Skip to Main Content
Skip Nav Destination

Abstract

Structural members in a radar antenna system are held together by cadmium-plated high-strength steel bolts, several of which had fractured along the fillet near the head. Investigators determined that the bolts did not seat properly, making contact only at the periphery, which subjected them to high stress concentrations in the fillet region. They also concluded that the intergranular nature of the fracture, as revealed by scanning electron fractography, pointed to hydrogen embrittlement as a contributing factor. This chapter provides a summary of the investigation along with a recommendation to consider adding spring washers to the assembly.

You do not currently have access to this chapter.
Don't already have an account? Register

Failure of Bolts in a Radar Antenna System Reflector Joint, Failure Analysis of Engineering Structures: Methodology and Case Histories, By V. Ramachandran, A.C. Raghuram, R.V. Krishnan, S.K. Bhaumik, ASM International, 2005, p 70–71, https://doi.org/10.31399/asm.tb.faesmch.t51270070

Download citation file:


Close
Close Modal

or Create an Account

Close Modal
Close Modal