Skip Nav Destination
ASM Failure Analysis Case Histories
ASM Failure Analysis Case Histories: Improper Maintenance, Repair, and Operating Conditions
ASM International
ISBN electronic:
978-1-62708-236-5
Publication date:
2019
Book Chapter
Failure of a Nickel-Base Alloy Incinerator Liner
-
Published:2019
Abstract
An alloy IN-690 (N06690) incinerator liner approximately 0.8 mm (0.031 in.) thick failed after only 250 h of service burning solid waste. Investigation supported the conclusion that the root cause of the failure was overfiring during startup and sulfidation of the nickel-base alloy. No recommendations were made.
You do not currently have access to this chapter.
Citation
Failure of a Nickel-Base Alloy Incinerator Liner, ASM Failure Analysis Case Histories: Improper Maintenance, Repair, and Operating Conditions, ASM International, 2019, https://doi.org/10.31399/asm.fach.usage.c0091756
Download citation file:
Oct. 28 – Nov. 1 | San Diego
Keep up-to-date at the premier event for the microelectronics failure analysis community. Register today for ISTFA 2024!
Related Book Content
Failure Analysis of a Pilot Scale Melter
ASM Failure Analysis Case Histories: Improper Maintenance, Repair, and Operating Conditions
Perforation of a Nickel-Base Alloy Kiln
ASM Failure Analysis Case Histories: Steelmaking and Thermal Processing Equipment
Oxidized Recuperator Pipes
ASM Failure Analysis Case Histories: Steelmaking and Thermal Processing Equipment
Failure of a Heat-Resistant Sinter Belt
Handbook of Case Histories in Failure Analysis
Pitting of a Condenser Tube in a Saltwater Heat Exchanger Due to Hydrogen Sulfide Contamination
ASM Failure Analysis Case Histories: Chemical Processing Equipment
Corrosion Failure of a Tee Fitting
ASM Failure Analysis Case Histories: Oil and Gas Production Equipment
Hydrogen-Stress Cracking of Type 410 Stainless Steel Splice Case Bolts
ASM Failure Analysis Case Histories: Mechanical and Machine Components
Hydrogen-Stress Cracking of Type 301 Stainless Steel Clamp
ASM Failure Analysis Case Histories: Mechanical and Machine Components
Diffusion in Solids
Diffusion in Solids: Key Topics in Materials Science and Engineering
Hot Corrosion of Stage 1 Nozzles in an Industrial Gas Turbine
Handbook of Case Histories in Failure Analysis