Mechanical Failure of a Repair Welded Ferritic Malleable Cast Iron Spring Hanger
The right front spring hanger on a dual rear axle of the tractor of a tractor-trailer combination failed, causing the vehicle to roll-over. The hanger was made from malleable cast iron that had been heat treated to produce a decarburized surface layer and a pearlitic transition layer. It had been repair welded after breaking into two pieces longitudinally in a prior incident, using cast iron as weld metal. The repair weld bead on both surfaces missed the fracture over 15 to 20% of their lengths. The incomplete repair weld and brittleness of the weld metal and heat-affected zones led to the failure.
Alan A. Johnson, Joseph A. von Fraunhofer, 1993. "Mechanical Failure of a Repair Welded Ferritic Malleable Cast Iron Spring Hanger", Handbook of Case Histories in Failure Analysis, Khlefa A. Esaklul
Download citation file: