Skip to Main Content
Book Chapter

Credits

Published:
2004

Officers and Trustees of ASM International (2003–2004)

Officers

  • Robert C. Tucker, Jr., President and Trustee

    The Tucker Group LLC

  • Andrew R. Nicoll, Sulzer Metco (U.S.) Inc.

    Vice President and Trustee

  • Donald R. Muzyka, Immediate Past President and Trustee

    Special Metals Corporation (retired)

  • Paul L. Huber, Treasurer

    Seco/Warwick Corporation

  • Stanley C. Theobald, Secretary and Managing Director

    ASM International

Trustees

  • Reza Abbaschian, University of Florida

  • Rodney R. Boyer, Boeing Commercial Airplane Group

  • Dianne Chong, The Boeing Company

  • Roger J. Fabian, Bodycote Thermal Processing

  • William E. Frazier, Naval Air Systems Command

  • Richard L. Kennedy, Allvac

  • Richard D. Sisson, Jr., Worcester Polytechnic Institute

  • George F. Vander Voort, Buehler Ltd.

  • Lawrence C. Wagner, Texas Instruments

Members of the ASM Handbook Committee (2003–2004)

  • Henry E. Fairman, (Chair 2002–; Member 1993–)

    Cincinnati Metallurgical Consultants

  • Jeffrey A. Hawk, (Vice Chair 2002–; Member 1997–)

    U.S. Department of Energy

  • David E. Alman (2002–)

    U.S. Department of Energy

  • Bruce P. Bardes (1993–)

    Cincinnati Metallurgical Consultants

  • Lichun Leigh Chen (2002–)

    Engineered Materials Solutions

  • Craig V. Darragh (1989–)

    The Timken Company

  • Larry D. Hanke (1994–)

    Materials Evaluation and Engineering Inc.

  • Michael A. Hollis (2003–)

    Delphi Corporation

  • Dennis D. Huffman (1982–)

    The Timken Company (retired)

  • Dwight Janoff (1995–)

    FMC Corporation

  • Kent L. Johnson (1999–)

    Engineering Systems Inc.

  • Paul J. Kovach (1995–)

    Stress Engineering Services Inc.

  • Donald R. Lesuer (1999–)

    Lawrence Livermore National Laboratory

  • Huimin Liu (1999–)

    Ford Motor Company

  • Alan T. Male (2003–)

    University of Kentucky

  • William L. Mankins (1989–)

    Metallurgical Services Inc.

  • Srikanth Raghunathan (1999–)

    Nanomat Inc.

  • Karl P. Staudhammer (1997–)

    Los Alamos National Laboratory

  • Kenneth B. Tator (1991–)

    KTA-Tator Inc.

  • George F. Vander Voort (1997–)

    Buehler Ltd.

Previous Chairs of the ASM Handbook Committee

  • R.J. Austin, (1992–1994) (Member 1984–)

  • L.B. Case, (1931–1933) (Member 1927–1933)

  • T.D. Cooper, (1984–1986) (Member 1981–1986)

  • C.V. Darragh, (1999–2002) (Member 1989–)

  • E.O. Dixon, (1952–1954) (Member 1947–1955)

  • R.L. Dowdell, (1938–1939) (Member 1935–1939)

  • M.M. Gauthier, (1997–1998) (Member 1990–)

  • J.P. Gill, (1937) (Member 1934–1937)

  • J.D. Graham, (1966–1968) (Member 1961–1970)

  • J.F. Harper, (1923–1926) (Member 1923–1926)

  • C.H. Herty, Jr., (1934–1936) (Member 1930–1936)

  • D.D. Huffman, (1986–1990) (Member 1982–)

  • J.B. Johnson, (1948–1951) (Member 1944–1951)

  • L.J. Korb, (1983) (Member 1978–1983)

  • R.W.E. Leiter, (1962–1963) (Member 1955–1958, 1960–1964)

  • G.V. Luerssen, (1943–1947) (Member 1942–1947)

  • G.N. Maniar, (1979–1980) (Member 1974–1980)

  • W.L. Mankins, (1994–1997) (Member 1989–)

  • J.L. McCall, (1982) (Member 1977–1982)

  • W.J. Merten, (1927–1930) (Member 1923–1933)

  • D.L. Olson, (1990–1992) (Member 1982–1988, 1989–1992)

  • N.E. Promisel, (1955–1961) (Member 1954–1963)

  • G.J. Shubat, (1973–1975) (Member 1966–1975)

  • W.A. Stadtler, (1969–1972) (Member 1962–1972)

  • R. Ward, (1976–1978) (Member 1972–1978)

  • M.G.H. Wells, (1981) (Member 1976–1981)

  • D.J. Wright, (1964–1965) (Member 1959–1967)

Authors and Contributors

  • Brent L. Adams, Brigham Young University

  • Debbie Aliya, Aliya Analytical, Inc.

  • David Alman, Albany Research Center, U.S. Dept. of Energy

  • Roland Aubin, Amsco Cast Products (Canada) Inc.

  • Steven Axdal, Seagate Technology Inc.

  • William Baldwin, ChevronTexaco

  • Bruce Bardes, Cincinnati Metallurgical Consultants LLC

  • Bob Barth, Olin Brass

  • Kurt W. Batson, The Boeing Company

  • Peter Bauer, Leica Microsystems

  • Arlan O. Benscoter, Lehigh University

  • Michael Blum, Materials Technology Associates Inc.

  • Richard Bodnar, International Steel Group, Inc.

  • Rodney R. Boyer, The Boeing Company

  • Bruce L. Bramfitt, International Steel Group, Inc.

  • Amarjit S. Brar, Seagate Technology Inc.

  • Robert D. Briggs, The Boeing Company

  • Thomas Calahan, Carl Zeiss, Inc.

  • Veronika Carle, Max-Planck Institut für Metallforschung

  • R.N. Caron, Olin Brass

  • Lichun Leigh Chen, Engineered Materials Solutions

  • Richard C. Compton, Zimmer, Inc.

  • Lesley Cornish, MINTEK

  • W. Raymond Cribb, Brush Wellman Inc.

  • Paul Crook, Haynes International

  • Paul E. Danielson, Albany Research Center, U.S. Dept. of Energy

  • Joseph R. Davis, Davis & Associates

  • M. Dayananda, Purdue University

  • Ryan M. Deacon, Lehigh University

  • Raymond L. Decker, Thixomat, Inc.

  • Robert T. DeHoff, University of Florida

  • Omer Dogan, Albany Research Center, U.S. Dept. of Energy

  • Roger Doherty, Drexel University

  • Charles W. Domby, The Boeing Company

  • Timothy Eck, Alcoa Mill Products

  • Mario Epler, Lehigh University

  • Craig Eucken, Wah Chang

  • H.E. Exner, Darmstadt University of Technology

  • Henry E. Fairman, Cincinnati Metallurgical Consultants LLC

  • David P. Field, Washington State University

  • Luther M. Gammon, The Boeing Company

  • Frank C. Gift, Jr., Lehigh University

  • Arun Gokhale, Georgia Institute of Technology

  • Peter J. Goodhew, University of Liverpool

  • Martha Goodway, Smithsonian Institution

  • Stewart Grice, Hoover & Strong Inc.

  • Amitava Guha

  • Larry Hanke, Materials Evaluation & Engineering Inc.

  • Niels Hansen, Risø National Laboratory

  • John C. Harkness, Brush Wellman Inc.

  • Craig S. Hartley, Air Force Office of Scientific Research

  • Jeffrey A. Hawk, Albany Research Center, U.S. Dept. of Energy

  • Dennis W. Hetzner, The Timken Company

  • Michael J. Hoffmann, Universität Karlsruhe

  • Frauke Hogue, Hogue Metallography

  • Michael Holt, Frog, Switch and Manufacturing Company

  • Dennis D. Huffman, The Timken Company (retired)

  • Darcy Hughes, Sandia National Laboratories

  • Gene Ice, Oak Ridge National Laboratory

  • Kent L. Johnson, Engineering Systems Inc.

  • John Jorstad, J.L.J. Technologies, Inc.

  • Ann Kelly, Los Alamos National Laboratory

  • Dwaine L. Klarstrom, Haynes International

  • Jacek Komenda, Swedish Institute for Metals Research

  • Paul Kovach, Stress Engineering Services, Inc

  • Milo Kral, University of Canterbury (Australia)

  • George Krauss, Colorado School of Mines

  • Krzysztof J. Kurzydłowki, Warsaw University of Technology

  • Selcuk Kuyucak, CANMET

  • Samuel J. Lawrence, International Steel Group, Inc.

  • Todd A. Leonhardt, Rhenium Alloys Inc.

  • Heiner Lichtenberger, Williams Advanced Materials Inc.

  • Huimin Liu, Ford Motor Company

  • Gabriel M. Lucas, Buehler Ltd.

  • Elena P. Manilova, Polzunov Central Boiler and Turbine Institute (Russia)

  • William L. Mankins, Metallurgical Services, Inc.

  • Arnold R. Marder, Lehigh University

  • Dana J. Medlin, Zimmer, Inc.

  • M.K. Miller, Oak Ridge National Laboratory

  • John E. Morral, The Ohio State University

  • Yellapu V. Murty, CMI, Inc.

  • Brian Newbury, Lehigh University

  • Rick Noecker, Lehigh University

  • Michael Notis, Lehigh University

  • James J. Oakes, Metalworking Products

  • Sidnei Paciornik, DCMM PUC-Rio

  • John M. Packard, The Boeing Company

  • Toby V. Padfield, ZF Sachs Automotive of America

  • Shane Para, Lehigh University

  • Leander F. Pease, III, Powder-Tech Associates, Inc.

  • Matthew J. Perricone, Lehigh University

  • Samuel M. Purdy

  • Janina M. Radzikowska, The Foundry Research Institute (Kraków)

  • Brian Ralph, Brunel University

  • Jonathan Regina, Lehigh University

  • Maria Richert, University of Mining & Metallurgy (Kraków)

  • R.O. Rosenberg, Naval Research Laboratory

  • Roxana Ruxanda, The University of Alabama

  • A.T. Santhanam, Kennametal Inc.

  • John P. Sauer, Sauer Engineering

  • Ute Schäfer, Max-Planck Institut für Metallforschung

  • Shahram Shebany, Pacific Metallurgical Company

  • Robert C. Solbach

  • Karl P. Staudhammer, Los Alamos National Laboratory

  • Doru M. Stefanescu, The University of Alabama

  • Jeff Stewart, Stern Leach Company

  • Rainer Süss, MINTEK

  • Richard C. Sutherlin, Wah Chang

  • Janusz Szala, Silesian University of Technology

  • Jerzy A. Szpunar, McGill University

  • Ulrike Täffner, Max-Planck Institut für Metallforschung

  • Keith Taylor, International Steel Group Inc.

  • Stefanie Taylor, MINTEK

  • Derek E. Tyler, Olin Metals Research Laboratory

  • M.D. Uchic, Air Force Research Laboratory

  • Elma van der Lingen, MINTEK

  • George Vander Voort, Buehler Ltd.

  • Edward J. Vinarcik, Robert Bosch Corporation

  • Fran Warmuth, Wyman-Gordon Forgings

  • Małgorzata Warmuzek, Foundry Research Institute (Poland)

  • Michael L. Wayman, University of Alberta

  • S. Weinbruch, Darmstadt University of Technology

  • Matthew A. Willard, Naval Research Laboratory

  • Richard D. Wilson, Albany Research Center, U.S. Department of Energy

  • Leczek D. Wojnar, Krakow University of Technology

  • J. Wu, Deloro Stellite Group Limited

Staff

ASM International staff who contributed to the development of the Volume included Steven R. Lampman, Project Editor; Bonnie R. Sanders, Manager of Production; Gayle J. Anton, Editorial Assistant; Carol Polakowski, Production Supervisor; Jill Kinson, Production Editor; Kathryn Muldoon, Production Assistant; Scott D. Henry, Senior Manager, Product and Service Development ; and William W. Scott, Jr., Director of Technical Publications

2004. "Credits", Metallography and Microstructures, George F. Vander Voort

Download citation file:


×

Send Email

Recipient(s) will receive an email with a link to 'Metallography and Microstructures > Credits' and will not need an account to access the content.






Subject: Metallography and Microstructures > Credits

(Optional message may have a maximum of 1000 characters.)

×

Contents

ASM Handbook

Metallography and Microstructures

Edited by
George F. Vander Voort
George F. Vander Voort
Search for other works by this author on:
ASM International
Volume
9
ISBN electronic:
978-1-62708-177-1
Publication date:
2004

Advertisement

Mager

Mager Scientific is your exclusive source for Qness hardness testing equipment in the United States.

Learn More >

Figures & Tables

References

Close Modal
This Feature Is Available To Subscribers Only

Sign In or Create an Account

Close Modal
Close Modal