Skip Nav Destination
ASM Failure Analysis Case Histories
ASM Failure Analysis Case Histories: Mechanical and Machine Components
ASM International
ISBN electronic:
978-1-62708-225-9
Publication date:
2019
ASM Failure Analysis Case Histories: Mechanical and Machine Components documents more than 60 cases of structural and/or functional failure involving bearings, gears, fasteners, springs, mechanical drives, valves, and locking devices. The cases describe the investigation, identify the primary cause, and include remedial solutions. These case histories have been compiled from a wide variety of ASM International publication types, including ASM Handbook volumes, conference proceedings, technical books, journals, and magazines.
ASM Failure Analysis Case Histories: Mechanical and Machine Components
https://doi.org/10.31399/asm.fach.mech.9781627082259
ISBN (electronic): 978-1-62708-225-9
Publisher: ASM International
Published: 2019
Download citation file:
Table of Contents
-
Ball and Roller Bearings
-
A Survey of the Causes of Failure of Rolling BearingsView ChapterPublished:01 June 2019
-
Broken Inner Rings of Spherical Roller BearingsView ChapterByFriedrich Karl Naumann;Friedrich Karl NaumannMax-Planck-Institut für EisenforschungSearch for other works by this author on:Ferdinand SpiesFerdinand SpiesMax-Planck-Institut für EisenforschungSearch for other works by this author on:Published:01 June 2019
-
Destroyed Needle Bearing of a Packing MachineView ChapterByFriedrich Karl Naumann;Friedrich Karl NaumannMax-Planck-Institut für EisenforschungSearch for other works by this author on:Ferdinand SpiesFerdinand SpiesMax-Planck-Institut für EisenforschungSearch for other works by this author on:Published:01 June 2019
-
Failure of Electric Motor Ball BearingView ChapterByH.W. WaltonH.W. WaltonThe Torrington CompanySearch for other works by this author on:Published:01 June 2019
-
-
Belt and Chain Drives
-
Fractography of Steel Drive CablesView ChapterByR. M. ShemenskiR. M. ShemenskiPrincipal Metallurgist, Goodyear Tire & Rubber Co.Search for other works by this author on:Published:01 June 2019
-
-
Bushings and Bearing Surfaces
-
Wear and Failure of Babbit Bushes in Steam Turbine Sliding BearingsView ChapterByN.P. Barykin;N.P. BarykinInstitute for Metals Superplasticity Problems, Russian Academy of SciencesSearch for other works by this author on:F.A. Sadykov;F.A. SadykovInstitute for Metals Superplasticity Problems, Russian Academy of SciencesSearch for other works by this author on:I.R. AslanianI.R. AslanianInstitute for Metals Superplasticity Problems, Russian Academy of SciencesSearch for other works by this author on:Published:01 June 2019
-
Wear Failure of a Leaded Bronze Bearing: Correlation Between Plant Experience and Laboratory Wear Test DataView ChapterByQ. Ahsan;Q. AhsanDepartment of Materials and Metallurgical Engineering, Bangladesh University of Engineering and Technology (BUET)Search for other works by this author on:A.S.M.A. Haseeb;A.S.M.A. HaseebDepartment of Materials and Metallurgical Engineering, Bangladesh University of Engineering and Technology (BUET)Search for other works by this author on:E. Haque;E. HaqueDepartment of Materials and Metallurgical Engineering, Bangladesh University of Engineering and Technology (BUET)Search for other works by this author on:J.P. CelisJ.P. CelisDepartment of Metallurgy and Materials Engineering, Catholic University of LeuvenSearch for other works by this author on:Published:01 June 2019
-
Gears and Gearing
-
Abnormal Wear of a Pinion GearView ChapterByJivan B. ShahJivan B. ShahFailures Analyst, Ministry of Transport, Civil Aeronautics Branch, Canadian Air Transportation Administration, Aircraft Accident Investigation Div., Engineering LaboratorySearch for other works by this author on:Published:01 June 2019
-
Cast Steel Pinion Gear Shafts with Insufficient ElongationView ChapterByFriedrich Karl Naumann;Friedrich Karl NaumannMax-Planck-Institut für EisenforschungSearch for other works by this author on:Ferdinand SpiesFerdinand SpiesMax-Planck-Institut für EisenforschungSearch for other works by this author on:Published:01 June 2019
-
Failure of a Splined Shaft from a Newsprint PlantView ChapterPublished:01 June 2019
-
-
Locking and Clamping Devices
-
Fractured Lock Ring of DrumView ChapterByFriedrich Karl Naumann;Friedrich Karl NaumannMax-Planck-Institut für EisenforschungSearch for other works by this author on:Ferdinand SpiesFerdinand SpiesMax-Planck-Institut für EisenforschungSearch for other works by this author on:Published:01 June 2019
-
Springs
-
Broken Helical Compression SpringView ChapterByFriedrich Karl Naumann;Friedrich Karl NaumannMax-Planck-Institut für EisenforschungSearch for other works by this author on:Ferdinand SpiesFerdinand SpiesMax-Planck-Institut für EisenforschungSearch for other works by this author on:Published:01 June 2019
-
Coil Spring Failures in Aerospace HardwareView ChapterByK. T. KamberK. T. KamberSection Manager at the Material Sciences Laboratory, Ivan A. Getting Laboratories, Aerospace Corp.Search for other works by this author on:Published:01 June 2019
-
Failure Analysis of Helical Suspension Springs under Compressor Start/Stop ConditionsView ChapterByPublished:01 June 2019
-
Threaded Fasteners
-
Damage of a Screw in the Seal CouplingView ChapterByB. Kosec;B. KosecUniversity of Ljubljana, NTF—Department of Materials and MetallurgySearch for other works by this author on:L. Kosec;L. KosecUniversity of Ljubljana, NTF—Department of Materials and MetallurgySearch for other works by this author on:P. Skraba;P. SkrabaUniversity of Ljubljana, NTF—Department of Materials and MetallurgySearch for other works by this author on:F. BizjanF. BizjanUniversity of Ljubljana, Faculty of Mechanical EngineeringSearch for other works by this author on:Published:01 June 2019
-
Failure of 17-4 PH Stainless Steel Bolts on a Titan Space Launch VehicleView ChapterByLouis Raymond;Louis RaymondManager, Metallurgy Research Section, Aerospace Corp.Search for other works by this author on:Ernest G. KendallErnest G. Kendallhead, Metallurgy and Ceramics Dept., Aerospace Corp.Search for other works by this author on:Published:01 June 2019
-
Metallographic Characterization of Stress Corrosion Cracking in High Strength BoltsView ChapterByW.N. WeinsW.N. WeinsUniversity of NebraskaSearch for other works by this author on:Published:01 June 2019
-
Valves
-
Broken Full Lift Disk of a Safety ValveView ChapterByEgon KauczorEgon KauczorStaatliches Materialprüfungsamt an der FachhochschuleSearch for other works by this author on:Published:01 June 2019
-
Fractured Valve SpringView ChapterByFriedrich Karl Naumann;Friedrich Karl NaumannMax-Planck-Institut für EisenforschungSearch for other works by this author on:Ferdinand SpiesFerdinand SpiesMax-Planck-Institut für EisenforschungSearch for other works by this author on:Published:01 June 2019
-
Microstructural Analysis of the Brass Seat of a Valve from the 1907 Steam Tug ‘Hercules’View ChapterByCharlie R. Brooks;Charlie R. BrooksThe University of Tennessee, Materials Science and Engineering DepartmentSearch for other works by this author on:Dean MondayDean MondayThe University of Tennessee, Materials Science and Engineering DepartmentSearch for other works by this author on:Published:01 June 2019
-
Prematurely Broken Valve SpringView ChapterByFriedrich Karl Naumann;Friedrich Karl NaumannMax-Planck-Institut für EisenforschungSearch for other works by this author on:Ferdinand SpiesFerdinand SpiesMax-Planck-Institut für EisenforschungSearch for other works by this author on:Published:01 June 2019
