Skip to Main Content
Skip Nav Destination


A section of cast iron water main pipe contained a hole approximately 6.4 x 3.8 cm (2.5 x 1.5 in.). The pipe was laid in clay type soil. Examination revealed severe pitting around the hole and at the opposite side of the outside diam. A macroscopic examination of a pipe section at the hole area showed that the porosity extended a considerable distance into the pipe wall. Metallographic examination revealed a graphite structure distribution expected in centrifugally cast iron with a hypoeutectic carbon equivalent. Chemical analyses of a nonporous sample had a composition typical of cast iron pipe. Chemical analyses of the porous region had a substantial increase in carbon, silicon, phosphorus, and sulfur. The porous appearance and the composition of the soft porous residue confirmed graphitic corrosion. The selective leaching of iron leaves a residue rich in carbon, silicon, and phosphorus. The high sulfur content is attributed to ferrous sulfide from a sulfate reducing bacteria frequently associated with clay soils. Reinforced coal tar protective coating was recommended.

You do not currently have access to this chapter.
Don't already have an account? Register

Graphitic Corrosion of a Gray Iron Water-Main Pipe Resulting in a Corroded-Through Hole, ASM Failure Analysis Case Histories: Buildings, Bridges, and Infrastructure, ASM International, 2019,

Download citation file:

Close Modal

or Create an Account

Close Modal
Close Modal