Credits
-
Published:2002
Volume Editors
William T. Becker
Roch J. Shipley
Authors and Contributors
Tom Adler
Albany Research Center
Rehan Ahmed
Heriot-Watt University
Debbie Aliya
Aliya Analytical
Stephen D. Antolovich
Washington State University
Roy G. Baggerly
Ray Bayer
William T. Becker
M. Belassel
Proto Manufacturing Limited
Daniel J. Benac
Bryant-Lee Associates
Jayashree Bijwe
Indian Institute of Technology, Delhi
R.R. Blackwood
Tenaxol Inc.
John B. Bowles
University of South Carolina
M.E. Brauss
Proto Manufacturing Limited
Charlie Brooks
University of Tennessee
Mohan D. Chaudhari
Columbus Metallurgical Service
Yan-Ming Chen
CETIM
Ashok Choudhury
Lockheed Martin Energy Research
Scott S. Chumbley
Ames Laboratory
Carl Czajkowski
Brookhaven National Laboratory
Daniel R. Danks
Danks Tribological Services
Daniel P. Dennies
The Boeing Company
Bill Dobson
Binary Egnineering Associates, Inc.
Don Duvall
Engineering Systems Inc.
Rob Dwyer-Joyce
The University of Sheffield
Susan Freeman
Millennium Metallurgy, Ltd.
Arun M. Gokhale
Georgia Institute of Technology
Mark Hadfield
Bournemouth University
Crispin Hales
Triodyne Inc.
Larry D. Hanke
Materials Evaluation and Engineering, Inc.
Jeffrey A. Hawk
Albany Research Center
Thomas R. Jack
NOVA Research and Technology Center
Jeffrey Jansen
Stork Technimet, Inc.
L.M. Jarvis
Tenaxol Inc.
Kent Johnson
Engineering Systems Inc.
Mitchell Kaplan
EAD Aerospace, Inc.
Randy K. Kent
MDE Engineers Inc.
Matthew T. Kiser
Caterpillar Inc.
John Landes
University of Tennessee
Allan D. Lang
Iain Le May
Metallurgical Consulting
Roger Lewis
The University of Sheffield
Cameron Lonsdale
Standard Steel
Russell A. Lund
Charles R. Manning
Accident Reconstruction Analysis Incorporated
William McBrine
Altran Corporation
Robert McCabe
AMC
Steve McDanels
National Aeronautics and Space Administration
Dennis McGarry
FTI-SEA Consulting
Daryll W. McKinley
McSwain Engineering, Inc.
Richard H. McSwain
McSwain Engineering, Inc.
Brett A. Miller
Stork Technimet Corporation
Harry R. Millwater, Jr.
University of Texas at San Antonio
M. Narazaki
Utsunomiya University (Japan)
Howard Nelson
Dana E. Netherton
Athos Corporation
John G. Newman
Physical Electronics Inc.
Ronald J. Parrington
IMR Test Labs
Cheryl Pattin
Triodyne Inc.
Ray Pelaez
CorrTech Inc.
James Pineault
Proto Manufacturing Limited
Robert B. Pond, Jr.
M-Structures Inc.
Gordon Powell
The Ohio State University
Julian J. Raphael
Columbus McKinnon Corporation
Harold S. Reemsnyder
Fracture Technology Associates
Roger H. Richman
Daedalus Associates Inc.
Michel Rigaud
École Polytechnique (Montreal)
Ashok Saxena
Georgia Institute of Technology
James J. Scutti
Massachusetts Materials Research, Inc.
Tom Service
Altran Corporation
Shahram Sheybany
Pacific Metallurgical Company
David A. Shifler
Naval Surface Warfare Center
Roch J. Shipley
Packer Engineering Inc.
Sujeet Sinha
National Institute of Advanced Industrial Science and Technology
Charles O. Smith
Engineering Consultant
V.P. Swaminathan
Turbomet International
Aaron Tanzer
Siemens-Westinghouse
R. Bruce Thompson
Iowa State University
George E. Totten
G.E. Totten & Associates LLC
George F. Vander Voort
Buehler, Ltd.
James R. Varner
Alfred University
Frank W. Veit
Siemens Dematic Rapistans Systems Division
Y. Wang
Bournemouth University
William R. Warke
Thomas C. Wenzel
Accident Reconstruction Analysis Incorporated
Bryan E. Wilde
Richard Wilson
Albany Research Center
Paul H. Wirsching
University of Arizona
Timothy A. Wolff
EAD Aerospace, Inc.
Officers and Trustees of ASM International (2001–2002)
Officers
Gordon H. Geiger
President and Trustee
University of Arizona
Donald R. Muzyka
Vice President and Trustee
Stanley C. Theobald
Secretary and Managing Director
ASM International
John W. Pridgeon
Treasurer
Allvac
Aziz I. Asphahani
Immediate Past President and Trustee
Carus Chemical Company
Trustees
Reza Abbaschian
University of Florida
E. Daniel Albrecht
Advanced Ceramics Research, Inc.
Kathleen B. Alexander
Los Alamos National Laboratory
W. Raymond Cribb
Alloy Products
Brush Wellman Inc.
Subi Dinda
DaimlerChrysler Corporation
R.G. (Gil) Gilliland
Oak Ridge National Laboratory
UT-Battelle, LLC
Walter M. Griffith
Air Force Research Laboratory
Andrew R. Nicoll
Sulzer Metco Europe GmbH
George F. Vander Voort
Buehler Ltd.
Members of the ASM Handbook Committee (2001–2002)
Craig V. Darragh
(Chair 1999–; Member 1989–)
The Timken Company
Henry E. Fairman
(Vice Chair 2001–; Member 1993–)
Cooperheat/MQS Inspection Inc.
Bruce P. Bardes (1993–)
Materials Technology Solutions Company
Larry D. Hanke (1994–)
Materials Evaluation and Engineering Inc.
Jeffrey A. Hawk (1997–)
U.S. Department of Energy
Dennis D. Huffman (1982–)
The Timken Company
Dwight Janoff (1995–)
FMC Corporation
Kent L. Johnson (1999–)
Engineering Systems Inc.
Paul J. Kovach (1995–)
Stress Engineering Services Inc.
Donald R. Lesuer (1999–)
Lawrence Livermore National Laboratory
Huimin Liu (1999–)
Ford Motor Company
William L. Mankins (1989–)
Metallurgical Services Inc.
Srikanth Raghunathan (1999–)
Nanomat Inc.
Mahi Sahoo (1993–)
Natural Resources Canada
Karl P. Staudhammer (1997–)
Los Alamos National Laboratory
Kenneth B. Tator (1991–)
KTA-Tator Inc.
George F. Vander Voort (1997–)
Buehler Ltd.
George A. Wildridge (2000–)
Borg Warner Morse TEC Corporation
Dan Zhao (1996–)
Johnson Controls Inc.
Previous Chairs of the ASM Handbook Committee
R.J. Austin
(1992–1994) (Member 1984–1985)
L.B. Case
(1931–1933) (Member 1927–1933)
T.D. Cooper
(1984–1986) (Member 1981–1986)
E.O. Dixon
(1952–1954) (Member 1947–1955)
R.L. Dowdell
(1938–1939) (Member 1935–1939)
M.M. Gauthier
(1997–1998) (Member 1990–2000)
J.P. Gill
(1937) (Member 1934–1937)
J.D. Graham
(1966–1968) (Member 1961–1970)
J.F. Harper
(1923–1926) (Member 1923–1926)
C.H. Herty, Jr.
(1934–1936) (Member 1930–1936)
D.D. Huffman
(1986–1990) (Member 1982–)
J.B. Johnson
(1948–1951) (Member 1944–1951)
L.J. Korb
(1983) (Member 1978–1983)
R.W.E. Leiter
(1962–1963) (Member 1955–1958, 1960–1964)
G.V. Luerssen
(1943–1947) (Member 1942–1947)
G.N. Maniar
(1979–1980) (Member 1974–1980)
W.L. Mankins
(1994–1997) (Member 1989–)
J.L. McCall
(1982) (Member 1977–1982)
W.J. Merten
(1927–1930) (Member 1923–1933)
D.L. Olson
(1990–1992) (Member 1982–1988, 1989–1992)
N.E. Promisel
(1955–1961) (Member 1954–1963)
G.J. Shubat
(1973–1975) (Member 1966–1975)
W.A. Stadtler
(1969–1972) (Member 1962–1972)
R. Ward
(1976–1978) (Member 1972–1978)
M.G.H. Wells
(1981) (Member 1976–1981)
D.J. Wright
(1964–1965) (Member 1959–1967)
Staff
ASM International staff who contributed to the development of the Volume included Steven R. Lampman, Project Editor; Bonnie R. Sanders, Manager of Production; Gayle J. Anton, Editorial Assitant; Nancy Hrivnak and Carol Terman, Production Editors; and Kathryn Muldoon, Production Assistant. Editorial Assistance was provided by Elizabeth Marquard, Heather Lampman, and Mary Jane Riddlebaugh. The Volume was prepared under the direction of Scott D. Henry, Assistant Director of Technical Publications and William W. Scott, Jr., Director of Technical Publications.
Conversion to Electronic Files
ASM Handbook, Volume 11, Failure Analysis and Prevention, was converted to electronic files in 2003. The conversion was based on the First printing (2002). No substantive changes were made to the content of the Volume, but some minor corrections and clarifications were made as needed.
ASM International staff who oversaw the conversion of the Volume to electronic files were Sally Fahrenholz-Mann and Sue Hess. The electronic version was prepared under the direction of Stanley Theobald, Managing Director.
Credits, Failure Analysis and Prevention, Vol 11, Edited By William T. Becker, Roch J. Shipley, ASM International, 2002
Download citation file:
Sept. 30 – Oct. 4 | Cleveland, Ohio
Keep up to date with the latest materials and processing technologies. Register today for IMAT 2024 & IFHTSE World Congress!