1-20 of 641 Search Results for

Intergranular stress corrosion

Sort by
Image
Published: 01 January 2006
Fig. 39 An example of severe intergranular attack/intergranular stress-corrosion cracking at a tube support location. See the article “Corrosion in Pressurized Water Reactors” in this Volume. More
Image
Published: 01 January 2006
Fig. 18 An example of severe intergranular attack/intergranular stress-corrosion cracking (IGA/IGSCC) at a tube support location. Source: Ref 80 More
Image
Published: 01 January 2006
Fig. 7 Stress dependence of intergranular stress-corrosion cracking of a furnace-sensitized type 304 stainless steel in 288 °C (550 °F) water with 0.2 ppm oxygen. Source: Ref 19 More
Image
Published: 01 January 2006
Fig. 12 Equivalent stress for intergranular stress-corrosion cracking (IGSCC) on an electropolished surface as a function of applied stress and thickness of a cold-worked layer on a cold-worked surface. Source: Ref 43 More
Image
Published: 01 January 2002
Fig. 47 Longitudinal crack and intergranular stress-corrosion cracks in copper air-conditioning absorber tubes. (a) Longitudinal crack in one of the subject absorber tubes. 0.75×. (b) Macrograph of fine, irregular crack observed on the outer surface of the second absorber tube after light acid More
Image
Published: 01 January 2006
Fig. 3 Observed evolution of intergranular stress-corrosion crack in sensitized stainless steel (SS) compact tension (CT) specimen with single dominant crack being created at ∼50 μm depth. Source: Ref 37 More
Image
Published: 01 January 2006
Fig. 13 Location of intergranular stress-corrosion cracking (IGSCC) in heat-affected zone (HAZ) of type 304 pipe. OD, outside diameter; ID, inside diameter. Source: Ref 19 More
Image
Published: 01 January 2006
Fig. 14 Pipe test results showing intergranular stress-corrosion cracking in a 400 mm (16 in.) type 304 pipe heat-affected zone. Source: Ref 19 More
Image
Published: 01 January 2006
Fig. 33 Weld overlay intergranular stress-corrosion cracking (IGSCC) mitigation technique. ID, inside diameter; OD, outside diameter More
Image
Published: 01 January 2006
Fig. 10 Results of Monte Carlo simulations of intergranular stress-corrosion cracking (IGSCC) in upper head penetrations of 1300 MW French PWRs and comparison with inspection results for each class of Alloy 600. Source: Ref 42 More
Image
Published: 01 January 2006
Fig. 16 Secondary side intergranular stress-corrosion cracking (IGSCC) in Alloy 600. Source: Ref 15 More
Image
Published: 01 January 2006
Fig. 24 Effect of yield strength on intergranular stress-corrosion cracking (IGSCC). (a) Crack growth rate of cold-worked, unirradiated 300-series stainless steels (SS) tested in 288 °C (550 °F) simulated BWR water. Source: Ref 131 . (b) IGSCC percentage in slow strain rate tests on 300 More
Image
Published: 01 January 2006
Fig. 27 Intergranular stress-corrosion cracking susceptibility as measured by percentage of intergranular cracking in slow strain rate tests as a function of nickel equivalent (Ni Eq ) determined using data from Kodama et al. ( Ref 140 ) More
Image
Published: 01 January 1997
Fig. 46 Theoretical and observed intergranular stress corrosion crackdepth vs. operational-time relationships for 28 in. diameter schedule 80 type 304 stainless steel piping for two boiling-water reactors operating at different mean coolant conductivities. Note the bracketing of the maximum More
Image
Published: 01 January 2003
Fig. 5 Micrograph showing tight intergranular stress-corrosion cracking originating at the inside surface of a pipe. ID, inside diameter. Source: Ref 10 More
Image
Published: 01 January 2003
Fig. 6 Scanning electron micrograph showing intergranular stress-corrosion cracking (A) and initiation sites for pitting (B) on the inside surface of a pipe. Source: Ref 10 More
Image
Published: 01 August 2018
Fig. 16 Longitudinal crack and intergranular stress-corrosion cracks in copper air-conditioning absorber tubes. (a) Longitudinal crack in one of the absorber tubes. Original magnification: 0.75×. (b) Macrograph of fine, irregular crack on the outer surface of the second absorber tube after More
Image
Published: 01 December 1998
Fig. 5 Fracture caused by a portion of an old intergranular stress-corrosion crack that was not removed in reworking. Part was made of 4340 steel, heat treated to a tensile strength of 1790 to 1930 MPa (260 to 280 ksi). (a) and (b) Remains of an old crack along the edge of the surface More
Image
Published: 15 January 2021
Fig. 19 Micrograph of an intergranular stress-corrosion crack (arrows) that partially penetrated the weld. The crack was filled with oxide. More
Image
Published: 15 January 2021
Fig. 21 Micrograph of intergranular stress-corrosion cracking (arrows) that originated at the inside-diameter (ID) surface of a pipe in lean amine service More