Skip to Main Content
Skip Nav Destination


Aluminum alloy BS.1476-HE.15 by virtue of its high strength and low density finds application in the form of bars or sections for cranes, bridges, and other such structures where a reduction in dead weight load and inertia stresses is advantageous. Bars and sections in H.15 alloy are mostly produced by extrusion. Some material processed this way has been prone to exfoliation corrosion. Extended aging for 24 h at a temperature of 185 deg C (365 deg F) virtually suppresses the tendency for exfoliation corrosion to develop. Also, the use of a sprayed coating, either of aluminum or Al-1Zn alloy, was effective in halting and preventing this form of attack. While alarming, the appearance of exfoliation corrosion provides a valuable warning to the engineer or inspector before a severe weakening of the particular sections has occurred.

You do not currently have access to this chapter.
Don't already have an account? Register

Corrosion: Exfoliation Corrosion, ASM Failure Analysis Case Histories: Failure Modes and Mechanisms, ASM International, 2019

Download citation file:

Close Modal

or Create an Account

Close Modal
Close Modal