Skip to Main Content
ASM Handbook

Friction, Lubrication, and Wear Technology

Edited by
George E. Totten
George E. Totten
Search for other works by this author on:
ASM International
Volume
18
ISBN electronic:
978-1-62708-192-4
Publication date:
2017
Book Chapter

Lubrication and Wear in Rolling

By
Dongbin Wei
Dongbin Wei
University of Technology Sydney
Search for other works by this author on:
Wenzhen Xia
Wenzhen Xia
University of Wollongong
Search for other works by this author on:
Zhengyi Jiang
Zhengyi Jiang
University of Wollongong
Search for other works by this author on:
Liang Hao
Liang Hao
Xidian University
Search for other works by this author on:
Published:
2017
Page range:
748 - 767
Publication history
November 21, 2017

Abstract

Rolling is the process of reducing the thickness or changing the cross section of a workpiece by compressive forces applied through a set of rolls. This article emphasizes flat rolling and illustrates basic flat-rolling process used to reduce the thickness of a rectangular cross section. It provides a discussion on hot rolling, cold rolling, and warm rolling, as well as lubrication in rolling. The article reviews the lubrication for iron-base and nickel-base materials, light metals, copper-base alloys, and titanium alloys. It discusses the wear mechanism in rolling: abrasion, adhesion, and fatigue, as well as oxidative and corrosive wear. Surface modification techniques, such as hardening by induction heat treating, weld overlay, thermal spray coating, coating via physical vapor deposition (PVD), and laser surface treatment, are also discussed for improving roll service life.

You do not currently have access to this content.
Don't already have an account? Register

Dongbin Wei, Wenzhen Xia, Zhengyi Jiang, Liang Hao, 2017. "Lubrication and Wear in Rolling", Friction, Lubrication, and Wear Technology, George E. Totten

Download citation file:


×
Close Modal
This Feature Is Available To Subscribers Only

Sign In or Create an Account

Close Modal
Close Modal