1-20 of 259 Search Results for

coloring

Follow your search
Access your saved searches in your account

Would you like to receive an alert when new items match your search?
Close Modal
Sort by
Image
Published: 01 December 1992
Fig. 4 Stud 3 and companion nut. Note the light-colored fracture aces. 1.5×. More
Image
Published: 01 December 1992
Fig. 6 Stain etch using hot Murakama's reagent. Dark coloration indicates presence of carbides. 950×. More
Image
Published: 01 December 1992
Fig. 5 Micrograph showing gray-colored deposit. Note large particles and grain-boundary network or film. This structure was observed only in the dark-colored layer at the inside surface of the tubing in Fig. 4 . Unetched. 500×. More
Image
Published: 01 December 1993
Fig. 14 Micrograph of light-colored phase found in the base metal (pipe) next to weld W-19. 30.5× More
Image
Published: 01 June 2019
Fig. 5 The transverse crack and associated copper-colored inclusion. More
Image
Published: 01 December 2019
Fig. 1 As-received golf club. (Color figure online) More
Image
Published: 01 December 2019
Fig. 2 Cracks in driver club head. (Color figure online) More
Image
Published: 01 December 2019
Fig. 3 Sectioned driver club head. (Color figure online) More
Image
Published: 01 December 2019
Fig. 5 Transverse crack on interior surface of club face plate. (Color figure online) More
Image
Published: 01 December 2019
Fig. 9 Golden-yellow color copper-alloy streaks on pipe OD surface More
Series: ASM Handbook
Volume: 11B
Publisher: ASM International
Published: 15 May 2022
DOI: 10.31399/asm.hb.v11B.a0006939
EISBN: 978-1-62708-395-9
... Inorganic pigments Organic pigments Varieties of chromatography Less variety, narrow spectrum More varieties, wider spectrum Color characteristics Lower brightness, dark Bright Tinting strength Low color strength High color strength Special dosage forms Lower than organic Variety...
Series: ASM Failure Analysis Case Histories
Publisher: ASM International
Published: 01 June 2019
DOI: 10.31399/asm.fach.matlhand.c0047321
EISBN: 978-1-62708-224-2
... drum drove the brake drum, and resistance was provided by brake bands applied to the outside surface of the brake drum. Friction during heavy service was sufficient to heat the brake drum, clutch mount, and disk to a red color. Examination of the assembly indicated that the brake drum would cool faster...
Series: ASM Failure Analysis Case Histories
Volume: 1
Publisher: ASM International
Published: 01 December 1992
DOI: 10.31399/asm.fach.v01.c9001115
EISBN: 978-1-62708-214-3
.... The black substance at the threads is oil. The pin is to the right. ∼0.38×. Fig. 5 Micrograph showing gray-colored deposit. Note large particles and grain-boundary network or film. This structure was observed only in the dark-colored layer at the inside surface of the tubing in Fig. 4 . Unetched...
Series: ASM Failure Analysis Case Histories
Volume: 1
Publisher: ASM International
Published: 01 December 1992
DOI: 10.31399/asm.fach.v01.c9001102
EISBN: 978-1-62708-214-3
... graph of fracture surface coating. Fig. 4 Stud 3 and companion nut. Note the light-colored fracture aces. 1.5×. Fig. 5 Enlargement of bottom section in Fig. 2 , showing crack network. 4.0×. Fig. 8 Backscattered SEM micrograph of a polished metallographic specimen, showing...
Series: ASM Failure Analysis Case Histories
Volume: 2
Publisher: ASM International
Published: 01 December 1993
DOI: 10.31399/asm.fach.v02.c9001371
EISBN: 978-1-62708-215-0
... in Vilella's reagent. 142× Abstract A type 410 stainless steel circulating water pump shaft used in a fossil power steam generation plant failed after more than 7 years of service. Visual examination showed the fracture surface to be coated with a thick, spalling, rust-colored scale, along...
Series: ASM Failure Analysis Case Histories
Publisher: ASM International
Published: 01 June 2019
DOI: 10.31399/asm.fach.process.c0047641
EISBN: 978-1-62708-235-8
... of the segmented backup ring was provided, and a fine-mesh stainless steel screen diffuser was incorporated in the channel section of the backup ring to prevent air from leaking in. A titanium alloy color chart was furnished to permit correlation of weld-zone discoloration with the degree of atmospheric...
Series: ASM Failure Analysis Case Histories
Publisher: ASM International
Published: 01 June 2019
DOI: 10.31399/asm.fach.process.c0047297
EISBN: 978-1-62708-235-8
... Abstract Door-closer cylinder castings manufactured of class 30 gray iron were breaking during machining. The manufacturing source reported that a random sampling of castings from this lot had hardnesses from 180 to 210 HRB. Based on the color of the components, heat treatment of these castings...
Series: ASM Failure Analysis Case Histories
Publisher: ASM International
Published: 01 June 2019
DOI: 10.31399/asm.fach.process.c9001188
EISBN: 978-1-62708-235-8
... Abstract A short fracture section of a forged and normalized Ck 35 (DIN 17200) steel slide showed three distinct zones: a dark colored crystalline area, an incipient crack propagating into a far advanced, rubbed fracture surface, and a fine crystalline final break. Metallographic examination...
Series: ASM Failure Analysis Case Histories
Publisher: ASM International
Published: 01 June 2019
DOI: 10.31399/asm.fach.design.c9001551
EISBN: 978-1-62708-233-4
... Abstract A multi-million dollar, four-color printing press used to produce a major weekly magazine was breaking pinions (shouldered shafts) on rolls. The cause of fracture was cyclic fatigue. Steel quality and heat treatment met expected standards. The pinion fracture showed multiple origins...
Series: ASM Failure Analysis Case Histories
Publisher: ASM International
Published: 01 June 2019
DOI: 10.31399/asm.fach.bldgs.c9001653
EISBN: 978-1-62708-219-8
..., the color near the key changed from yellow to red-brown. The gate was made from leaded red brass (85-5-5-5) while the spindle was made from silicon brass. It was concluded that the valves failed by dezincification resulting from bimetallic galvanic corrosion. It is common in the valve industry to use...