Administration's Personal Protective Equipment Standard (29 CFR 1910.132-138). This standard is intended to protect individuals from the risk of injury by creating a barrier against workplace hazards. This article provides guidelines for establishing PPE programs with an overview of the responsibilities for employers, supervisors, and employees, assessing hazards associated with thermal spray operations, and training workers about PPE, as well as guidelines for selecting, using, and maintaining PPE. It presents an overview of eye, face, head, hand, foot, hearing, fall, and respiratory protection. Respiratory and hearing protection should be used in conjunction with industrial hygiene monitoring.

This article discusses the occupational health hazards related to industrial protective coating application and removal. It explains the health hazards associated with coating constituents such as lead, cadmium, chromium, arsenic, silica, and asbestos. The article also discusses hazard evaluation, hazard controls, Occupational Safety and Health Administration standards, and industry consensus standards. It concludes with a description of containment systems to prevent environmental exposures from industrial paint removal projects.

Dip soldering is accomplished by submerging parts to be joined into a molten solder bath. This article provides an overview of dip soldering, its applications, and the equipment used. The article also provides information on the safety measures to be taken by production personnel when operating solder pots.

Solvent cleaning is a surface preparation process that can be accomplished in room temperature baths (cold cleaning ) or by condensing vapors of a solvent on a workpiece (vapor degreasing). This article provides a detailed discussion on solvents, equipment, process limitations and applications, and safety and health hazards of cold cleaning and vapor degreasing. It also includes information on control of contamination, conservation and recovery of solvent, and disposal of solvent wastes.

Control of temperature and furnace atmospheres has become increasingly critical to successful heat treating. Temperature instrumentation and control systems used in heat treating include temperature sensors, controllers, final control elements, measurement instruments, and set-point programmers. This article describes these items and discusses the classifications and control of furnace atmospheres. The article also describes the surface carbon control devices available for the wide variety of furnace atmospheres and evaluation of carbon control. Finally, the article provides a set of guidelines for safety procedures that are common to all industrial heat treating furnace installations.

Laser-beam welding (LBW) uses a moving high-density coherent optical energy source, called laser, as the source of heat. This article discusses the advantages and limitations of LBW and tabulates energy consumption and efficiency of LBW relative to other selected welding processes. It provides information on the applications of microwelding with pulsed solid-state lasers. The article describes the modes of laser welding such as conduction-mode welding and deep-penetration-mode welding, as well as major independent process variables for laser welding, such as laser-beam power, laser-beam diameter, absorptivity, and traverse speed. It concludes with information on various hazards associated with LBW, including electrical hazards, eye hazards, and chemical hazards.