This article describes glass fibers derived from silica, alumina, and calcium oxide compositions. The section on general-purpose glass fibers provides an in-depth discussion of melt properties, fiber properties, methods of manufacture, and significant product types. The article discusses special-purpose glass fibers and reviews compositions, manufacture, properties, and applications to an extent commensurate with their commercial use. It addresses the generic glass melting and fiber forming process, including the viscosity-versus-temperature profile required for general-purpose E-glass fibers with and without boron. The article also discusses continuous multiend or single-end roving, woven roving (or noncrimp fabrics), fiberglass mats, chopped strands, and yarns for textile applications.

This article presents fractographs that show evidence of overload and fatigue in gray cast irons. The overload failure section illustrates a fractured motor housing, valve body, and bracket with microvoid coalescence (dimpled rupture) in the metal matrix between graphite flakes. The fractographs of fatigue failures illustrate a gearbox housing with fatigue striations and pearlitic microstructure.

This article describes some of the underlying factors of tool steel and bearing steel fractures and appearances. It also briefly introduces the general types of cold work and hot work tool steels and their typical performance requirements. This includes the importance of microstructural conditions achieved with powder metallurgy (PM) tool steels and the need for steel “cleanliness,” especially in preventing contact fatigue in bearings or bending fatigue in gears.

The role of a mixer/agitator in quenching applications is to control the mixing environment in order to meet the process criteria. This article provides the basic fundamentals of the sizing of agitators, tank geometry importance, and other considerations for the application of agitators in quench tanks. It also discusses the differing methods for the sizing and selection of agitators for quench tank applications.

Computational fluid dynamics (CFD) provides an efficient, alternate, virtual approach for simulating and analyzing quenching processes with an impact on component design, manufacturing process, and quality. This article provides domain insights for quenching researchers and CFD practitioners for the modeling of the industrial quenching process and for supporting the diverse multifunctional needs in an industry, ranging from primary metallurgical companies (steel, aluminum, and other alloys), original equipment manufacturers, engineering companies, captive and commercial heat treating facilities, quench system manufacturers, and quench fluid suppliers. It describes the governing differential equations for the fluid flow and heat-transfer phenomena during quenching. The article also discusses different modeling categories to determine a CFD methodology for quenching.

Hardening and depth of hardening of steel is a critically important material and process design parameter. This article presents a selective overview of experimental and predictive procedures to determine steel hardenability. It also covers the breadth of steel hardenability, ranging from shallow, to very difficult to harden, to air-hardening steels.

This article presents the modes of heat transfer and the stages of cooling during quenching. It provides an overview on the wetting process and then focuses on the evaluation of heat transfer during quenching. It also presents the challenges of thermal process evaluation based on an inverse heat conduction analysis. The article contains a compilation of best practice examples on heat transfer evaluation, which are intended to represent the practical aspects and applicability of the methods aiming the prediction of heat-transfer coefficients.

Flow visualization is an important characterization process to not only understand uniformity of the interfacial cooling mechanisms, but also to characterize the overall impact of agitation on the uniformity of the overall cooling process. This article focuses on thermal flow simulation and visualization in the quenching process. The study presents the effect of bubbling, boiling, and breaking the steam film on the heat-transfer coefficient during the agitated quenching process.

In this article, an in-depth overview of petroleum quenching oils is provided, including oil composition, use, mechanism of the oil quenching processes, oil degradation, toxicology and safety, and quenching bath maintenance.

This article focuses on the quenching properties of vegetable and animal oils, including toxicity and biodegradability of vegetable/animal oils. The article provides a detailed discussion on the oxidation of vegetable/animal oils. The addition of antioxidants to stabilize soybean and palm oils is discussed, and the article concludes that substantially better performance is required if vegetable oils are to be effective functional equivalents to petroleum oil formulations. This may be done by selecting different vegetable oil compositions with less unsaturation, by applying genetic modification of soybean seed oils, or by chemically modifying and stabilizing the vegetable oil structure.

This article details investigations on the characterization of various nanofluids as quenchants for industrial heat treatment. It provides a discussion on the preparation, stability, thermophysical properties, and wetting characteristics of nanofluids. The article explains the mechanism of heat transfer in nanofluids and discusses the effect of the deposition of nanoparticles on the probe surface. The article also presents the microstructure and mechanical properties of steel quenched in nanofluids.

Spray quenching (or jet impingement) is the most common technique employed to improve the uniformity of heat removal and break the vapor layer, allowing for a high cooling rate to be achieved. This article presents the heat transfer characteristics of quenching a hot surface, which can be expressed by the boiling and quench curve. It discusses three major spray parameters that have a substantial role in the quantification of spray cooling performance: droplet size, droplet velocity, and volumetric flux. The article also presents the available models and correlations to predict the cooling rate in spray quenching of hot surfaces during different boiling phases. It then discusses the effect of surface roughness on spray cooling performance.

Gas quenching is one of the standard quenching technologies used in fabricating metallic components. The gas quenching process is usually performed at elevated pressures and is therefore mostly referred to as high-pressure gas quenching (HPGQ). This article presents the physical principles of HPGQ and also presents the equipment for gas quenching. The article describes the three types of gas that are mainly used for HPGQ: nitrogen, helium, and argon. It provides the mathematical model for heat fluxes and temperatures during HPGQ. The article also presents typical industrial applications for HPGQ in addition to equipment process and safety.

Additive manufacturing (AM) offers expansive design freedoms for realizing parts that are more complex and customized than their conventionally fabricated counterparts, but all AM technologies impose restrictions on buildable geometries and features. Design rules capture those restrictions in the form of best practices to successfully design for AM. This article discusses how design rules can potentially support and accelerate the process of developing part geometry for AM. The discussion provides examples of design rules that are independent of any specific AM process and then discusses design rules specific to particular AM processes.

This article provides a detailed discussion on nanoindentation hardness, high-strain-rate behavior and strain-rate sensitivity, and corrosion response of additively manufactured (AM) metals. It summarizes the most commonly used AM alloys for applications in harsh environments and their respective corrosion responses in various service environments. It also provides several case studies on location-dependent properties, microstructural evolution, and indentation strain-rate sensitivity of various additively manufactured alloys.

This article provides readers with a brief review of the applications of thermography in additive manufacturing (AM), which still is largely a research and development (R&D) effort. There is a particular focus on metals-based laser powder-bed fusion (L-PBF), although applications in directed-energy deposition (DED) and electron beam PBF (E-PBF) also are mentioned. The metrological basis of thermography is discussed in the article. Background information on radiation thermometry is provided, including how the various equations are applied. Finally, specific examples and lessons learned from various AM thermographic studies at the National Institute of Standards and Technology (NIST) are provided.

This article briefly introduces the concept of creep properties of additively manufactured (AM) alloys, with a focus on the effects of the characteristic microstructure of AM alloys on creep performance. Relevant postprocessing treatment also is discussed, in relation to improved creep performance based on the improvement of AM initial microstructure.

As additive manufacturing (AM) gains maturity as a manufacturing technique for production in many industrial sectors, inspection as a tool for quality control gains importance. This article is focused on the field of dimensional metrology, which is typically concerned with the verification of size, location, form, and surface topography of geometric features. This is split into two categories: geometric (size, location, form) and surface measurement (topography). The article also focuses on applicable inspection technologies, and it discusses the context within digital thread manufacturing. A case study on the Digital Inspection Requirements Enhancing Coverage and Traceability (DIRECT) is also presented.