A cylindrical specimen compressed with friction at the die surfaces does not remain cylindrical in shape but becomes bulged or barreled. Tensile stresses associated with the bulging surface make the upset test a candidate for workability testing. This article discusses test-specimen geometry and friction conditions; strain measurements; crack detection; and material inhomogeneities, which are to be considered for performing cold upset testing. It describes test characteristics in terms of deformation, free-surface strains, and stress states for performing cylindrical compression tests. The article illustrates the fracture loci in cylindrical, tapered, and flanged upset-test specimens of aluminum alloy and type 1045 cold-finished steel.

This article begins with an overview of the various aspects of infrared pulse thermography used to detect disbondments, delaminations, and generalized corrosion. It describes the distinctive phases of the pulse thermographic process and the key components that are required to perform active thermography. The components include an excitation source, a thermographic camera, and a computer with software that controls the instrumentation, acquires data, and displays the results. The article discusses the process and experimental setup of sonic thermography used for crack detection.

This article provides the general mechanical testing guidelines for the characterization of lamina and laminate properties. Guidelines are provided for tensile property, compressive property, shear property, flexure property, fracture toughness, and fatigue property test methods. The article also tabulates selected standards for lamina and laminate mechanical testing.

This article discusses the J-integral-based single and multiple specimen techniques of the ASTM E 1737 test method for determining plane strain fracture toughness of polymeric materials. It describes the fracture toughness testing of thin sheets and films. The article concludes with information on the alternative methods for determining the fracture toughness of polymer materials.

This article introduces the concepts of linear-elastic fracture mechanics (LEFM) and elastic-plastic fracture mechanics (EPFM). It reviews the fracture mechanics of ceramics and ceramic matrix composites (CMCs). The article describes some fracture toughness measurement techniques used on ceramics and CMCs: single edge notch bending, compact tension, double cantilever beam testing, chevron notch methods, and double torsion. It presents descriptions organized by their specimen types, and includes the advantages and disadvantages, as well as the experimental control schemes employed for each specimen type.

Catastrophic failure best typifies the characteristic behavior of brittle solids in the presence of cracks or crack-like flaws under ambient conditions. This article provides a description of the concepts of fracture mechanics of brittle solids and focuses on the various testing methods developed to characterize the fracture behavior of brittle solids with examples. These include the fracture toughness test method and R-curve test method at ambient and elevated temperatures. The article also includes information on the evaluation of fracture-toughness test results and the behavior of R-curve.

Fracture toughness is an empirical material property that is determined by one or more of a number of standard fracture toughness test methods. This article describes the fracture toughness test methods in a chronological outline, beginning with the methods that use the linear-elastic parameter. After this, the methods that use the nonlinear parameters are discussed. The article reviews some of the work in progress to update the standard test methods, namely, common fracture toughness test method and transition fracture toughness test method. Finally, an overview of fracture toughness testing for ceramic and polymer materials is provided.

This article discusses the conditions for collapse in center-cracked panels and describes the energy criterion for fracture. Measurement of toughness of any material by means of tensile and crack test is discussed. The procedures to be followed for linear elastic fracture mechanics cases are reviewed, along with elastic-plastic fracture mechanics and plastic fracture mechanics procedures with the aid of residual strength diagram. The article also explains the geometry factors needed to determine the toughness of materials.

This article describes the fracture toughness behavior of austenitic stainless steels and their welds at ambient, elevated, and cryogenic temperatures. Minimum expected toughness values are provided for use in fracture mechanics evaluations. The article explains the effect of crack orientation, strain rate, thermal aging, and neutron irradiation on base metal and weld toughness. It discusses the effect of cold-work-induced strengthening on fracture toughness. The article examines the fracture toughness behavior of aged base metal and welding-induced heat-affected zones. It concludes with a discussion on the Charpy energy correlations for aged stainless steels.

This article describes the test methods of fracture toughness, namely, linear-elastic and nonlinear fracture toughness testing methods. Linear-elastic fracture toughness testing includes slow and rapid loading, crack initiation, and crack arrest method. Nonlinear testing comprises J IC testing, J-R curve evaluation, and crack tip opening displacement (CTOD) method. Other methods used include the combined J standard method, the common fracture toughness test, transition fracture toughness testing, and the weldment fracture testing method.