Skip to Main Content
ASM Handbook

Materials Selection and Design

Edited by
George E. Dieter
George E. Dieter
Search for other works by this author on:
ASM International
Volume
20
ISBN electronic:
978-1-62708-194-8
Publication date:
1997
Book Chapter

Safety in Design[1]

By
Charles O. Smith
Charles O. Smith
Search for other works by this author on:
Published:
1997
Page range:
139 - 145

Abstract

Any threat to personal safety should be regarded as a hazard and treated as such. This article discusses threats from several sources, such as kinematic/mechanical hazards, electrical hazards, energy hazards, human factors/ergonomic hazards, and environmental hazards. It describes hazard analysis in terms of failure modes and effects analysis, failure modes and criticality analysis, fault tree analysis, fault hazard analysis, and operating hazards analysis. The article discusses fail-safe designs, such as fail-passive designs, fail-active designs, and fail-operational designs, to ensure that a failure will either not affect the product or change it to a state in which no injury or damage will occur. It also provides information on the various types of warnings, such as visual warning, auditory warnings, olfactory warnings, tactile warnings, and tastable warnings.

You do not currently have access to this content.
Don't already have an account? Register

Charles O. Smith, 1997. "Safety in Design", Materials Selection and Design, George E. Dieter

Download citation file:


×
Close Modal
This Feature Is Available To Subscribers Only

Sign In or Create an Account

Close Modal
Close Modal