Skip to Main Content
ASM Desk Editions

Metals Handbook Desk Edition

Edited by
Joseph R. Davis
Joseph R. Davis
Davis & Associates
Search for other works by this author on:
ASM International
ISBN electronic:
978-1-62708-199-3
Publication date:
1998
Book Chapter

High-Density Ferrous Powder Metallurgy Parts

Published:
1998
Page range:
340 - 345

Abstract

This article discusses the production of low-alloy steel parts by powder forging, focusing on the material considerations, such as hardenability and inclusion assessment; and process considerations, including sintering and reheating, metal flow, and secondary operations. It presents the mechanical property data for copper and graphite powders mixed with an iron powder base to produce materials that generally contain 2″ Cu, including tensile, impact, and fatigue properties. Heat treatment procedures used in developing the properties of the prealloyed powder forged materials are also covered. Finally, the article describes the process steps and cost considerations in metal injection molding (MIM) and tabulates the composition, and mechanical properties of MIM low-alloy steels.

You do not currently have access to this content.
Don't already have an account? Register

1998. "High-Density Ferrous Powder Metallurgy Parts", Metals Handbook Desk Edition, Joseph R. Davis

Download citation file:


×
Close Modal
This Feature Is Available To Subscribers Only

Sign In or Create an Account

Close Modal
Close Modal