This article is concerned with gear tooth failures influenced by friction, lubrication, and wear, and especially those failure modes that occur in wind-turbine components. It provides a detailed discussion on wear (including adhesion, abrasion, polishing, fretting, and electrical discharge), scuffing, and Hertzian fatigue (including macropitting and micropitting). Details for obtaining high lubricant specific film thickness are presented. The article describes the selection criteria for lubricants, such as oil, grease, adhesive open gear lubricant, and solid lubricants. It discusses the applications of oil and gear lubricants and the types of standardized gear tests. The article presents some recommendations for selecting lubricants and lubricant viscosity for enclosed gear. It provides some examples of failure modes that commonly occur on gears and bearings in wind turbine gearboxes.

Strategies for the lubrication of mechanical systems operating in extreme environments must exclude the liquid lubricants and greases and rely on alternative methods of lubrication, such as gases and solids. This article provides a survey of some of the more effective alternative methods of lubrication. It provides a discussion on the solid materials that have been most commonly used as lubricants: carbon-base materials, transition metal dichalcogenides, polymers, and soft metals.

This article provides a brief introduction to lubrication as a method to reduce friction between two surfaces. It discusses the surface characteristics of parts and explores how lubrication helps separate two contacting surfaces and thereby decreases the coefficient of friction. The article details the classifications of lubrication regimes, namely, boundary, mixed, hydrodynamic, and elastohydrodynamic lubrications. It discusses the various types of lubricant materials and additives, including liquid lubricants, solid lubricants, gaseous lubricants, greases, green lubricants, and nanomaterials. The article also reviews the properties of lubricants. It describes the tribological evaluation of lubricants, including stribeck test, four-ball test, block-on-ring test, pin-in-vee test, and reciprocating motion test.

This article discusses the functions of lubricants to prevent premature failure of rolling element bearings and the advantages of fluid lubrication. It describes the composition of refined mineral oil for rolling bearing applications. The article reviews the types and properties of nonpetroleum oils, such as polyglycols, phosphate esters, silicone fluids, dibasic acid esters, and fluorinated polyethers. It discusses the properties of greases, including grease speed limits, grease composition, relubrication intervals, corrosion prevention behavior, and grease compatibility. The article concludes with a discussion on polymeric lubricants and solid lubricants.

Drawing is a process by which a workpiece is pulled against a die to produce a wire, bar, or tube with smaller cross sectional area compared with the initial stock. This article discusses the variables that affect the drawing process and the parameters that influence friction, lubrication, and wear. These parameters include process, lubricant, workpiece, and tooling. The article provides information on dry and wet lubrication in wire drawing. The dry lubrication refers to use of solid lubricants while wet lubrication refers to the practice of providing a liquid lubricant to the workpiece-die interface. The article describes the most common types and causes of die wear: abrasive wear, adhesive wear, surface fatigue wear, thermal fatigue wear, and catastrophic failure. It concludes with a discussion on the surface treatment and texturing that are used to reduce die wear in drawing operations.

The function of lubricants is to control friction and wear in a lubricating system containing machine elements such as gears and bearings. This article discusses the basic properties of lubricants to help scientists and engineers understand the principles behind lubricant selection. It reviews the functions of additives, such as friction modifiers, antiwear additives, viscosity modifiers, corrosion inhibitors, oxidation inhibitors, dispersants, and detergents. The article discusses the physical properties of liquid lubricants and the performance characteristics of lubricants. It describes the most common lubricant categories and provides information on the health and safety aspects of using liquid lubricants. The article concludes with a discussion on the lubricant-application method that plays a vital role in how the lubricant functions.

This article focuses on the various coatings used on Department of Defense (DoD) systems. These include electroplated coatings; conversion coatings; supplemental oils, waxes, and lubricants; organic paint coatings; and other finishes such as vacuum deposits, mechanical plating, thermal spray coatings, and hot-dip coatings. The article also lists the test requirements and time to failure of the coatings.