1-20 of 708 Search Results for

provide

Sort by
Image
Published: 01 January 2002
Fig. 32 Redesign of castings to provide progressive solidification through the use of tapered walls. (a) Elbow design. (b) Valve fitting design. Source: Ref 31 More
Image
Published: 30 August 2021
Fig. 12 Redesign of castings to provide progressive solidification through the use of tapered walls. (a) Elbow design. (b) Valve fitting design. Source: Ref 15 More
Image
Published: 15 May 2022
Fig. 14 Details of assembled parts illustrating clearances that provide tolerance variation in parts during production More
Image
Published: 01 January 2002
Fig. 4 A constant-life diagram for alloy steels that provides combined axes for more ready interpretation. Note the presence of safe-life, finite-life lines on this plot. This diagram is for average test data for axial loading of polished specimens of AISI 4340 steel (ultimate tensile strength More
Image
Published: 01 December 1993
Fig. 1 Main landing gear sliding strut provided for destructive examination. Arrow indicates region that was hard chromium plated. Wheel axle is at lower end. More
Image
Published: 01 December 2019
Fig. 1 A schematic drawing of a semi-float axle is provided with typical nomenclature More
Image
Published: 01 June 2019
Fig. 2 Crack morphology provided the clue in a type 304 stainless bellows failure. Chloride stress-corrosion cracking (right) was suspected but the actual cracks more closely resembled those caused by caustic stress corrosion (left). More
Image
Published: 30 August 2021
Fig. 10 The orientation of the actual weld throat provides evidence of the principal loading direction that caused the failure. (a) Assumed throat of a fillet weld and actual throat for shear loading. (b) Actual failure plane approaches parallel for tensile load. (c) Actual failure plane More
Image
Published: 15 May 2022
Fig. 9 Providing support for bosses and material feeding to bosses on injection molded parts without creating heavy wall sections, which lead to surface blemishes due to sink marks. Reprinted from Ref 1 with permission by Elsevier. Copyright Elsevier 2017 More
Image
Published: 15 May 2022
Fig. 19 Date stamp on the interior surface of this part provides a cost-effective means of tracing production parts back to specific processing conditions and resin lots. More
Series: ASM Failure Analysis Case Histories
Publisher: ASM International
Published: 01 June 2019
DOI: 10.31399/asm.fach.aero.c0089722
EISBN: 978-1-62708-217-4
... provided no support and offered no resistance to vibration. The line was leaking hydraulic fluid at the nut end of the elbow. Investigation supported the conclusion that failure was by fatigue cracking initiated from a notch at the root of the weld and was propagated by cyclic loading of the tubing...
Series: ASM Failure Analysis Case Histories
Publisher: ASM International
Published: 01 June 2019
DOI: 10.31399/asm.fach.conag.c0092155
EISBN: 978-1-62708-221-1
..., of the case as a result of several factors. Recommendations included reducing the high local stresses at the pitch line to an acceptable level with a design modification. Also suggested was specification of a core hardness of 35 to 40 HRC to provide adequate support for the case and to permit attainment...
Series: ASM Handbook
Volume: 11A
Publisher: ASM International
Published: 30 August 2021
DOI: 10.31399/asm.hb.v11A.a0006832
EISBN: 978-1-62708-329-4
... are defects related to inadequate or insufficient instructions and/or warnings. Allegations regarding warnings are either that no warnings and/or instructions were provided for proper use, assembly, care, and/or disposal, or, if warnings were provided, they were defective because they did not adequately warn...
Series: ASM Failure Analysis Case Histories
Publisher: ASM International
Published: 01 June 2019
DOI: 10.31399/asm.fach.process.c0047641
EISBN: 978-1-62708-235-8
... Abstract A Ti-6Al-4V alloy pressure vessel failed during a proof-pressure test, fracturing along the center girth weld. The girth joints were welded with the automatic gas tungsten arc process utilizing an auxiliary trailing shield attached to the welding torch to provide inert-gas shielding...
Series: ASM Failure Analysis Case Histories
Publisher: ASM International
Published: 01 June 2019
DOI: 10.31399/asm.fach.aero.c0006436
EISBN: 978-1-62708-217-4
... that the failure of the pylon attachment stud was caused by general corrosion followed by SCC. The stud was not adequately protected against corrosion by the coating. It was recommended that the coating be applied to a thickness of 38 to 75 micron (1.5 to 3 mil) to provide long-time corrosion resistance...
Series: ASM Handbook
Volume: 11B
Publisher: ASM International
Published: 15 May 2022
DOI: 10.31399/asm.hb.v11B.a0006868
EISBN: 978-1-62708-395-9
... Abstract This article presents the benefits of selecting plastics for products to be manufactured. It discusses the four key considerations for plastic part design: material, process, tooling, and design. The article provides a detailed discussion of the development sequence for plastic parts...
Series: ASM Handbook
Volume: 11B
Publisher: ASM International
Published: 15 May 2022
DOI: 10.31399/asm.hb.v11B.a0006851
EISBN: 978-1-62708-395-9
... traditional film. For example, digital photography provides immediate availability of images that are viewable on the camera imaging screen or on a computer screen so that inadequacies in illumination, color, focus, or exposure can be quickly detected and corrected. This is especially useful in documenting...
Series: ASM Failure Analysis Case Histories
Publisher: ASM International
Published: 01 June 2019
DOI: 10.31399/asm.fach.matlhand.c9001527
EISBN: 978-1-62708-224-2
... by the number of strands, the number of wires per strand, the type of core, the “lay” (length) direction, left or right handedness, and many other attributes. Rope grades are rated in tons of breaking strength. The individual wires provide strength, whereas the construction dictates service characteristics...
Series: ASM Handbook
Volume: 11
Publisher: ASM International
Published: 15 January 2021
DOI: 10.31399/asm.hb.v11.a0006761
EISBN: 978-1-62708-295-2
... Abstract Mechanical testing is an evaluative tool used by the failure analyst to collect data regarding the macro- and micromechanical properties of the materials being examined. This article provides information on a few important considerations regarding mechanical testing that the failure...
Series: ASM Failure Analysis Case Histories
Publisher: ASM International
Published: 01 June 2019
DOI: 10.31399/asm.fach.aero.c0046972
EISBN: 978-1-62708-217-4
... included application of a protective coating to the blades, provided the coating was sufficiently ductile to avoid cracking during operation to prevent surface oxidation. Such a coating would also alleviate thermal differentials, provided the thermal conductivity of the coating exceeded that of the base...