The horsepower requirements to cut various metal alloys provide an indication of the relative ease and cost of machining, but several other important factors include cutting tool material, chip formation, cutting fluids, cutting tool wear, surface roughness, and surface integrity. This article reviews these general machining factors as well as specific cutting tool and cutting parameters for the six basic chip-forming processes of turning, shaping, milling, drilling, sawing, and broaching. Best practices for each of the six chip-forming processes are suggested for optimized machining of aluminum alloys. The article lists the inherent disadvantages of machining processes that involve compression/shear chip formation. It discusses the machining of aluminum metal-matrix composites and nontraditional machining of aluminum, such as abrasive jet, waterjet, electrodischarge, plasma arc, electrochemical, and chemical machining.

Machining tribology poses a significant challenge due to the multiple parameters that must be simultaneously considered to arrive at a cost-minimized solution in production. This article provides information required to make informed decisions about machining parameters. It describes the relationships between machining parameters, workpiece material properties, cutting forces, and the corresponding temperature field in the chip. The article provides information on tool life, with an empirical model, common wear features, and the relationship between tool life and machining cost. The cutting fluids and their effect on tool life are also discussed. The article discusses machining process dynamics and corresponding vibrations. It contains a table that provides a summary of high-pressure coolant research.

Cutting fluids play a major role in increasing productivity and reducing costs by making possible the use of higher cutting speeds, higher feed rates, and greater depths of cut. After listing the functions of cutting fluids, this article then covers the major types, characteristics, advantages and limitations of cutting and grinding fluids, such as cutting oils, water-miscible fluids, gaseous fluids, pastes, and solid lubricants along with their subtypes. It discusses the factors considered during the selection of cutting fluid, focusing on machinability (or grindability) of the material, compatibility (metallurgical, chemical, and human), and acceptability (fluid properties, reliability, and stability). The article also describes various application methods of cutting fluids and precautions that should be observed by the operator.

This article is a comprehensive collection of machining data, presented in tables, covering most of the commonly used machining operations including turning, face milling, end milling (peripheral), drilling, reaming, and tapping of several materials. It provides starting recommendations for the range of speeds and feeds for various machining operations, parameters for the selection of tool geometry, and guidelines on the selection and identification of cutting fluids.

This article describes the basic attributes of the most widely used metal surface cleaning processes to remove pigmented drawing compounds, unpigmented oil and grease, chips, cutting fluids, polishing and buffing compounds, rust and scale from steel parts, and residues and lapping compounds from magnetic particle and fluorescent penetrant inspection. The cleaning processes include emulsion cleaning, electrolytic alkaline cleaning, acid cleaning, solvent cleaning, vapor degreasing, alkaline cleaning, ultrasonic cleaning, and glass bead cleaning. The article provides guidelines for choosing an appropriate process for particular applications and discusses eight well-known methods for determining the degree of cleanliness of the work surface.

Nickel-base alloys can be machined by techniques that are used for iron-base alloys. This article discusses the effects of distortion and microstructure on the machinability of nickel alloys. It tabulates the classification of nickel alloys based on machining characteristics. The article describes the machining operations performed on nickel alloys, such as turning, planing and shaping, broaching, reaming, drilling, tapping and threading, milling, sawing, and grinding. It provides information on the cutting fluids used in the machining of nickel alloys. The article also analyzes nontraditional machining methods that are suitable for shaping high-temperature, high-strength nickel alloys. These include electrochemical machining, electron beam machining, and laser beam machining.

This article discusses the properties of beryllium metals that require special attention when machining. It provides information on the considerations of S65 and selects 65 beryllium materials that are used for conducting tool wear studies and surface damage studies. The article highlights some of the precautions to be followed while machining beryllium metals. Information on the cutting oils, cutting tools, and speeds and feeds used in turning the beryllium are also provided. The article describes the chemical milling and photochemical machining methods that are used for etching beryllium components.

This article discusses the types and operations of the most common machines used for die threading. The construction, types, and comparison of solid and self-opening dies are discussed. The article explains the modification of chasers for threading Monel shaft. The principal factors that influence thread quality, production rate, and cost in die threading are composition and hardness of work metal; accuracy and finish; thread size; obstacles, such as shoulders or steps; speed; lead control; and cutting fluid. The article examines these factors and describes the tools and cutting fluids used for pipe threading along with the severity of stop lines.

This article focuses on machines that are designed, constructed, and used for drilling. It provides information on the design, materials, selection, and classification of drill. The article describes drills that are specially designed for hard steel and other specific applications. A variety of drill point styles, such as single-angle points and reduced-rake points, are described. The article discusses the factors considered to obtain expected dimensional accuracy of holes. It explains the determination of the optimum speed and feed for drilling, which depends on the workpiece material, tool material, depth of hole, design of drill, rigidity of setup, tolerance, and cutting fluid. The article illustrates the effects of operating variables on drill life of hardened steel. The advantages, limitations, design considerations, insert configurations, and applications of indexable-insert drills are discussed. The article concludes with a discussion on the requirements to drill small holes that differ from those used in conventional drilling.

Metal is removed from the workpiece by the mechanical action of irregularly shaped abrasive grains in all grinding operations. This article discusses three primary components of grinding wheels, namely, abrasive (the cutting tool), bond (the tool holder), and porosity or air for chip clearance and/or the introduction of coolant. It describes the compositions and applications of coated abrasives and types of grinding fluids, such as petroleum-base and mineral-base cutting oils, water-soluble oils, synthetic fluids, semisynthetic fluids, and water plus additives. The article concludes with information on different types of grinding processes, namely, rough grinding, precision grinding, surface grinding, cylindrical grinding, centerless grinding, internal grinding, and tool grinding.

This article discusses the functions and chemistry of metal cutting or grinding fluids. It reviews the choice of cutting or grinding fluids that is influenced by the workpiece material, fluid characteristics, and machining operation. The article describes two application methods of cutting or grinding fluids: flooding and misting. It discusses and lists the American Society for Testing and Materials standard test procedures used in establishing control of cutting and grinding fluids. The article provides information on the storage, distribution, cleaning, and disposal of cutting and grinding fluids. It concludes with information on the health implications and biology of cutting fluids.

This article provides a discussion on cutting tools, their materials and design; cutting fluids; and various aspects of machining operations of heat-resistant alloys, with several examples. Operations such as turning, planing and shaping, broaching, drilling, reaming, counterboring and spotfacing, tapping and thread milling, milling, sawing, and grinding are discussed. Nominal compositions of wrought heat-resistant alloys and nickel-base heat-resistant casting alloys, as well as compositions of cobalt-base heat-resistant casting, iron-base heat-resistant casting, and mechanically alloyed (oxide dispersion strengthened) products are also listed.

Reaming is a machining operation in which a rotary tool takes a light cut to improve the accuracy of the round hole and reduce the roughness of the hole surface. This article describes its process capabilities and provides information on workpiece material and hardness, as well as the machines used. Reamer materials and design, speed and feed, bushings and fixtures, and cutting fluids used are also discussed. The article outlines the factors to be considered while selecting a reamer. It also discusses the applications of the principle types of reamers, namely, straight-flute chucking, spiral-flute chucking, adjustable, end-cutting, shell, floating-blade, gun, and special-purpose reamers, with examples.

Tapping is a machining process for producing internal threads. This article provides a discussion on machines and accessories of tapping. It reviews the seven categories of taps, namely, solid, shell, sectional, expansion, inserted-chaser, adjustable, and collapsible taps, as well as their design and functions. It explains the influences of various factors on the selection of tap design features and discusses the principal factors that influence the selection of equipment and procedure for tapping. The article reviews the factors that determine torque demand. It also provides an overview of tap materials and surface treatment and concludes with a discussion on tapping of taper pipe threads.

Turning is a machining process for generating external surfaces of revolution by the action of a cutting tool on a rotating workpiece, usually in a lathe. This article discusses the process capabilities of turning over other machining operations and describes the classification, controlling methods, attachments, and accessories of a lathe machine. It reviews the design and various operations of single-point cutting tools in turning. In addition, the article discusses the influence of various factors on selection of equipment and machining procedure for a specific part. These include the size and configuration of the workpiece, equipment capacity, production quantity, dimensional accuracy, number of operations, and the surface finish. It presents examples that describe or compare equipment and techniques for production applications. Finally, the article provides a discussion on the classification and compatibility of cutting fluids.

This article provides information on the operating principle, tool material and design changes, and safety and protection of various multifunction machines as well as the cutting fluids used. These include single-spindle automatic lathes, manual turret lathes, single-spindle automatic bar and chucking machines, Swiss-type automatic bar machines, multiple-spindle automatic bar and chucking machines, and multiple-spindle vertical chucking machines. The article provides examples that illustrate typical variations in dimensions obtained with a multiple-spindle machine. It also describes the machinability and provides information on the physical condition of the work metal. The article discusses the various factors to be considered in the selection of an appropriate machine. It presents examples that describe the techniques and equipment selected for specific production applications. In addition, the article discusses the types, applications, advantages, and disadvantages of machining centers and transfer machines. Finally, it provides the goals, objectives, and production techniques of flexible manufacturing systems.

Sawing is the process of cutting a workpiece with power band saws, hacksaws, and circular saws. This article discusses the process capabilities and limitations of band sawing. It provides information on band sawing machines, their fixtures and attachments, band construction and materials, blade design, and cutting fluids associated with the band sawing process. The article also discusses the variables considered in band saw machining. In addition, it presents examples representing the comparison of contour band sawing with milling and shaping in various applications. The article concludes with a discussion on the safety precautions to be followed during band sawing and on friction band sawing, circular sawing, and hacksawing.

Boring is a machining process in which internal diameters are generated in true relation to the centerline of the spindle by means of single-point cutting tools. This article provides a discussion on boring machines and boring tools and presents a comprehensive discussion on the various elements of boring. The elements are composition and hardness of workpiece metal, cutting fluid, speeds and feeds, and methods for piloting and supporting tools in boring applications. The article explains the role of workpiece size in selecting the equipment and processing procedure and the use of techniques to overcome difficulties presented by workpiece configuration. It describes the factors related to accuracy of boring and factors affecting them. The article also presents a discussion on close-tolerance boring and methods of controlling vibration and chatter. It concludes with a section presenting information on the use of boring equipment for machining operations other than boring.

This article begins with a discussion on the classification of aluminum alloys and the selection of alloy and temper based on machinability. It provides an overview of cutting force and power, tool design and material, and general machining conditions. In addition, the article discusses distortion and dimensional variation and machining problems during the machining of high-silicon aluminum alloy. It also provides information on tool design and material, speed and feed, and the cutting fluid used for various machining processes, namely, turning, boring, planing and shaping, broaching, reaming, tapping, milling, sawing, grinding, honing, and lapping. The article concludes with a discussion on drilling operations in automatic bar and chucking machines and drill presses.

This article begins with a discussion on machinability ratings of copper and copper alloys and then describes the factors influencing the machinability ratings. It explains the effect of alloying elements, cold working, and cutting fluid on the machinability of copper and copper alloys. In addition, the article provides a comprehensive discussion on various machining techniques that are employed for machining of copper and copper alloys: turning, planing, drilling, reaming, tapping and threading, multiple operation machining, milling, slitting and circular sawing, power band sawing and power hacksawing, grinding, and honing.