1-9 of 9 Search Results for

resin-film infusion

Sort by
Series: ASM Handbook
Volume: 11B
Publisher: ASM International
Published: 15 May 2022
DOI: 10.31399/asm.hb.v11B.a0006864
EISBN: 978-1-62708-395-9
... parts can be categorized as: Stheets with a flat extruded cross section greater than 0.4 mm (0.016 in.) thick ( Fig. 1a ) Film with a flat extruded cross section less than 0.4 mm (0.016 in.) thick ( Fig. 1a ) Annular extrudates with a hollow circular (tubular) cross section ( Fig. 1b ) Fiber...
Series: ASM Handbook
Volume: 11B
Publisher: ASM International
Published: 15 May 2022
DOI: 10.31399/asm.hb.v11B.a0006916
EISBN: 978-1-62708-395-9
.... The next step involves impregnating (or infusing) the resin into the fiber matrix, which may include woven fibers (glass cloth or woven carbon fiber) or unidirectional fiber tows. To achieve good fiber wetting, the impregnation process needs to be carefully controlled. Some prepregs are made using a hot...
Series: ASM Handbook
Volume: 11B
Publisher: ASM International
Published: 15 May 2022
DOI: 10.31399/asm.hb.v11B.a0006915
EISBN: 978-1-62708-395-9
... ). The term engineering resin or engineering plastic usually refers only to thermoplastics, which can be molded and remolded to shape, and excludes thermosets such as epoxy resins that cure into an infusible solid. Some rubbers (e.g., polyurethanes) that are cured or vulcanized are nevertheless classed...
Series: ASM Handbook
Volume: 11B
Publisher: ASM International
Published: 15 May 2022
DOI: 10.31399/asm.hb.v11B.a0006939
EISBN: 978-1-62708-395-9
..., functionalized polymers, soluble organo-molybdenum additives, and dispersed nanoparticles. Their main properties are improved flow, reduced wear, reduced cycle times, and improved dispersion. They are mainly used in the film industry to prevent film layers from sticking to one another and in engine oils...
Series: ASM Handbook
Volume: 11B
Publisher: ASM International
Published: 15 May 2022
DOI: 10.31399/asm.hb.v11B.a0006924
EISBN: 978-1-62708-395-9
... Abstract This article discusses the most common thermal analysis methods for thermosetting resins. These include differential scanning calorimetry, thermomechanical analysis, thermogravimetric analysis, and dynamic mechanical analysis. The article also discusses the characterization of uncured...
Series: ASM Handbook
Volume: 11B
Publisher: ASM International
Published: 15 May 2022
DOI: 10.31399/asm.hb.v11B.a0006944
EISBN: 978-1-62708-395-9
... Polyamide nylon 6 50/122 215/419 Polyamide nylon 6/10 40/104 227/440.6 Polyetherether ketone (PEEK) 143/289.4 334/633.2 Polyethyleneterephthalate (PET) 70/158 80/176 Styrene acrylonitrile (SAN) 100/212 115/239 Epoxy resins 50/122 200/392 Polyester resin (UP) 60/140 170/338...
Series: ASM Handbook
Volume: 11B
Publisher: ASM International
Published: 15 May 2022
DOI: 10.31399/asm.hb.v11B.9781627083959
EISBN: 978-1-62708-395-9
Book Chapter

Series: ASM Handbook Archive
Volume: 11
Publisher: ASM International
Published: 01 January 2002
DOI: 10.31399/asm.hb.v11.a0003548
EISBN: 978-1-62708-180-1
... preparation (mill scale, coatings surface finish, etc.), environmental composition (trace contaminants, dissolved gases, etc.), temperature, flow rate, solution concentration, and degree of agitation or aeration. In addition, corrosion product films and other changes in surface composition can also occur...
Series: ASM Handbook
Volume: 11
Publisher: ASM International
Published: 15 January 2021
DOI: 10.31399/asm.hb.v11.a0006783
EISBN: 978-1-62708-295-2
.... This includes material composition, heat treatment, surface preparation (mill scale, coatings, surface finish, etc.), environmental composition (trace contaminants, dissolved gases, etc.), temperature, flow rate, solution concentration, and degree of agitation or aeration. In addition, corrosion product films...