A detailed fracture mechanics evaluation is the most accurate and reliable prediction of process equipment susceptibility to brittle fracture. This article provides an overview and discussion on brittle fracture. The discussion covers the reasons to evaluate brittle fracture, provides a brief summary of historical failures that were found to be a result of brittle fracture, and describes key components that drive susceptibility to a brittle fracture failure, namely stress, material toughness, and cracklike defect. It also presents industry codes and standards that assess susceptibility to brittle fracture. Additionally, a series of case study examples are presented that demonstrate assessment procedures used to mitigate the risk of brittle fracture in process equipment.

This article describes some of the welding discontinuities and flaws characterized by nondestructive examinations. It focuses on nondestructive inspection methods used in the welding industry. The sources of weld discontinuities and defects as they relate to service failures or rejection in new construction inspection are also discussed. The article discusses the types of base metal cracks and metallurgical weld cracking. The article discusses the processes involved in the analysis of in-service weld failures. It briefly reviews the general types of process-related discontinuities of arc welds. Mechanical and environmental failure origins related to other types of welding processes are also described. The article explains the cause and effects of process-related discontinuities including weld porosity, inclusions, incomplete fusion, and incomplete penetration. Different fitness-for-service assessment methodologies for calculating allowable or critical flaw sizes are also discussed.

This article discusses the classification of wear based on the presence or absence of effective lubricants, namely, lubricated and nonlubricated wear. Variations in ambient temperature, atmosphere, load, and sliding speed, as well as variations in material bulk composition, microstructure, surface treatment, and surface finish of steel are also considered. The article discusses the types, wear testing, wear evaluation, and hardness evaluation of abrasive wear. It describes the selection criteria of steels for wear resistance. The article also describes the importance of hardness and microstructure as factors in resistance to wear. It provides a discussion on the resistance of various materials to wear in specific applications. The wear resistance of austenitic manganese steels is also discussed. The article discusses the applications of phosphate coatings, wear-resistant coatings, and ion implantation. It concludes with information on interaction of wear and corrosion.

Stainless steels are highly alloyed materials in comparison to most other popular powder metallurgy (PM) materials, such as low-alloy steels, copper alloys, and aluminum alloys. This article provides an overview of the history of PM stainless steels.

This article briefly reviews the production methods and characteristics of plain carbon and low-alloy water-atomized iron and steel powders, high-porosity iron powder, carbonyl iron powder, and electrolytic iron powder. It emphasizes on atomized powders, because they are the most widely used materials for ferrous powder metallurgy. The article provides information on the properties and applications of these powders. It also includes an overview of diffusion alloying, basics of admixing, and bonded premixes.

This article summarizes the general classification, mechanical properties, and applications of ferrous powder metallurgy (PM) materials for parts production. It discusses four principal ferrous PM alloy types: admixed elemental alloys, diffusion alloys, prealloys, and hybrid alloys. The article reviews the benefits and disadvantages as well as the effect of processing on the properties and material microstructure of these alloys. It contains tables that list the mechanical properties of various iron-copper and copper steels.

The two most important classes of materials that are manufactured via infiltration methods are copper- and silver-infiltrated refractory metals and refractory carbides, and copper-infiltrated steels. This article focuses on copper-infiltrated steels and discusses the basic requirements for infiltration, which is a technique that is only applicable to material systems that meet certain requirements. It addresses these requirements and describes the conventional (partial) infiltration process of powder metallurgy (PM) steel. The materials used in the process, such as matrix and infiltrant, are discussed. The article also details several criteria used to evaluate the performance of an infiltration process. It concludes with information on alloy steels and fully infiltrated steels.

This article summarizes some of the effects of the major alloying elements in low-alloy steels and the heat treating for some common types of low-alloy steels. Coverage includes common alloys of the following low-alloy steel types: low-alloy manganese steels, low-alloy molybdenum steels, low-alloy chromium-molybdenum steels, low-alloy nickel-chromium-molybdenum steels, low-alloy nickel-molybdenum steels, low-alloy chromium steels, low-alloy chromium-vanadium steels, and low-alloy silicon-manganese steels. The article reviews heat treating parameters and processing considerations for each category of steel, including spherodizing, normalizing, annealing, hardening, and tempering.

Copper steels are precipitation-strengthened steels that are designed to have a unique combination of physical and mechanical properties. This article provides an overview of copper precipitate-strengthened steels and their applications, and discusses appropriate ASTM International standards. It describes the common phases and alloying elements present in copper precipitate-strengthened steels, and reviews the influences of alloying elements on processing, phase diagrams, microstructures, and mechanical properties. The article also discusses the thermomechanical process, solutionizing heat treatment, and isothermal aging in detail. It concludes with a review of the interrelationships between heat treatments, microstructures, and mechanical properties.

This article focuses on heat treating of the most important H-series and low-alloy hot-work tool steels, namely, normalizing, annealing, stress relieving, preheating, austenitizing, quenching, tempering, and surface hardening. It describes the heat-treating procedure for hot-work tools using examples. The article provides information on the North American Die-Casting Association's requirements for steel grades and heat treatment of dies made of hot-work tool steels. It also describes the chemical compositions and mechanical and metallurgical properties of hot-work tool steels.

Hardenable steels with high-alloy content includes a family of nickel-cobalt steels with high strength and high toughness. This article describes various heat treatments, namely, normalizing, annealing, hardening, tempering, stress relieving, overaging, quenching, refrigeration, and straightening treatment, applied to HP9-4-20, HP9-4-25, HP9-4-30, and HP9-4-45 steels. These steels have high fracture toughness when heat treated to very high strength levels. The article also describes heat treatments applied to other alloys such as AF 1410, AerMet 100, AerMet 310, and AerMet 340, which provide a good combination of high strength and toughness that make them attractive for aerospace application. It also presents tables that provide information on the effect of aging temperatures and heat treatment on mechanical properties and impact energy of these steels.

This article provides a detailed discussion on the effect of boron in heat-treated steel and thermomechanically-simulated steel. It describes the boron hardenability mechanism and the effect of composition and heat treatment parameters on boron hardenability. The article examines the hardening behavior of unalloyed boron steel and low-alloyed boron steel in heat treatment experiments by varying the austenitizing temperatures and cooling conditions. It also discusses the applications of boron steels.

This article contains a table that presents information on cross-references to standard SAE carbon and low-alloy steel grades to selected chemically similar steels.

This article is a compilation of tables that present information on cross-referencing of steel designations that are followed in France, Germany, Italy, Japan, Sweden, and Britain to AISI/SAE.

This article is a comprehensive collection of tables that present information on the various thermal properties, namely, the coefficient of linear thermal expansion, thermal conductivity, and specific heat, of carbon and low-alloy steels.

Successful hardening depends on the hardenability of steel composition, the geometry of parts, the quenching system, and on the heat treating process used. This article provides a brief overview of the computation and use of quench factor analysis (QFA) to quantify as-quenched hardness for carbon and low-alloy steels. As a single-value parameter alternative to Grossmann H-values, QFA is a potential method to qualify a quenching medium or process or to effectively monitor variation of quench severity due to either the quenchant or the system. The article describes the procedures for experimentally determining the quench factors by using a type 304 austenitic stainless steel probe. Typical examples of the utilization of QFA for quenchant characterization are provided. The article also describes the methods for experimentally generating time-temperature-property curves.

The use of gases or molten salts as the quenchant for steel parts is commonly limited to the quenching of high-alloy steel or the carbonizing quenching of low-alloy steel. This article reviews the quenching process of steels with molten metals (quenchant) such as molten lead, molten bismuth, and molten sodium. It also contains tables that list the physical properties of lead, bismuth, sodium, and molten sodium.

Hardenability is a composition-dependent property of steel and depends on carbon content and other alloying elements as well as the grain size of the austenite phase. This article provides an overview of a wide range of testing procedures used to determine and quantify hardenability of shallow-hardening, low-carbon, plain carbon, and low-alloy medium-carbon steels ranging from classical fracture and etching, Grossmann hardenability, and Jominy end-quench testing to manual and computerized computational methods. The article then uses this as a backdrop for the implementation of the core concepts of hardenability in a variety of predictive tools for calculating hardenability. The Caterpillar 1E0024 Hardenability Calculator, a personal computer-based program, calculates the Jominy curve based on the steel composition. The article also describes the method for boron and nonboron steels, with calculation examples for 8645 steel and 86B45 steel.

Electroslag welding (ESW) involves high energy input relative to other welding processes, resulting generally in inferior mechanical properties and specifically in lower toughness of the heat-affected zone. Electrogas welding (EGW) is a method of gas metal or flux cored arc welding, wherein an external gas is supplied to shield the arc, and molding shoes are used to confine the molten weld metal for vertical-position welding. This article describes the fundamentals, temperature relations, consumables, metallurgical and chemical reactions, and process development of ESW. The problems, quality control, and process applications of ESW and EGW are also discussed.