Skip to Main Content

Abstract

A bearing cup in a drive shaft assembly on an automobile was found to have failed. A detailed analysis was conducted using the QC story approach, which begins by proposing several possible failure scenarios then following them to determine the main root cause. A number of alternative solutions were identified and then validated based on chemical analysis, endurance and hardness tests, and microstructural examination. The investigation revealed that carbonitriding can effectively eliminate the type of failure encountered because it prevents through hardening of the bearing cup assembly.

You do not currently have access to this chapter.
Don't already have an account? Register

Yogesh Pathak, V. S. Aher, Analysis of Bearing Cup Assembly Failure in Drive Shaft Assembly, Handbook of Case Histories in Failure Analysis, Vol 3, Edited By Larry Berardinis, ASM International, 2019, p 51–56, https://doi.org/10.31399/asm.fach.v03.c9001759

Download citation file:


Close
Close Modal

or Create an Account

Close Modal
Close Modal