Skip to Main Content
Skip Nav Destination

This book is an attempt to explain the metallurgical aspects of steel and its heat treatment to non-metallurgists, starting, from simple concepts taught in high-school-level chemistry classes and then building to more complex concepts involved in heat treatment of nearly all types of steel as well as cast iron. It was inspired by the author having worked with practicing bladesmiths for the past 15 to 20 years.

Most of the chapters in the book contain a summary at the end. These summaries provide a short review of the contents of each chapter. It may be useful to read these summaries before and perhaps after reading the chapter contents.

The Materials Information Society, ASM International, has published a book, Heat Treater’s Guide: Practices and Procedures for Irons and Steels, 2nd ed., 1995, that contains a wealth of information on available steels and is extremely useful to those who work and heat treat steel. A major goal of this book is to provide the necessary background that will permit a metal worker, not trained in metallurgy, to understand how to use the information in the ASM book, as well as other Handbooks published by ASM International.

I would like to acknowledge the help of two bladesmiths who have contributed to this book in several ways: Alfred Pendray and Howard Clark. Both men have helped me understand the level of work being done by U.S. bladesmiths, and they have also contributed to some of the experiments used in this book. They are also responsible for the production of this book, because of their encouragement to write it. In addition, I would like to acknowledge many useful discussions with fellow metallurgist William Dauksch, retired vice president of Nucor Steel, and my colleague, Prof. Brian Gleeson, who made many useful suggestions on the stainless steel chapter.

I am particularly indebted to Iowa State University and their Materials Science and Engineering Department for providing me with the opportunity to teach metallurgical engineering students about steel for over two decades, as well as to the Ames Laboratory, DoE, that provided access to optical and electron microscopes and supported most of my research activity. Many of the pictures and all of the methods of presentation in this book result from my experience teaching both laboratory and lecture courses to students and doing research at Iowa State University and its Ames Laboratory.

Ames, Iowa, February 2007

Send Email

Recipient(s) will receive an email with a link to 'Steel Metallurgy for the Non-Metallurgist > Preface' and will not need an account to access the content.

Subject: Steel Metallurgy for the Non-Metallurgist > Preface

(Optional message may have a maximum of 1000 characters.)

Close Modal

or Create an Account

Close Modal
Close Modal