Skip to Main Content
ASM Failure Analysis Case Histories

ASM Failure Analysis Case Histories: Pulp and Paper Processing Equipment

ASM International
ISBN electronic:
978-1-62708-230-3
Publication date:
2019
Book Chapter

Stress-Corrosion Cracking of a Pandia Digester Inlet Cone

By
D. G. Chakrapani
D. G. Chakrapani
MEI-Charlton, Inc.
Search for other works by this author on:
Published:
2019

Abstract

The Pandia digester is a long cylindrical vessel which uses alkaline sulfite liquor to cook sawdust for pulping. The inlet cone was fabricated from AISI 304L stainless steel with E308 welds. Typical liquor concentration was approximately 80% NaOH, 20% Na2SO3 with chloride concentrations at 2 grams per liter. The operating pressures in the inlet cone were up to 1.2 MN/sq m (170 psig). The inlet cone had developed leaks within a year of service. Liquid penetrant inspection showed significant through-wall cracking near the fillet welds joining the bottom flange and side wall and the butt welds. Metallographic specimens were prepared from the welds to examine the microstructure and nature of the cracks. The cooking liquor at the inlet cone contained over ppm chlorides and was aggressive to 304 stainless steel. The cracking was identified as chloride-induced SCC. The inlet cone was replaced with an Inconel clad carbon steel inlet cone to combat the SCC.

You do not currently have access to this content.
Don't already have an account? Register

D. G. Chakrapani, 2019. "Stress-Corrosion Cracking of a Pandia Digester Inlet Cone", ASM Failure Analysis Case Histories: Pulp and Paper Processing Equipment

Download citation file:


Close
Close Modal
This Feature Is Available To Subscribers Only

Sign In or Create an Account

Close Modal
Close Modal