1-20 of 90 Search Results for

powder treatments

Follow your search
Access your saved searches in your account

Would you like to receive an alert when new items match your search?
Close Modal
Sort by
Image
Published: 01 January 2002
Fig. 33 Light micrograph of a melted region found on an AISI D2 powder metallurgy die after heat treatment. Specimen etched with Marble's reagent More
Image
Published: 15 January 2021
Fig. 42 Light micrograph of a melted region found on an AISI D2 powder metallurgy die after heat treatment. Specimen etched with Marble’s reagent More
Image
Published: 01 January 2002
Fig. 31 AISI D2 powder metallurgy die component that melted and deformed because of flame impingement during heat treatment. (a) End view. 4.5×. (b) Microstructure in the affected region. Etched with Marble's reagent. 150× More
Image
Published: 30 August 2021
Fig. 31 AISI D2 powder metallurgy die component that melted and deformed because of flame impingement during heat treatment. (a) End view. Original magnification: 4.5×. (b) Microstructure in the affected region. Etched with Marble’s reagent. Original magnification: 150× More
Series: ASM Failure Analysis Case Histories
Publisher: ASM International
Published: 01 June 2019
DOI: 10.31399/asm.fach.process.c0045926
EISBN: 978-1-62708-235-8
... Abstract A batch of bimetal foil/epoxy laminates was rejected because of poor peel strength. The laminates were manufactured by sintering a nickel/phosphorus powder layer to a copper foil, cleaning, then chromate conversion coating the nickel-phosphorus surface, and laminating the nickel...
Series: ASM Handbook Archive
Volume: 11
Publisher: ASM International
Published: 01 January 2002
DOI: 10.31399/asm.hb.v11.a0009222
EISBN: 978-1-62708-180-1
... Abstract This article describes the six fundamental factors that decide a tool's performance. These are mechanical design, grade of tool steel, machining procedure, heat treatment, grinding, and handling. A deficiency in any one of the factors can lead to a tool and die failure. The article...
Series: ASM Handbook
Volume: 11A
Publisher: ASM International
Published: 30 August 2021
DOI: 10.31399/asm.hb.v11A.a0006838
EISBN: 978-1-62708-329-4
... considerations, and quality assurance. The emphasis is on the design and metallurgical aspects for the two main types of metal AM processes: powder-bed fusion (PBF) and directed-energy deposition (DED). The article also describes the processes involved in binder jet sintering, provides information on the design...
Series: ASM Failure Analysis Case Histories
Publisher: ASM International
Published: 01 June 2019
DOI: 10.31399/asm.fach.conag.c9001198
EISBN: 978-1-62708-221-1
...) Eliminate the grooves; 2) Remove the ferritic bright border; 3) Avoid undercooling in the mold and therefore the formation of granular graphite; 4) Inoculate with finely powdered ferrosilicon into the melt for the same purpose; and, 5) Anneal at lower temperature or eliminate subsequent treatment...
Series: ASM Failure Analysis Case Histories
Publisher: ASM International
Published: 01 June 2019
DOI: 10.31399/asm.fach.bldgs.c9001548
EISBN: 978-1-62708-219-8
... impregnation treatments which are known to be corrosive to metals. This is an unusual problem, never before encountered by the sources consulted. Even totally saturated panels would not be expected to fail in this manner. Based on the above, it appeared that the only possible source...
Series: ASM Failure Analysis Case Histories
Publisher: ASM International
Published: 01 June 2019
DOI: 10.31399/asm.fach.modes.c9001177
EISBN: 978-1-62708-234-1
... or the outside of the tube. However, indications of tightly closed cracks could be seen on the outer surface, which had been in contact with the chloride solution. A test for cracks by the magnetic powder technique was not possible with the austenitic material. By means of the colour penetration process, however...
Series: ASM Failure Analysis Case Histories
Volume: 3
Publisher: ASM International
Published: 01 December 2019
DOI: 10.31399/asm.fach.v03.c9001784
EISBN: 978-1-62708-241-9
... Abstract A 13/16-in. hex socket failed while in use. Analysis (hardness testing, optical and scanning electron microscopy, and EDS) revealed that the socket was made of low carbon steel formed in a powder metallurgy process. A number of flaws were found including nonuniform wall thickness, poor...
Series: ASM Handbook Archive
Volume: 11
Publisher: ASM International
Published: 01 January 2002
DOI: 10.31399/asm.hb.v11.a0001814
EISBN: 978-1-62708-180-1
...: burning or incipient melting can also occur in extreme cases. Figure 31(a) shows an end view of a powder metallurgy die component made from AISI D2 tool steel that melted and deformed due to highly excessive localized temperatures during heat treatment. The microstructure in this region ( Fig. 31b...
Series: ASM Handbook
Volume: 11A
Publisher: ASM International
Published: 30 August 2021
DOI: 10.31399/asm.hb.v11A.a0006818
EISBN: 978-1-62708-329-4
... component made from AISI D2 tool steel that melted and deformed due to highly excessive localized temperatures during heat treatment. The microstructure in this region ( Fig. 31b ) shows the melted region, heat-affected zone, and base microstructure. Fig. 31 AISI D2 powder metallurgy die component...
Series: ASM Handbook Archive
Volume: 11
Publisher: ASM International
Published: 01 January 2002
DOI: 10.31399/asm.hb.v11.a0003507
EISBN: 978-1-62708-180-1
... formed parts cracking cracks forging grain flow heat treatment hydrogen content imperfections ingot pipe laminations metalworking nonmetallic inclusions pits porosity scabs seams sheet metal forming unmelted electrodes workability WROUGHT FORMS are produced by a wide variety...
Series: ASM Failure Analysis Case Histories
Publisher: ASM International
Published: 01 June 2019
DOI: 10.31399/asm.fach.aero.c0047793
EISBN: 978-1-62708-217-4
.... The microstructure of the metal in the impeller exhibited scattered porosity and carbide particles and appeared to be a sintered powder metallurgy compact. Metallographic examination of a section through the damaged splines and of a section through the adjacent undamaged part of the same splines disclosed...
Series: ASM Failure Analysis Case Histories
Publisher: ASM International
Published: 01 June 2019
DOI: 10.31399/asm.fach.aero.c9001583
EISBN: 978-1-62708-217-4
... verification, accessed overall workmanship, and measured the respective surface roughness of the rods in an effort to identify any discrepancies. Next, mechanical testing was performed, followed by optical and electron microscopy, and chemical analysis. Finally, ARL performed laboratory heat treatments...
Series: ASM Failure Analysis Case Histories
Volume: 2
Publisher: ASM International
Published: 01 December 1993
DOI: 10.31399/asm.fach.v02.c9001265
EISBN: 978-1-62708-215-0
.... The sintered porous coating exhibited multiple regions where fatigue fracture of the neck region occurred, as well as indications that the sintering process did not fully incorporate the beads onto the substrate. Better process control during sintering and use of subsequent heat treatments to ensure a bimodal...
Series: ASM Handbook
Volume: 11B
Publisher: ASM International
Published: 15 May 2022
DOI: 10.31399/asm.hb.v11B.a0006864
EISBN: 978-1-62708-395-9
... Applications and Typical Products In the simplest terms, all plastics processing techniques involve three key steps: fluidizing (plasticating), shaping, and solidification. Raw materials are typically sourced as pellets or powders (thermoplastic) or as monomeric liquid and cross-linking agent (thermoset...
Series: ASM Handbook
Volume: 11
Publisher: ASM International
Published: 15 January 2021
DOI: 10.31399/asm.hb.v11.a0006768
EISBN: 978-1-62708-295-2
... of this article and are not discussed. The article also briefly summarizes the theory of XRD analysis and describes recent advances in equipment capability. Comprehensive, detailed treatments of XRD residual-stress measurement theory can be found in Ref 1 to 9 . X-ray diffraction techniques have been...
Series: ASM Handbook Archive
Volume: 11
Publisher: ASM International
Published: 01 January 2002
DOI: 10.31399/asm.hb.v11.a0003528
EISBN: 978-1-62708-180-1
... on measurement validation. The article also provides information on stress-corrosion cracking and corrosion fatigue. The importance of residual stress in fatigue is described with examples. The article explains the effects of heat treatment and manufacturing processes on residual stress. It concludes...