Skip to Main Content
ASM Handbook

Mechanical Testing and Evaluation

Edited by
Howard Kuhn
Howard Kuhn
Search for other works by this author on:
Dana Medlin
Dana Medlin
Search for other works by this author on:
ASM International
Volume
8
ISBN electronic:
978-1-62708-176-4
Publication date:
2000
Book Chapter

Testing for Deformation Modeling

By
Dan Zhao
Dan Zhao
Johnson Controls, Inc.
Search for other works by this author on:
Published:
2000
Page range:
798 - 810

Abstract

Forming processes can be divided into three major categories: bulk forming, sheet-metal forming, and semisolid forming and polymer extrusion. This article introduces each process category with a description of the constitutive models. It outlines the required properties for process modeling and describes the test methods for determining these properties. The article discusses several compression tests used to determine stress-strain curves for bulk forming and tensile tests used to obtain stress-strain curves for sheet-metal forming. The article concludes with information on the measurement of viscosity of semisolid alloy materials by using three types of viscometers: the coaxial cylinder viscometer, the cone-and-plate viscometer, and the capillary viscometer.

You do not currently have access to this content.
Don't already have an account? Register

Dan Zhao, 2000. "Testing for Deformation Modeling", Mechanical Testing and Evaluation, Howard Kuhn, Dana Medlin

Download citation file:


×
Close Modal
This Feature Is Available To Subscribers Only

Sign In or Create an Account

Close Modal
Close Modal