Failure of a Sprocket Drive Wheel in a Tracked All-Terrain Vehicle
-
Published:1993
Abstract
A sand-cast LM6M aluminum alloy sprocket drive wheel in an all-terrain vehicle failed. Extensive cracking had occurred around each of the six bolt holes in the wheel. Evidence of considerable deformation in this area was also noted. Examination indicated that the part failed because of gross overload. Use of an alloy with a much higher yield strength and improvement in design were recommended.
W.A. Pollard, Failure of a Sprocket Drive Wheel in a Tracked All-Terrain Vehicle, Handbook of Case Histories in Failure Analysis, Vol 2, Edited By Khlefa A. Esaklul, ASM International, 1993, p 58–60, https://doi.org/10.31399/asm.fach.v02.c9001303
Download citation file:
Join Failure Analysis Society
The ASM Failure Analysis Society (FAS) is a community where failure analysis professionals from all over the world can learn and grow in their field.
