Skip to Main Content
ASM Handbook

Failure Analysis and Prevention

Edited by
William T. Becker
William T. Becker
Search for other works by this author on:
Roch J. Shipley
Roch J. Shipley
Search for other works by this author on:
ASM International
Volume
11
ISBN electronic:
978-1-62708-180-1
Publication date:
2002
Book Chapter

Failures of Rolling-Element Bearings[1]

By
Ronald L. Widner
Ronald L. Widner
Revising author
The Timken Company
Search for other works by this author on:
Published:
2002

Abstract

Rolling-element bearings use rolling elements interposed between two raceways, and relative motion is permitted by the rotation of these elements. This article presents an overview of bearing materials, bearing-load ratings, and an examination of failed bearings. Rolling-element bearings are designed on the principle of rolling contact rather than sliding contact; frictional effects, although low, are not negligible, and lubrication is essential. The article lists the typical characteristics and causes of several types of failures. It describes failure by wear, failure by fretting, failure by corrosion, failure by plastic flow, failure by rolling-contact fatigue, and failure by damage. The article discusses the effects of fabrication practices, heat treatment and hardness of bearing components, and lubrication of rolling-element bearings with a few examples.

You do not currently have access to this content.
Don't already have an account? Register

Ronald L. Widner, 2002. "Failures of Rolling-Element Bearings", Failure Analysis and Prevention, William T. Becker, Roch J. Shipley

Download citation file:


×
Close Modal
This Feature Is Available To Subscribers Only

Sign In or Create an Account

Close Modal
Close Modal