Over the last 15 years there has been an increasing incidence of failure in rockbolts used in underground mines in Australia. Failures have also been observed in the United Kingdom where Australian Technology rockbolting is also used. Most of the failures in the United Kingdom were found to be initiated by corrosion pits, but in Australia, the fractures were considered likely to be due to stress-corrosion cracking (SCC). This paper reports a metallurgical study of 44 failed rockbolts from four different underground mines in Australia. The study confirmed that failure was generally due to SCC and showed that this was usually initiated by bending of the bolts that occurred due to lateral movement of the rock strata. It also showed that many of the failed bolts had very low toughness with Charpy impact values of 4 to 7 Joules.

Materials selection is closely related to the objectives of failure analysis and prevention. This article briefly reviews the general aspects of materials selection as a concern in both proactive failure prevention during design and as a possible root cause of failed parts. Coverage is more conceptual, with general discussions on the following topics: design and failure prevention, materials selection in design, materials selection for failure prevention, and materials selection and failure analysis. Because materials selection is just one part of the design process, the overall concept of design is discussed. The article also describes the role of the materials engineer in the design and materials selection process. It provides information on the significance of materials selection in both the prevention and analysis of failures.

Materials selection is an important engineering function in both the design and failure analysis of components. This article briefly reviews the general aspects of materials selection as a concern in proactive failure prevention during design and as a possible root cause of failed parts. It discusses the overall concept of design and describes the role of the materials engineer in the design and materials selection process. The article highlights the significance of materials selection in both the prevention and analysis of failures.