Skip to Main Content
Skip Nav Destination

Abstract

A 6150 flat spring was found to be failed. The face of the spring was revealed to be under tensile stress. The failure was concluded to have begun at the dark spot on the edge where roughness resulted from shearing during the blanking operation.

You do not currently have access to this chapter.
Don't already have an account? Register

Flat-Spring Failure Due to an Edge Defect, ASM Failure Analysis Case Histories: Processing Errors and Defects, ASM International, 2019, https://doi.org/10.31399/asm.fach.process.c0048156

Download citation file:


Close
Close Modal

or Create an Account

Close Modal
Close Modal