High-volume additive manufacturing (AM) for structural automotive applications, along the lines of economically viable technologies such as powder metallurgy, castings, and stampings, remains a lofty goal that must be realized to obtain the well-known advantages of AM. This article presents two key opportunities for AM related to automotive applications, specifically within the realm of metal laser powder-bed fusion: alloys and product designs capable of high throughput. The article also presents the general methodology of alloy development for automotive AM. It provides examples of unique designs for reciprocating components in elevated-temperature applications that are also exposed to demanding tribological conditions. The article also discusses the future of AM for automotive applications.

In addition to failures in shafts, this article discusses failures in connecting rods, which translate rotary motion to linear motion (and conversely), and in piston rods, which translate the action of fluid power to linear motion. It begins by discussing the origins of fracture. Next, the article describes the background information about the shaft used for examination. Then, it focuses on various failures in shafts, namely bending fatigue, torsional fatigue, axial fatigue, contact fatigue, wear, brittle fracture, and ductile fracture. Further, the article discusses the effects of distortion and corrosion on shafts. Finally, it discusses the types of stress raisers and the influence of changes in shaft diameter.

Aluminum alloys are widely used in engineered components because of their excellent strength-to-weight ratio. Their use in applications requiring wear resistance is more limited. One of the main limitations of aluminum alloys is the poor tribological behavior mainly due to their relatively low hardness, which favors large plastic deformation under sliding conditions. This article discusses the classes and mechanisms of wear in aluminum-silicon alloys, aluminum-tin bearing alloys, and aluminum-matrix composites; describes the effect of material-related parameters on wear behavior of these alloys; and reviews their applications in a variety of tribological applications in the automotive industry ranging from aluminum-tin alloys for plain bearings to alloys with hard anodizing for machine elements. Methods to improve wear resistance and alloy hardness are also discussed.

The 206.0, A206.0, and B206.0 alloys (aluminum alloys 2xxx) are structural castings in the heat-treated temper for automotive and aerospace applications where high tensile and yield strengths with moderate elongations are needed. This datasheet provides information on key alloy metallurgy and fabrication characteristics of these 2xxx series alloys, as well as the effects of processing on their typical physical and mechanical properties.

Alloy 6013 is a high-strength Al-Mg-Si-Cu alloy, developed for extruded automotive bumpers. This datasheet provides information on key alloy metallurgy, processing effects on physical, tensile, static and fracture properties, and fabrication characteristics of this 6xxx series alloy.

Aluminum products such as fasteners and automotive components are often produced by cold extrusion because it facilitates high volume production of near-net-shape parts. This article describes the cold extrusion process for aluminum alloys and the associated requirements for tooling, dies, punches, and other equipment. It covers typical tool materials and their working properties, and provides best practices for sizing aluminum slugs and preparing them for use. The article also discusses the wide range of achievable shapes from shallow cup-like extrusions to deep cups and complex parts with longitudinal flutes, stems, and grooves.

This article presents a brief discussion on the main applications for low- and high-viscosity polyalphaolefins (PAOs) and highlights key areas of interest and shows why PAOs are used in these applications. It discusses the physical properties of passenger car motor oils (PCMOs) based on or containing PAOs. The properties include Noack volatility and pour point. The article also discusses the properties and applications of heavy-duty engine oil (HDEO), industrial lubricants, food-grade lubricants, greases, transportation gear oils, compressor oils, hydraulic fluids, and transmission fluids.

This article focuses on friction and wear of automotive and aircraft brakes. It provides a comparison of friction and wear behaviors, frictional characteristics, and frictional performance of the friction materials. The article describes the components of brake friction materials and the classifications of brake lining materials. It discusses the effect of formulation compositions and manufacturing processes and the effect of braking operation conditions. The article provides information on aircraft brake linings, which operate under a wide range of kinetic energy conditions. The morphology effect of graphite on automotive brake drum and disk is explained. The article also describes the characteristics of specific wear rates for both normal and local cast iron in automotive brake drums and disk rotors. It provides information on noises, vibrations, and harshness caused by brake pads. The article concludes with information on physical and chemical testing of brakes and toxicity of brake formulation and regulations.

Cast irons have been widely used by engineers in applications that require low cost, excellent castability, good damping capacity, ease of machining, and wear resistance. This article discusses the classification of wear for cast irons: adhesive wear, abrasive wear, and erosive wear. Typical wear applications for a variety of cast iron grades are listed in a table. The article reviews the general wear characteristics of gray irons, compacted graphite (CG) irons, and ductile irons. It discusses the typical compositions and properties of white and chilled iron castings. Gray cast iron is the dominant material for both brake drums and disk brake rotors. The article reviews brake lining chemistry effects, graphite morphology effects, and external abrasive effects on brake drums. It concludes with information on cast iron grinding balls.

This article addresses the impact of emerging technologies on future lubricant and tribology requirements. The connection between lubricant and tribological requirements is shown by briefly describing basic lubrication and friction processes in major engine components incorporating emerging technologies. The article introduces automotive lubricant development activities and the foundation of future automotive engine-lubricant trends. It discusses how emerging powertrain technology impacts future automotive lubricant and technology requirements, focusing on the effects of engine oils and additives on engine performance to meet powertrain performance requirements. A detailed overview of automotive engine oil performance evaluation methods and specifications, and their impact on the types of advanced lubricants being developed as well as future automotive engine testing requirements, is provided.

Through detection of the wear, risk assessment can be performed, along with a related time to failure estimation through technologies such as electrical signature analysis (ESA) and motor current signature analysis. This article discusses the principle of operation of data collectors for ESA measurements and illustrates the evaluation of broken rotor bars and a broken shaft. It describes the detection of faults in bearings using ESA and provides information on the investigation of gearboxes and related components in a wind generator.

This article focuses on friction, lubrication, and wear of internal combustion engine parts, improvements in which provide important gains in energy efficiency, performance, and longevity of the internal combustion (IC) engine systems. It discusses the types, component materials, and Friction and Wear Control of IC engine. The article explains the process of friction reduction by surface textures or coatings. It provides information on surface hardening of iron and steel, which is commonly employed for engine and powertrain components such as crankshafts, cams, and cylinder liners. The article also discusses advanced surface engineering technologies, such as diamondlike carbon coatings and surface texture technology. Information on thermal-spray methods that have led to improvements in engine components is also provided. The article describes IC engine-components wear, namely, piston assembly wear, valvetrain wear, cylinder-bore wear, and engine bearing wear. It concludes with information on inlet valve and seat wear of IC engine.

This article presents typical wear applications for a variety of cast iron grades in a table. In general, wear is classified according to three major types: adhesive (frictional) wear (sliding and rolling) caused by contact of one metallic surface with another; abrasive wear caused by contact with metallic (shots, swarf) or nonmetallic abrasive materials; and erosive wear. The article discusses general wear characteristics of gray iron, compacted gray iron, and ductile iron. It provides information on the brake lining chemistry effects, graphite morphology effects, normal cast iron wear, local cast iron wear, and external abrasive effects on brake drums and disk brake rotors made of gray cast iron. The article concludes with a discussion on the application of cast iron for grinding balls.

This article focuses on technologies in the protective coatings field, namely, polysiloxane hybrids and related materials. Industrial maintenance topcoats, including silicone alkyds, silicone epoxies, and polysiloxanes are reviewed. The article discusses two major application areas of protective coatings, namely, architectural coatings and automotive clear coats.

This article provides a discussion on polyester coating applications such as powder coatings, can coatings, and automotive paints. It includes an overview, structure, properties, and benefits of vinyl ester resins. The article discusses the additives for both unsaturated polyester and vinyl ester coatings, namely, curing systems, thixotropic agents and fillers. It exemplifies polyester and vinyl ester coating, lining and flooring systems that are used for top-to-bottom protection of industrial plants and equipment. The article also highlights the concerns to be addressed when using polyesters and vinyl esters.

This article describes the physical properties of powder metallurgy (PM) stainless steels. These include thermal diffusivity, conductivity, thermal expansion coefficient, Poisson's ratio, and elastic modulus. The article contains a table that lists the characteristics of various grades of PM stainless steels. It discusses the applications of various PM stainless steels such as rearview mirror brackets, anti-lock brake system sensor rings, and automotive exhaust flanges and sensor bosses.

Metal injection molding (MIM) is a metalworking technology that has its origins as a commercial technology only dating back to the early 1970s. This article explores why the MIM is the preferred solution for many fabricated components. It illustrates the MIM components required for different end-use markets such as electronics and telecommunications, medical, automotive, power hand tools, industries, and firearms.

This article focuses on the frequently encountered causes of induction coil failures and typical failure modes in fabrication of hardening inductors, tooth-by-tooth gear-hardening inductors, clamshell inductors, contactless inductors, split-return inductors, butterfly inductors, and inductors for heating internal surfaces. It discusses the current density distribution and the skin effect, the proximity effect, and crack-propagation specifics. The article also describes selected properties of copper alloys, the electromagnetic edge effect of coil copper turn, and the effect of magnetic flux concentrators on coil life. It also reviews the importance of having appropriate and reliable electrical contacts.

Induction heat treatment is a common method for hardening and tempering of crankshafts, which are necessary components in almost every internal combustion engine for cars, trucks, and machinery, as well as pumps, compressors, and other devices. Similar to crankshafts, camshafts also belong to the same group of the critical engine/powertrain components. This article focuses on induction technologies used for surface hardening and tempering of automotive crankshafts, and provides general information on U-shaped inductors with crankshaft rotation and clamshell or split inductors without crankshaft rotation and their pros and cons. It also describes the effect of post-heat-treatment processes in crankshafts. The article concludes with a discussion on induction hardening of camshafts that focuses on those used in automobiles and truck engines.

Induction heat treating is used in the off-road machinery industry for hardening steel and cast iron components used in a wide range of applications. This article focuses on the usage of induction hardening components in the industry, and discusses the basic requirements of steel and cast iron to undergo induction hardening. It provides a comparison on single-shot and scan hardening methods to select the suitable one for induction heat treating of gears and sprockets. The article describes the effect of microstructure, residual stress, and workpiece position on induction hardening. It concludes with a discussion on the important factors to be considered during the installation of off-road machinery components.