Reinforced polymers (RPs) are widely used in structural, industrial, automotive, and engineering applications due to their ecofriendly nature and the potential to manipulate their properties. This article addresses the technical synthesis of RPs, referring to their tribological behavior, to provide insights into the contribution and interaction of influential parameters on the wear behavior of polymers. It provides a brief discussion on the effects of significant parameters on RP tribology. The article describes abrasive and adhesive wear and provides a theoretical synthesis of the literature regarding the wear mechanisms of RPs. It also describes the synthesis of abrasive wear failure of different types of RPs and highlights the contribution of these influential parameters. The article addresses the synthesis of adhesive wear failure of different types of RPs.

This article introduces the principal methodologies and some advanced technologies that are being applied for nondestructive evaluation (NDE) of fiber-reinforced polymer-matrix composites. These include acoustic emission, ultrasonic, eddy-current, computed tomography, electromagnetic acoustic transducer, radiography, thermography, and low-frequency vibration methods. The article also provides information on NDE methods commonly used for metal-matrix composites.

This article describes the various aspects relating to the selection and preparation of ultrathin-section specimens of fiber-reinforced polymeric composites for examination by transmitted light microscopy. It provides information on the contrast-enhancement methods used by transmitted-light microscopy and optimization of microscope conditions. Examples of composite ultrathin sections analyzed using transmitted-light microscopy contrast methods are also presented.

This article reviews the abrasive and adhesive wear failure of several types of reinforced polymers, including particulate-reinforced polymers, short-fiber reinforced polymers (SFRP), continuous unidirectional fiber reinforced polymers (FRP), particulate-filled composites, mixed composites (SFRP and particulate-filled), unidirectional FRP composites, and fabric reinforced composites. Friction and wear performance of the composites, correlation of performance with various materials properties, and studies on wear-of failure mechanisms by scanning electron microscopy are discussed for each of these types.

This article presents a comprehendable and comprehensive physics-based approach for characterizing the strength of fiber-reinforced polymer composites. It begins with background information on the goals and attributes of this method. The article then addresses the characterization of fiber failures in laminates, because these are at the highest strengths that can be attained and, therefore, are usually the design objective. An exception would be if the design goal is to maximize energy absorption, rather than static strength. The discussion proceeds to situations in which the matrix fails first, either by intent, by design error, or because of impact damage. The state of the modeling propagation and arrest of matrix damage follows. Comparisons of this physics-based approach are then made to empirically based failure theories.

This article reviews various rapid prototyping (RP) processes such as stereolithography, powder sintering, hot melt extrusion, sheet lamination, solid ground curing, and three-dimensional printing. It discusses the various material prototypes produced by RP technology. The list of materials includes particulate and fiber-reinforced polymers, ceramic-matrix composites, and metal-matrix composites. The article also provides information on freeform-fabrication techniques for composite part lay-up.

This article presents the basic guidelines considered in designing a composite structure, and the basic definitions of terms that apply to composites. It describes the analysis of a composite laminate based on stress-strain relationships, stress-strain load relationships, general load displacement case, and general load case solution. Factors affecting the composite materials properties and allowables of fiber-reinforced polymers are reviewed. The article discusses the process considerations for mold design, such as master model, metal tooling, composite tooling, and tool care. It explains the resin selection in designing the composite for use in a particular application. The article illustrates the various methods that are used to process a composite component, namely, wet lay-up, autoclave, resin transfer molding, and vacuum-assisted resin transfer molding. It provides a discussion on electromagnetic interference shielding, electrostatic discharge protection, metal plating, fire resistance, and corrosion resistance on composite materials.

This article introduces the principal methodologies and some technologies that are being applied for nondestructive evaluation of composite materials. These include ultrasonic testing (UT), air-coupled UT, laser UT, ultrasonic spectroscopy, leaky lamb wave method, acousto-ultrasonics, radiography, X-ray computed tomography, thermography, low-frequency vibration methods, acoustic emission, eddy current testing, optical holography, and shearography. The article presents some examples are for fiber-reinforced polymer-matrix composites. Many of the techniques have general applicability to other types of composites such as metal-matrix composites and ceramic-matrix composites.

This article provides information on the potential applications of fiber-reinforced polymer (FRP) composites for maritime craft and offshore drilling platforms. The key benefits gained from using FRP materials together with an examination of the drawbacks and major issues impeding the more widespread use of composites in marine structures are presented.

Compression molding is the single largest primary manufacturing process used for automotive composite applications. This article provides an overview of the compression molding process. It describes the basic design, materials, and processing equipment of three main groups of composite materials, namely, glass-fiber-mat-reinforced thermoplastics, long-fiber-reinforced thermoplastics, and sheet molding compounds. The article also presents information on the application examples and market volume of compression molding.

Rehabilitation is the process of repairing or modifying reinforced concrete structures to a desired useful condition. This article describes the operational steps for the structural assessment of reinforced concrete structures. It discusses the classification of composite materials reinforcing systems for strengthening reinforced concrete structures, such as shop-manufactured and field-manufactured structures. The article reviews the materials property requirements for designing reinforcing systems to strengthen the reinforced concrete structures. It discusses the fiber-reinforced polymer (FRP)-reinforced concrete behavior that depends on flexural, shear, or axial failures. Surface preparation procedures for rehabilitation techniques of reinforced concrete structures using bonded FRP materials are also discussed. The article provides information on the applications of rehabilitation of concrete structures. It explains data recording and acceptance criteria for rehabilitation of concrete structures with composite materials.

This article provides a discussion on the mechanical properties of metals, ceramics, and polymers and fiber-reinforced polymer composites at low temperatures. It reviews the factors to be considered in tensile and compression testing of these materials. The article details the equipment used for low-temperature tensile and compression tests with illustrations. It concludes with a discussion on the various test methods and their ASTM standard for compression and tension testing.