Search Results for Uhlig theory

This article describes the Schottky defect and the Frenkel defect in oxides. It provides information on the p-type metal-deficit oxides and n-type semiconductor oxides. The article discusses diffusion mechanisms and laws of diffusion proposed by Fick. It explains the oxide texture of amorphous and epitaxy oxide layers and presents equations for various oxidation reaction rates. The article reviews different theories to describe the oxidation mechanism. These include the Cabrera-Mott, Hauffe-IIschner, Grimley-Trapnell, Uhlig, and Wagner theories.

This article analyzes the estimates of the cost of corrosion, made in various countries at various times. The data are extrapolated to a 2004 base and then projected to the global economy. The chronological order of the countries are the United States of America, the United Kingdom, Australia, Japan, Canada, Germany, Poland, South Africa, Czechoslovakia, Belgium, Netherlands, Sweden, Finland, the Union of Soviet Socialist Republics, Kuwait, India, and the Basque Region.

Pitting is a form of localized corrosion that is often a concern in applications involving passivating metals and alloys in aggressive environments. This article describes the test methods for pitting corrosion. These methods include ASTM G 48, ASTM F 746, ASTM G 61, ASTM G 100, and electrochemical noise measurements. The visual examination, metallographic examination, and nondestructive inspection of pits are discussed. The article reviews the procedures for the use of standard charts, metal penetration, statistical analysis, and loss in mechanical properties to quantify the severity of pitting damage.

This article reviews the types of passivity and presents tactics that employ passivity to control corrosion. Thermodynamics provides a guide to the conditions under which passivation becomes possible. A valuable guide to thermodynamics is the potential-pH diagram and the Pourbaix diagram. The article presents a potential-pH diagram for the iron-water system and an illustration of an idealized anodic polarization curve for a metal surface, which serves as a basis for describing the kinetics of passivation. It discusses five properties of passive films: thickness, composition, structure, electronic properties, and mechanical properties. The article outlines three possible processes that can form passive films: direct film formation, dissolution precipitation, and anodic oxidation of metal ions in solution. It describes the breakdown of the passive film using various models and highlighting the effect of alloy composition and structure.

Corrosion modeling is an essential benchmarking element for the selection and life prediction associated with the introduction of new materials or processes. These models are most naturally expressed in terms of differential equations or in other nonexplicit forms of mathematics. This article discusses the principles and applications of various models developed for understanding the corrosion mechanism. These models include mechanistic models, including Pourbaix model, thermophysical module, electrochemical module, and ion association model; risk-based models; and knowledge models. The risk-based model and knowledge models are illustrated with examples for better understanding. The article also describes boundary-element modeling and pitting corrosion fatigue models.

This article focuses on the different parameters that influence the pitting corrosion of passive metals. The parameters are environment, metal composition, potential, temperature, surface condition, alloy composition, stochastic nature of the processes, and inhibitors. In addition, the article provides a detailed discussion on the various stages of pitting. These include passive film breakdown, metastable pitting, pit growth, and pit stifling or death.

This article provides an overview of the degradation of metals and alloys in aqueous systems. The importance of the hydrogen ion lies in its ability to interact with an alloy surface. The article describes the effects of various conditions of pH on corrosion including strongly acid conditions, near-neutral conditions, and strongly basic conditions as well as the effects of temperature on corrosion. The influence of the fluid flow rate on corrosion depends on the alloy, fluid components, fluid physical properties, geometry in which the fluid is contained, and corrosion mechanism. The article discusses the influence of fluid flow rate through specific examples. It concludes with information on how the concentration of dissolved species works with other variables to influence corrosion behavior.

Fretting is a wear phenomenon that occurs between two mating surfaces; initially, it is adhesive in nature, and vibration or small-amplitude oscillation is an essential causative factor. Fretting generates wear debris, which oxidizes, leading to a corrosion-like morphology. This article focuses on fretting wear related to debris formation and ejection. It reviews the general characteristics of fretting wear, with an emphasis on steel. The review covers fretting wear in mechanical components, various parameters that affect fretting; quantification of wear induced by fretting; and the experimental results, map approach, measurement, mechanism, and prevention of fretting wear. This review is followed by several examples of failures related to fretting wear.

Most alloys are susceptible to intergranular corrosion, also known as intergranular attack (IGA), when exposed to specific environments. This article reviews the theory and application of acceptance tests for detecting the susceptibility of stainless steels and nickel-base alloys to IGA. It describes the most serious forms of structure-dependent corrosion, such as stress-corrosion cracking and exfoliation, in aluminum alloys including strain-Hardened 5xxx (Al-Mg) alloys and heat treated high-strength alloys. The article concludes with information on the evaluation tests for other alloys such as magnesium alloys and zinc die casting alloys.

This article discusses the principles of corrosion and the basis of the various prevention measures that can be taken for different corrosion modes. It describes aqueous corrosion phenomena in terms of the electrochemical reactions that occur at the metal-environment interface. The article explains the specific forms of corrosion, including general corrosion, localized attack, and environmentally assisted cracking. It provides a discussion on the engineering aspects of design that can, without due care and attention, precipitate unexpected premature failure. The article reviews ways to improve corrosion awareness and prevent corrosion/degradation. It describes a life prediction method with an example of environmental degradation in light-water nuclear reactors. The article concludes with a discussion on the validation of life-prediction algorithms and their applications.

Fretting is the small-amplitude oscillatory movement that can occur between contacting surfaces, which are nominally at rest. This article discusses fretting wear in mechanical components and the mechanisms of fretting wear. It describes the role of fretting conditions, such as fretting duration, slip amplitude, normal load, fretting frequency, contact geometry, type of vibration, and surface finish, as well as the role of environmental conditions. The article reviews the influence of an aqueous environment on the mechanism of fretting. The steps that can be taken to reduce or eliminate damage due to fretting are extremely diverse. The article presents some general indications of how to address the fretting wear problem.

This article describes the test methods for evaluating the durability of a metal in soil. It provides useful information on soil characteristics such as soil electrical resistivity, pH value, and soil texture. Specimen design, preparation, burial, and retrieval techniques are discussed. The type of information sought during soil-induced corrosion evaluation controls the design configuration and the nature of the corrosion measurements. Consideration of these factors during the planning stage helps the corrosion engineer to obtain the maximum amount of information with the minimum number of problems.

Stress-corrosion cracking (SCC) is a cracking phenomenon that occurs in susceptible alloys, and is caused by the conjoint action of tensile stress and the presence of a specific corrosive environment. This article provides an overview of the anodic dissolution mechanisms and cathodic mechanisms for SCC. It discusses the materials, environmental, and mechanical factors that control hydrogen embrittlement and SCC behavior of different engineering materials with emphasis on carbon and low-alloy steels, high-strength steels, stainless steels, nickel-base alloys, aluminum alloys, and titanium alloys.

This article details factors that have been used for evaluating the susceptibility of alloys to stress-corrosion cracking. Many considerations impacting the validity and accuracy of information gathered from laboratory testing programs are reviewed. The article highlights the main characteristics of probability distributions, such as normal distribution, log-normal distribution, exponential distribution, Poisson distribution, and extreme-value distribution. It also provides information on the statistical concepts to produce effective test programs.

This article reviews the general characteristics of fretting wear in mechanical components with an emphasis on steel. It focuses on the effects of physical variables and the environment on fretting wear. The variables include the amplitude of slip, normal load, frequency of vibration, type of contact and vibration, impact fretting, surface finish, and residual stresses. The form, composition, and role of the debris are briefly discussed. The article also describes the measurement, mechanism, and prevention of fretting wear. It concludes with several examples of failures related to fretting wear.

This article discusses the definitions, classifications, structural features, vapor pressure values, corrosion inhibition mechanisms, and methods of evaluation of vapor-phase-corrosion inhibitors or volatile corrosion inhibitors (VCIs). Practical methods of using VCIs for corrosion protection of aluminum, ferrous, and nonferrous alloys are discussed with specific examples. The article contains tables that summarize the applications of different VCIs used for protecting ferrous metals, copper and its alloys, and silver.

Stray current can be defined as a current in structures that are underground or immersed in an electrolyte that most often accelerate corrosion on a structure where a positive current leaves the structure to enter the earth or an electrolyte. This article provides a description of the principles of stray current and a discussion on the major types of stray current and their properties and prediction methods. It discusses the consequences of stray current and describes the interference tests used for mapping the path of the stray currents. The article also highlights the methods of mitigating the source of stray current.

This article summarizes the fatigue and fracture resistance of selected magnesium alloys. It reviews the effects of surface condition and test variables on fatigue strength. The article also provides an overview of the fatigue crack growth, fracture toughness, and stress-corrosion cracking of magnesium alloys.

This article addresses electrochemical methods for instantaneous rate determination and threshold determination as well as nonelectrochemical methods that can determine incremental or cumulative rates of corrosion. Electrochemical methods for the study of galvanic corrosion rates and localized corrosion and evaluation of corrosion rates under paints are also discussed. The article describes nonelectrochemical methods that can determine incremental or cumulative rates of corrosion. Methods presented include polarization methods, polarization resistance methods, electrochemical impedance methods, frequency modulation methods, electrochemical noise resistance, potential probe methods, cyclic potentiodynamic polarization methods, potentiostatic and galvanostatic methods, electrochemical noise (EN) methods, scratch-repassivation method, and electrochemical impedance spectroscopy (EIS) techniques. Gravimetric determination of mass loss, electrical-resistance methods, magnetic methods, quartz crystal microbalance method, solution analysis methods, and metrological methods are nonelectrochemical methods. The article presents an electrochemical test that examines the susceptibility of stainless steel alloys to intergranular corrosion.

This article begins with the discussion on the background of metal-matrix composites (MMC) and moves into a broad description of the general parameters affecting the corrosion of MMC. It discusses the primary sources of MMC corrosion that include galvanic corrosion between MMC constituents, chemical degradation of interphases and reinforcements, microstructure-influenced corrosion, and processing-induced corrosion. The article elaborates on the corrosion behavior of specific aluminum, magnesium, titanium, copper, stainless steel, lead, depleted uranium, and zinc MMCs systems. It concludes with a description on the corrosion control of MMCs using protective coatings and inhibitors.