1-20 of 345 Search Results for

Corrosion-resistant steels

Follow your search
Access your saved searches in your account

Would you like to receive an alert when new items match your search?
Close Modal
Sort by
Series: ASM Failure Analysis Case Histories
Publisher: ASM International
Published: 01 June 2019
DOI: 10.31399/asm.fach.usage.c9001508
EISBN: 978-1-62708-236-5
...Abstract Abstract New type 321 corrosion-resistant steel heat shields were cracking during welding operations. A failure analysis was performed. The cause was found to be chloride induced stress-corrosion cracking. Packaging was suspected and confirmed to be the cause of the chloride...
Series: ASM Failure Analysis Case Histories
Publisher: ASM International
Published: 01 June 2019
DOI: 10.31399/asm.fach.design.c9001223
EISBN: 978-1-62708-233-4
...Abstract Abstract The corner of a welded sheet construction made from austenitic corrosion-resistant chromium-nickel steel showed corrosive attack of the outer sheet. This attack was most severe at the points subjected to the greatest heat during welding. Particularly large amounts of weld...
Series: ASM Failure Analysis Case Histories
Publisher: ASM International
Published: 01 June 2019
DOI: 10.31399/asm.fach.mech.c9001547
EISBN: 978-1-62708-225-9
... , p. 83 . 4. Corrosion Resisting Steel Wire , QQ-W-423B, 1969 . 5. Carpenter Custom 455 Technical Bulletin , Carpenter Technology Corp. , 1971 , p. 23 . 6. “On the Mechanism(s) of Stress-Corrosion Cracking,” by Pugh E. N. , Proceeding of AIME, Vol. 35 , Maryland, 1965 , p...
Series: ASM Failure Analysis Case Histories
Publisher: ASM International
Published: 01 June 2019
DOI: 10.31399/asm.fach.marine.c9001703
EISBN: 978-1-62708-227-3
... spacer, all of which were described as being made from “corrosion resisting steel, passivated”. The different thicknesses of spacer are needed to ensure proper alignment when attaching the antenna. There were no part references for the threaded studs or nuts. From this it was deduced that the antenna...
Series: ASM Failure Analysis Case Histories
Volume: 2
Publisher: ASM International
Published: 01 December 1993
DOI: 10.31399/asm.fach.v02.c9001304
EISBN: 978-1-62708-215-0
... solidification cracks. The joints had been produced using the mechanized gas-metal arc welding process. Cracking was attributed to improper control of welding parameters, and failure was attributed to weld defects. Air intakes Corrosion-resistant steels Diffusers Exhaust systems Low-cycle fatigue...
Series: ASM Handbook Archive
Volume: 11
Publisher: ASM International
Published: 01 January 2002
DOI: 10.31399/asm.hb.v11.a0001817
EISBN: 978-1-62708-180-1
... to eliminate the vapor space between the tube sheet and the partition head. For carbon and low-alloy steels, the corrosion-fatigue fracture surface is typically jagged, whereas the fracture surface of rust- and acid-resisting steels—for example, austenitic stainless steels—is usually flat. The number...
Series: ASM Handbook
Volume: 11A
Publisher: ASM International
Published: 30 August 2021
DOI: 10.31399/asm.hb.v11A.a0006813
EISBN: 978-1-62708-329-4
... of Design Effects of Welding Practices Effects of Brazing Practices Effects of Elevated Temperature Illustrations of Heat-Exchanger Failures Corrosion Resistance Example 1: Pitting of Stainless Steel Heat-Exchanger Tubes due to Chloride Ions in Flush Water Sample Selection Visual...
Series: ASM Handbook Archive
Volume: 11
Publisher: ASM International
Published: 01 January 2002
DOI: 10.31399/asm.hb.v11.a0003553
EISBN: 978-1-62708-180-1
... microscopic examination precipitation-hardening stainless steel sampling simulated-service tests stress concentration stress-corrosion cracking susceptibility titanium alloys welding STRESS-CORROSION CRACKING (SCC) is a failure process that occurs because of the simultaneous presence of tensile...
Series: ASM Handbook
Volume: 11
Publisher: ASM International
Published: 15 January 2021
DOI: 10.31399/asm.hb.v11.a0006794
EISBN: 978-1-62708-295-2
.... , The Effects of Sodium Nitrite on Corrosion Resistance of Steel Reinforcement in Concrete , Nat. Eng. Sci., Suppl. , Vol 3 , 2018 , p 87 – 102 55. Zhang T. and Li D.Y. , Improvement in the Corrosion-Erosion Resistance of 304 Stainless Steel with Alloyed Yttrium , J. Mater. Sci. , Vol...
Series: ASM Failure Analysis Case Histories
Publisher: ASM International
Published: 01 June 2019
DOI: 10.31399/asm.fach.chem.c9001525
EISBN: 978-1-62708-220-4
... for the more recently built tanks. Based on these findings, it was decided to explore the effects of the steam drying treatment on the corrosion resistance of the steel. To determine the effects of steam drying, several deep drawn, low-carbon steel panels were exposed to the same processing steps...
Series: ASM Failure Analysis Case Histories
Volume: 3
Publisher: ASM International
Published: 01 December 2019
DOI: 10.31399/asm.fach.v03.c9001820
EISBN: 978-1-62708-241-9
...-corrosion cracking. Based on test data and cost, A217-WC9 cast Cr–Mo steel would be a better alloy for the application. valve body corrosion H2S exposure Cr-Mo steel pitting cracks chemical analysis corrosion resistance A216-WCC (cast carbon steel) UNS J02503 A217-WC9 cast Cr–Mo steel UNS...
Book Chapter

Series: ASM Handbook Archive
Volume: 11
Publisher: ASM International
Published: 01 January 2002
DOI: 10.31399/asm.hb.v11.a0003548
EISBN: 978-1-62708-180-1
... through a conducting medium or electrolyte to the other more cathodic metal (liberating hydrogen and/or causing a “reduction” of oxides). This action is seen in Fig. 2 where a couple is made up of steel and mill scale. Fig. 2 Breaks in mill scale (Fe 3 O 4 ) leading to galvanic corrosion of steel...
Series: ASM Handbook
Volume: 11
Publisher: ASM International
Published: 15 January 2021
DOI: 10.31399/asm.hb.v11.a0006783
EISBN: 978-1-62708-295-2
...). This action is seen in Fig. 2 where a couple is made up of steel and mill scale. Fig. 2 Breaks in mill scale (Fe 3 O 4 ) leading to galvanic corrosion of steel The three essential components for galvanic corrosion are: Materials possessing different surface potential A common...
Series: ASM Handbook Archive
Volume: 11
Publisher: ASM International
Published: 01 January 2002
DOI: 10.31399/asm.hb.v11.a0003549
EISBN: 978-1-62708-180-1
... from corrosion. For example, stainless steel owes its corrosion-resistant properties to a passive surface film. The naturally occurring passive film is usually enhanced with immersion in a hot nitric acid solution...
Series: ASM Handbook Archive
Volume: 11
Publisher: ASM International
Published: 01 January 2002
DOI: 10.31399/asm.hb.v11.a0003555
EISBN: 978-1-62708-180-1
..., operation, or fabrication. Nickel alloys have improved resistance to environmental cracking over steels and stainless steels, although nickel alloys are not immune to SCC. Stress-corrosion cracking of certain nickel alloys has occurred in high-temperature halogen ion environments, high-temperature waters...
Series: ASM Failure Analysis Case Histories
Volume: 1
Publisher: ASM International
Published: 01 December 1992
DOI: 10.31399/asm.fach.v01.c9001097
EISBN: 978-1-62708-214-3
... temperature, which is about 33% greater than that of the notched cold-worked material. Thus, in an aggressive envirorment such as body fluids, which generate corrosion pits while the body simultaneously provides fatigue loading, the annealed austenitic stainless steels have a greater resistance to fatigue...
Series: ASM Failure Analysis Case Histories
Publisher: ASM International
Published: 01 June 2019
DOI: 10.31399/asm.fach.power.c9001609
EISBN: 978-1-62708-229-7
... International , Materials Park, OH , 1987 , pp. 355 and 1265 . 6. Espy R.H. , “ How Composition and Welding Conditions Affect Corrosion Resistance of Type 430 Stainless Steel ,” Preprint 22, National Association of Corrosion Engineers , Cleveland, OH , 1968 . 7. Anon. : ASME SA-268...
Series: ASM Handbook
Volume: 11
Publisher: ASM International
Published: 15 January 2021
DOI: 10.31399/asm.hb.v11.a0006785
EISBN: 978-1-62708-295-2
... for steam turbine rotors/discs, carbon and alloy steel components in boilers Residential and industrial water-delivery systems: Stainless steel PEX clamps (described earlier) and brass components General Characteristics of Stress-Corrosion Cracking The phenomenological characteristics of SCC...
Series: ASM Failure Analysis Case Histories
Publisher: ASM International
Published: 01 June 2019
DOI: 10.31399/asm.fach.petrol.c9001592
EISBN: 978-1-62708-228-0
... was caused by cyclic operations of the pump. To avoid this problem, a clean steel is recommended. The microstructure of the rod should be nearly free of inclusions. Corrosion protection of the surface with application of a suitable chemical program and/or coating of the surface with a corrosion resistant...
Series: ASM Handbook Archive
Volume: 11
Publisher: ASM International
Published: 01 January 2002
DOI: 10.31399/asm.hb.v11.a0003556
EISBN: 978-1-62708-180-1
... with the pH, oxidation reduction potential, resistivity, and water content of the soil as well as with the type of soil. Very dry soils that lack the electrolyte needed to support active corrosion cells are benign. Moist, aerobic soils, where oxygen can readily reach exposed steel, show corrosion rates...