1-20 of 31 Search Results for

UNS S17400

Sort by
Series: ASM Handbook Archive
Volume: 12
Publisher: ASM International
Published: 01 January 1987
DOI: 10.31399/asm.hb.v12.a0000612
EISBN: 978-1-62708-181-8
... S17400), 36 to 44 HRC. Seals were missing from both fractured and unbroken yokes. The inside of the broken part was filled with particulate matter, sand, and corrosion products, indicating that water had been present. Fig. 740 : Unbroken deflector yoke. Note pitting. 4×. Fig. 741 : Fracture surface...
Image
Published: 01 January 1990
Fig. 66 Time to failure in an aqueous solution (5% NaCl and 0.5% acetic acid deaerated and saturated with hydrogen sulfide) as a function of yield strength for UNS S41000, S15500, S17400, and S13800 stainless steels loaded to 345 MPa (50 ksi) in tension. Tempering temperatures, in degrees More
Series: ASM Handbook
Volume: 18
Publisher: ASM International
Published: 31 December 2017
DOI: 10.31399/asm.hb.v18.a0006372
EISBN: 978-1-62708-192-4
...) duplex Plate Annealed 700 100 500 70 38 98 HRB UNS S32205 (2205) Plate Annealed 750 110 510 75 35 31 HRC max UNS S32750 (2507) duplex Plate Annealed 830 120 580 85 20 32 HRC max UNS S17400 (17-4PH) precipitation-hardened Plate H900 1310 190 1170 170...
Series: ASM Handbook
Volume: 23
Publisher: ASM International
Published: 01 June 2012
DOI: 10.31399/asm.hb.v23.a0005687
EISBN: 978-1-62708-198-6
...-strengthened 21Cr-10Ni-3Mn-2.5Mo Hips; shoulders; elbows Fe-23Mn-21Cr-1Mo ASTM F2229 Fixation devices; elbows Fe-17Cr-4Ni-4Cu 17-4 PH, 17 4 PH, AISI Type 630, CB-7Cu-1, UNS S17400, UNS J92200, UNS S17480, UNS W37410 Fixation devices Fe-19Cr-10Ni UNS S30400, S30453 BS:304S15, 304S16...
Series: ASM Desk Editions
Publisher: ASM International
Published: 01 December 1998
DOI: 10.31399/asm.hb.mhde2.a0003115
EISBN: 978-1-62708-199-3
...–1.35 Al; 0.01 N S15500 15-5PH 0.07 1.00 1.00 14.0–15.5 3.5–5.5 … 0.04 0.03 2.5–4.5 Cu; 0.15–0.45 Nb S17400 17-4PH 0.07 1.00 1.00 15.0–17.5 3.0–5.0 … 0.04 0.03 3.0–5.0 Cu; 0.15–0.45 Nb S45000 Custom 450 0.05 1.00 1.00 14.0–16.0 5.0–7.0 0.5–1.0 0.03 0.03 1.25–1.75...
Book: Machining
Series: ASM Handbook
Volume: 16
Publisher: ASM International
Published: 01 January 1989
DOI: 10.31399/asm.hb.v16.a0002180
EISBN: 978-1-62708-188-7
... 1.00 0.040 0.030 14.00–15.50 3.50–5.50 … … 0.15–0.45 Nb; 2.50–4.50 Cu S17400 (c) ⟨630⟩ 0.07 1.00 1.00 0.040 0.030 15.50–17.50 3.00–5.00 … … 0.15–0.45 Nb; 3.00–5.00 Cu S17700 (d) ⟨631⟩ 0.09 1.00 1.00 0.040 0.040 16.00–18.00 6.50–7.75 … … 0.75–1.50 Al S35000 (d...
Series: ASM Handbook
Volume: 13A
Publisher: ASM International
Published: 01 January 2003
DOI: 10.31399/asm.hb.v13a.a0003702
EISBN: 978-1-62708-182-5
... about corrosion, sometimes the direct result of poor communication and/or a lack of appreciation of the true service conditions ( Ref 5 ). As an example, a type 316 stainless steel (Unified Numbering System, or UNS, S31600) pipe was considered a suitable choice for admitting steam and subsequently air...
Series: ASM Handbook
Volume: 1
Publisher: ASM International
Published: 01 January 1990
DOI: 10.31399/asm.hb.v01.a0001046
EISBN: 978-1-62708-161-0
... Cu; 0.15–0.45 Nb 17-4 PH S17400 0.07 1.00 1.00 15.0–17.5 3.0–5.0 0.04 0.03 3.0–5.0 Cu; 0.15–0.45 Nb 17-7 PH S17700 0.09 1.00 1.00 16.0–18.0 6.5–7.75 0.04 0.04 0.75–1.5 Al (a) Single values are maximum values unless otherwise indicated. (b) Optional In each...
Series: ASM Handbook
Volume: 6
Publisher: ASM International
Published: 01 January 1993
DOI: 10.31399/asm.hb.v06.a0001412
EISBN: 978-1-62708-173-3
... … A 564, A 705  P, Sh, St H900 1310 190 1170 170 5–10 (c) … 40 48 A 693  P, Sh, St H1100 965 140 790 115 5–14 (c) … 29 40 A 693 17-4PH (UNS S17400)  B, F H900 (d) 1310 190 1170 170 10 40; 35 (e) 40 … A 564, A 705  B, F H925 (d) 1170 170 1070 155 10...
Series: ASM Handbook
Volume: 13C
Publisher: ASM International
Published: 01 January 2006
DOI: 10.31399/asm.hb.v13c.a0004139
EISBN: 978-1-62708-184-9
.... Nitronic 50 is widely used in sailboat rigging, chains, fasteners, pumps, and other applications. Another grade of stainless steel that has found wide use in recreational and workboats as propeller and pump shafting, hydrofoil struts, and other marine applications is UNS S17400 (17-4 PH), precipitation...
Series: ASM Handbook
Volume: 8
Publisher: ASM International
Published: 01 January 2000
DOI: 10.31399/asm.hb.v08.a0003285
EISBN: 978-1-62708-176-4
... AISI 4337 484 AISI 4337 415 14 2 AISI 1034 415 AISI 1034 415 14 2 Waukesha 88 141 Type 303 180 345+ 50+ 141 Type 201 202 345+ 50+ 141 Type 316 200 345+ 50+ 141 S17400 405 345+ 50+ 141 20Cr-80Ni 180 345+ 50+ Type 201 202 Type 201 202 104 15 202...
Series: ASM Handbook
Volume: 23
Publisher: ASM International
Published: 01 June 2012
DOI: 10.31399/asm.hb.v23.a0005673
EISBN: 978-1-62708-198-6
... S17400 17-4PH 0.07 1.00 1.00 15.0–17.5 3.0–5.0 … 0.04 0.03 3.0–5.0 Cu; 0.15–0.45 Nb S45000 Custom 450 0.05 1.00 1.00 14.0–16.0 5.0–7.0 0.5–1.0 0.03 0.03 1.25–1.75 Cu; 8 × %C min Nb S45500 Custom 455 0.05 0.50 0.50 11.0–12.5 7.5–9.5 0.50 0.04 0.03 1.5–2.5 Cu; 0.8–1.4 Ti...
Series: ASM Handbook
Volume: 13B
Publisher: ASM International
Published: 01 January 2005
DOI: 10.31399/asm.hb.v13b.a0006543
EISBN: 978-1-62708-183-2
...-9DL S63198 7.97 0.29 Precipitation-hardening stainless steels 15-7Mo S15700 7.804 0.2819 17-4 PH S17400 7.8 0.28 17-7 PH S17700 7.81 0.282 Nickel-base alloys D-979 N09979 8.27 0.299 Nimonic 80A N07080 8.25 0.298 Nimonic 90 N07090 8.27 0.299 M-252...
Series: ASM Handbook
Volume: 4D
Publisher: ASM International
Published: 01 October 2014
DOI: 10.31399/asm.hb.v04d.a0005961
EISBN: 978-1-62708-168-9
... be selected to minimize this phenomenon if high-temperature use is contemplated. Alloy 17-4 PH (Type 630) Alloy 17-4 PH (UNS S17400) is a martensitic PH steel with limited formability when supplied in the solution-treated condition. Care should be taken in using this alloy in the solution-treated...
Series: ASM Handbook
Volume: 13B
Publisher: ASM International
Published: 01 January 2005
DOI: 10.31399/asm.hb.v13b.a0003812
EISBN: 978-1-62708-183-2
...-hardening grades S17400 630 0.07 1.00 0.040 0.030 1.00 15.0–17.5 3.00–5.00 … 3.00–5.00Cu, 0.15–0.45Nb S17700 631 0.09 1.00 0.040 0.030 1.00 16.0–18.0 6.50–7.75 … 0.75–1.50Al S15700 632 0.09 1.00 0.040 0.030 1.00 14.0–16.0 6.5–7.7 2.00–3.00 0.75–1.50Al S35000 633...
Series: ASM Handbook
Volume: 5
Publisher: ASM International
Published: 01 January 1994
DOI: 10.31399/asm.hb.v05.a0001305
EISBN: 978-1-62708-170-2
... … 0.75–1.50 Al S17400 17-4PH (g) 0.07 1.00 1.00 0.040 0.030 15.50–17.50 3.00–5.00 … … 0.15–0.45 Nb; 3.00–5.00 Cu S17700 PH 17-7 (g) 0.09 1.00 1.00 0.040 0.040 16.00–18.00 6.50–7.75 … … 0.75–1.50 Al S35000 633 (b) 0.07–0.11 0.50–1.25 0.50 0.040 0.030 16.00–17.00...
Series: ASM Handbook
Volume: 6
Publisher: ASM International
Published: 01 January 1993
DOI: 10.31399/asm.hb.v06.a0001476
EISBN: 978-1-62708-173-3
... Type UNS designation Covered electrodes Bare welding wire Dissimilar PH stainless steels Martensitic 17-4 PH S17400 AMS 5827B (17-4 PH) or E308 AMS 5826 (17-4 PH) or ER308 E309 or ER309, E309Cb or ER309Cb 15-5 PH S15500 AMS 5827B (17-4 PH) or E308 AMS 5826 (17-4 PH) or ER308...
Series: ASM Handbook
Volume: 24
Publisher: ASM International
Published: 15 June 2020
DOI: 10.31399/asm.hb.v24.a0006549
EISBN: 978-1-62708-290-7
Series: ASM Handbook
Volume: 19
Publisher: ASM International
Published: 01 January 1996
DOI: 10.31399/asm.hb.v19.a0002403
EISBN: 978-1-62708-193-1
... 15.0–17.0 1.25–2.50 0.04 0.03 … 1030 (149) ht Precipitation hardening types (f) 15-5PH S15500 0.07 1.00 1.00 14.0–15.5 3.5–5.5 0.04 0.03 2.5–4.5Cu, 0.15–0.45 (Nb + Ta) 1000 (145) ht 17-4PH S17400 0.07 1.00 1.00 15.5–17.5 3.0–5.0 0.04 0.03 3.0–5.0Cu, 0.15–0.45 (Nb...
Series: ASM Handbook
Volume: 6
Publisher: ASM International
Published: 01 January 1993
DOI: 10.31399/asm.hb.v06.a0001434
EISBN: 978-1-62708-173-3
... approximately matching compositions, as classified by the American Welding Society (AWS), are also listed in Table 1(b) , but only for selected base metals. Compositions of nominally martensitic stainless steels Table 1(a) Compositions of nominally martensitic stainless steels Designation UNS...