Skip to Main Content
ASM Failure Analysis Case Histories

ASM Failure Analysis Case Histories: Rail and Rolling Stock

ASM International
ISBN electronic:
978-1-62708-231-0
Publication date:
2019
Book Chapter

Failure Analysis of a Wire Rope

By
K.P. Balan
K.P. Balan
Defence Metallurgical Research Laboratory
Search for other works by this author on:
Published:
2019

Abstract

Wire ropes, pulleys, counterweights, and connecting systems are used for auto tensioning of contact wires of electric railways. A wire rope in one such auto tensioning system suffered premature failure. Failure investigation revealed fatigue cracks initiating at nonmetallic inclusions near the surface of individual wire strands in the rope. The inclusions were identified as Al-Ca-Ti silicates in a large number of stringers, and some oxide and nitride inclusions were also found. The wire used in the rope did not conform to the composition specified for AISI 316 grade steel, nor did it satisfy the minimum tensile strength requirements. Failure of the wire rope was found to be due to fatigue; however, the ultimate fracture of the rope was the result of overload that occurred after fatigue failure had reduced the number of wire strands supporting the load.

You do not currently have access to this content.
Don't already have an account? Register

K.P. Balan, 2019. "Failure Analysis of a Wire Rope", ASM Failure Analysis Case Histories: Rail and Rolling Stock

Download citation file:


Close
Close Modal
This Feature Is Available To Subscribers Only

Sign In or Create an Account

Close Modal
Close Modal