1-20 of 687 Search Results for

image

Sort by
Image
Published: 30 August 2021
Fig. 107 Backscatter image. Left side of image is base metal; right side is the defect area. Original magnification: 116× More
Image
Published: 01 January 2002
Fig. 3 SEM image of fracture surface of nickel-base alloy (Inconel 751, annealed and aged) after stress rupture (730 °C, or 1350 °F; 380 MPa, or 55 ksi; 125 h). (a) Low-magnification view, with picture width shown at approximately 0.35 mm (0.0138 in.) from original magnification of 250×. (b More
Image
Published: 01 January 2002
Fig. 44 SEM secondary electron image of LME in steel locomotive axle More
Image
Published: 01 January 2002
Fig. 45 SEM backscattered electron image of area within Fig. 44 , showing points identified for detailed EDS analysis More
Image
Published: 01 January 2002
Fig. 1 SEM image of flaky metallic contaminants determined to be a mix of steel and aluminum particles by backscatter mode image. (a) Secondary electron imaging mode where particles are not distinguished by composition. (b) Image from backscatter mode, which shows the lower atomic number More
Image
Published: 01 January 2002
Fig. 7 (a) SEM image and (b) EDS spectrum (10 kV) for fingerprint residue on a clean steel surface. Sometimes other elements, from perspiration, such as chlorine, or potassium and sodium may also appear in fingerprints. More
Image
Published: 01 January 2002
Fig. 9 SEM image showing carbon residue buildup from the electron beam scan area in the SEM More
Image
Published: 01 January 2002
Fig. 15 Scanning electron image showing isolated degradation of the grip material. 30× More
Image
Published: 01 January 2002
Fig. 26 Scanning electron image showing brittle fracture features at the crack initiation site, characteristic of environmental stress cracking. 24× More
Image
Published: 01 January 2002
Fig. 28 Scanning electron image showing brittle fracture features on the failed jacket crack surface. 20× More
Image
Published: 01 January 2002
Fig. 29 Scanning electron image showing features associated with brittle fracture and slow crack growth within the crack initiation site. 100× More
Image
Published: 01 January 2002
Fig. 30 Scanning electron image showing features indicative of rapid crack extension within the final fracture zone. 20× More
Image
Published: 01 January 2002
Fig. 34 Scanning electron image showing features characteristic of severe degradation of the filter material. 118× More
Image
Published: 01 January 2002
Fig. 39 Scanning electron image showing characteristic brittle fracture features on the housing crack surface. 100× More
Image
Published: 01 January 2002
Fig. 5 Example of a layered structure of copper, niobium, and zirconium. (a) Imaged using secondary electrons. (b) Imaged using backscattered electrons. Copper appears dark gray, zirconium is light gray, and niobium is white. More
Image
Published: 01 January 2002
Fig. 9 Total positive ion image of stainless steel surface (50 by 50 μm) revealed by TOF-SIMS More
Image
Published: 01 June 2019
Fig. 1 Scanning electron image showing brittle fracture features on the failed jacket crack surface. 20× More
Image
Published: 01 June 2019
Fig. 10 Thickness mapping image of lower plate, Riser 55 More
Image
Published: 01 June 2019
Fig. 11 Visual image of crack in upper plate vertical weld, Riser 55 More
Image
Published: 01 June 2019
Fig. 13 Image of perpendicular crack with liquid penetrant results overlay More