Skip to Main Content

Abstract

Over the last 15 years there has been an increasing incidence of failure in rockbolts used in underground mines in Australia. Failures have also been observed in the United Kingdom where Australian Technology rockbolting is also used. Most of the failures in the United Kingdom were found to be initiated by corrosion pits, but in Australia, the fractures were considered likely to be due to stress-corrosion cracking (SCC). This paper reports a metallurgical study of 44 failed rockbolts from four different underground mines in Australia. The study confirmed that failure was generally due to SCC and showed that this was usually initiated by bending of the bolts that occurred due to lateral movement of the rock strata. It also showed that many of the failed bolts had very low toughness with Charpy impact values of 4 to 7 Joules.

You do not currently have access to this chapter.
Don't already have an account? Register

A. Crosky, B. Smith, B. Hebblewhite, 2019. "Failure of Rockbolts in Underground Mines in Australia", ASM Failure Analysis Case Histories: Construction, Mining, and Agricultural Equipment

Download citation file:


Close
Close Modal
This Feature Is Available To Subscribers Only

Sign In or Create an Account

Close Modal
Close Modal