Failure of the J79 Engine Compressor Blade Due to Stall
Rotor blades in the compressor section of a J79 engine had failed. Optical, stereoscopic, microhardness testing, and SEM examinations were conducted to determine the cause. The blades were made of STS403 and were used uncoated. They were damaged over an extensive area, from the 15th through the 17th compressor stages, as were stator vanes and casing sections. The fractured surface of the 17th blade showed multiple origins along with secondary cracking and extensive propagation that preceded separation. The metallographic analysis of the microstructure suggested work hardening. Based on the results, the cause of the fractured blade was high-amplitude fatigue...
Kyo-Soo Song, Seon-Gab Kim, Young-Ha Hwang, Failure of the J79 Engine Compressor Blade Due to Stall, Handbook of Case Histories in Failure Analysis, Vol 3, Edited By Larry Berardinis, ASM International, 2019, p 37–42, https://doi.org/10.31399/asm.fach.v03.c9001757
Download citation file: